• 한국지반공학회논문집
• /
• 제22권10호
• /
• pp.47-54
• /
• 2006

H pile은 원형말뚝에 비해 항타에 의해 쉽게 관입이 되며, 높은 주면마찰력과 폐색효과를 나타내는 특징을 가지고 있다. 본 연구에서는 실내시험을 통한 화강풍화토 지반에 관입된 H형강 무리말뚝의 주면마찰력 분포특성을 관찰하는데 목적이 있다. 말뚝의 배열$(1{\times}2,\;1{\times}3,\;2{\times}2,\;2{\times}3,\;3{\times}3)$, 말뚝설치간격(2D, 4D, 6D)과 지반밀도(40%, 80%)에 따른 재하시험을 실시하였다. 실험결과 전체 재하중에 대한 주면마찰력의 분포비율은 $3{\times}3$ 무리말뚝의 경우 말뚝간격비가 증가할수록 조밀한 지반의 경우 $48{\sim}39%$, 느슨한 지반의 경우에는 $32{\sim}27%$로 각각 감소하였다 그리고 말뚝침하량에 따른 주면마찰력 분포비율은 느슨한 지반조건에서 $2{\times}2$무리말뚝의 경우 $58{\sim}33.2%$, $3{\times}3$무리말뚝의 경우 $65{\sim}38%$로 각각 감소되었다.

• 한국수자원학회논문집
• /
• 제52권1호
• /
• pp.1-10
• /
• 2019

본 연구에서는 분류부 흐름에 대한 TELEMAC-2D 2차원 수치모형의 적용성을 검증하고, 수치실험을 통한 분류유량비 계산식의 비교분석, 분류유량비 변화에 따른 분류부 흐름특성 변화를 분석하였다. 본 수치모형은 분류부 수심평균 유속분포와 수위에 대해 실내실험결과와 잘 일치하는 결과를 나타냈다. 주수로의 하류방향 관성력과 모멘트가 감소하면 분류유량비가 증가하게 되고, 분류수로에서 상대적인 고유속 분포구간은 넓어지며, 분류수로 주흐름의 역방향 유속은 감소한다. 분류유량비가 증가할수록 분류수로 내 흐름분리구역 규모는 감소하며, 흐름분리구역 규모 산정시 유선분포 작도뿐만 아니라 종방향 프루우드 수가 $Fr{\approx}0$이 되는 지점 확인으로 더 명확하게 산정할 수 있다.

• 유통과학연구
• /
• 제14권3호
• /
• pp.39-44
• /
• 2016

Purpose - The purpose of this research is to investigate whether Korea's economic growth can be explained by the endogenous growth theory. Specifically, we test whether R&D expenditure has a positive and significant effect on the economic growth. Research design, data, and methodology - We hypothesize that R&D expenditure has a positive effect on the economic growth after adding control variables in the growth equation. Korean annual data from 1963 to 2011 from Science and Technology Annual of the Ministry of Education, Science and Technology, the Bank of Korea, etc. are used. We estimate the growth equation by GMM in addition to OLS. Results - We found that R&D expenditure has a positive and significant effect on the economic growth after adding the ratio of investment to GDP, the ratio of FDI to GDP, the ratio of government expenditure to GDP, inflation and the ratio of trade openness to GDP as control variables in the growth equation. Conclusions - Our results show that Korea's rapid economic growth for the past five decades can be explained by the R&D-based endogenous economic growth theory. Our results suggest that the policy attention of the Korean government be paid to R&D promotion.

• 한국전자파학회논문지
• /
• 제18권9호
• /
• pp.1057-1063
• /
• 2007

이동 통신 시스템의 성능 분석을 위해서는 정확한 신호 대 간섭비(Carrier-to-Interference Ratio: C/I)에 대한 정보가 중요하다. 셀 내에 간섭원(interferer)이 존재하는 경우, 수신기의 신호 대 간섭 비는 수신기와 정보원의 거리$(d_0)$와 수신기와 간섭원의 거리$(d_1)$의 비에 의해 결정된다. 본 논문에서는 정보원, 간섭원 및 수신기의 지정학적 관계를 이용해서 $d_0/d_1$의 값에 따른 신호 대 간섭비의 분포를 유도하고, 이를 실험 결과와 비교 및 검증한다. 또한, 제시된 모델을 활용하여 인접 채널 간섭이 존재하는 상황에 적용시, 간섭 영향에 따른 outage 확률을 분석한다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.784-791
• /
• 2008

In this study, we recognized about application of the load distribution factor for design of tunnel in 3D numerical analysis. Generally, load distribution factor of tunnel is applied to describe 3D arching effect that can not describe when 2D numerical analysis. Through result of 3D numerical analysis, we used to apply in numerical analysis for the load distribution factor that ratio of finally displacement to displacement of construction step. But 3D numerical analysis need to apply to load distribution factor for convenience of numerical analysis. Therefore, we proposed load distribution factor that reduce time and coast. It corrected variable of advanced length in load distribution factor of 3D numerical analysis.

• 분석과학
• /
• 제11권4호
• /
• pp.248-253
• /
• 1998

수용액에서 poly-dibenzo-18-crown-6를 이용한 알칼리, 알칼리토금속이온 및 전이금속이온들의 흡착 및 분리특성을 조사하였다. 알칼리금속이온들과 알칼리토금속이온들의 흡착정도와 분포비의 순위는 각각 Li(I)

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2005년도 추계학술발표대회 논문집
• /
• pp.66-69
• /
• 2005

Mechanical strength of functionally graded composite plates that composed of ceramic, functionally graded material and metal layers is investigated using 3-D finite element method. In FGM layer, material properties are assumed to be varied continuously in the thickness direction according to a simple power law distribution in terms of the volume fraction of a ceramic and metal. The 3-D finite element model is adopted by using an IS-node solid element to analyze more accurately the variation of material properties in the thickness direction. Numerical results are compared with those of the previous works. In addition, the displacements, the tensile stresses and the compressive stresses are analyzed for the variation of FGM thickness ratio and volume fraction distribution.Mechanical strength of functionally graded composite plates that composed of ceramic, functionally graded material and metal layers is investigated using 3-D finite element method. In FGM layer, material properties are assumed to be varied continuously in the thickness direction according to a simple power law distribution in terms of the volume fraction of a ceramic and metal. The 3-D finite element model is adopted by using an IS-node solid element to analyze more accurately the variation of material properties in the thickness direction. Numerical results are compared with those of the previous works. In addition, the displacements, the tensile stresses and the compressive stresses are analyzed for the variation of FGM thickness ratio and volume fraction distribution.

• 대한설비공학회지:설비저널
• /
• 제17권6호
• /
• pp.708-716
• /
• 1988

Local heat transfer coefficients were measured on semi-cylinders on which a circular water jet impinged in crossflow. The ratio of the semi-cylinder's diameter and the nozzle outlet diameter were varied parametrically, as were the Reynolds number and the supplementary water heights. The measurements showed that the circumferential distribution of the heat transfer coefficient peaked at the stagnation point. For a fixed supplementary water height, the peak heat transfer coefficient was not depend on the curvature of test specimen(d/D). Optimum height of supplementary water which brought about the augmentation of heat transfer at the stagnation point was S/D=1. The Nusselt number decreased as the circumferential distance or angle increased. The circumferential distribution of dimensionless heat transfer (Nu/Nus) was independent of d/D ($d/D{\geq}8.33$), but for the d/D<8.33, it was depended on d/D. At a fixed angle of specimen, dimensionless heat transfer (Nu/Nus) decreased as the ratio d/D increased. The extent of the decrease between d/D=6.67 and 8.33 was markedly greater than that between d/D=8.33 and 10, or d/D=10 and 11.67.

• Fisheries and Aquatic Sciences
• /
• 제26권3호
• /
• pp.224-233
• /
• 2023

This research was conducted at Langgur City, Southeast Maluku Regency, Maluku Province, Eastern Indonesia from November 2020 to February 2021 to study biological aspects of roundscads (Decapterus spp.) which consist of species composition, sex ratio, gonad maturation level, size distribution, length-weight relationship and condition factor. Samples were collected at traditional fish market in Langgur City. Fish samples collected at the market were put into cool box and then brought to the laboratory for further examination. Fish samples were identified, separated based on species, dissected to determine their sex and gonad maturation stage and then measured. Totally, there were 290 specimen collected which consist of five species namely Decapterus kurroides, D. macarellus, D. macrosoma, D. muroadsi and D. russelli. Sex ratio between male and female for all species showed 1:1. Gonad maturation level showed that stage I and II have higher percentage than stage III and IV indicates immature fish more dominant compare to mature one. Among five species found, D. macarellus has larger size while the smaller belongs to D. muroadsi. Results of length-weight relationship analysis showed that roundscads inhabiting Southeast Maluku waters have isometric and negative allometric growth pattern with relative condition factor around 1.00.

• Steel and Composite Structures
• /
• 제21권1호
• /
• pp.57-72
• /
• 2016

The Poisson ratio reduction of symmetric hygrothermal aged $[{\theta}_m/90_n]_s$ composite laminates containing a transverse cracking in mid-layer is predicted by using a modified shear-lag model. Good agreement is obtained by comparing the prediction models and experimental data published by Joffe et al. (2001). The material properties of the composite are affected by the variation of temperature and transient moisture concentration distribution in desorption case, and are based on a micro-mechanical model of laminates. The transient and non-uniform moisture concentration distribution give rise to the transient Poisson ratio reduction. The obtained results represent well the dependence of the Poisson ratio degradation on the cracks density, fibre orientation angle of the outer layers and transient environmental conditions. Through the presented study, we hope to contribute to the understanding of the hygrothermal behaviour of cracked composite laminate.