• 대한전기학회논문지:전력기술부문A
• /
• 제55권11호
• /
• pp.476-484
• /
• 2006

The failure prediction and preventive maintenance for the equipment of nuclear power plant area using reliability-centered maintenance have been grown. On the other hand, the maintenance for power distribution system consists of time-based maintenance mainly. In this paper, the new maintenance algorithms for power distribution system are developed considering reliability indices. First of all, Time-varying failure rates are extracted from data accumulated at KEPCO using exponential distribution function and weibull distribution function. Next, based on the extracted failure rate, reliability for real power distribution system is evaluated for applying the effective maintenance algorithm which is the analytic method deciding the maintenance point of time and searching the feeder affecting the specific customer. Also the algorithm deciding the maintenance priority order are presented based on sensitivity analysis and equipment investment plan are analyzed through the presented algorithm at real power distribution system.

• Journal of the Korean Statistical Society
• /
• 제28권3호
• /
• pp.279-296
• /
• 1999

In this paper we establish some recurrence relations for both single and product moments of order statistics from a doubly truncated linear- exponential distribution with increasing hazard rate. These recurrence relations would enable one to compute all the higher order moments of order statistics for all sample sizes from those of the lower order in a simple recursive way. In addition, percentage points of order statistics are also discussed. These generalize the corresponding results for the linear- exponential distribution with increasing hazard rate derived by Balakrishnan and Malik(1986)

• Journal of Biosystems Engineering
• /
• 제34권3호
• /
• pp.183-189
• /
• 2009

Environmental conditions may cause the quality change of fruits during distribution after harvest. In order to prevent the damage or quality change of fruits for distribution, the characteristic of fruits affected by the environmental conditions such as temperature, humidity under various distribution conditions should be known. This research was performed to analyze how the environmental conditions affect the factors such as weight loss rate and ethylene production of the peach under several distribution conditions. Environmental conditions of the actual distributed route were evaluated and the data obtained from the conditions were used for the simulated environmental tests. Regression models of the weight loss rate and the ethylene production of peach were developed and used in predicting peach quality. The weight loss rate of the peach estimated by the ASHRAE data was shown the higher value on the transportation temperature condition than on the low and room temperature conditions. The weight loss rate and the ethylene production of the peach on the simulated distribution conditions were measured and the measured weight loss rate of peach was the smaller than the theoretically estimated one. The regression models of the weight loss rate and the ethylene production were developed respectively.

• 한국통신학회논문지
• /
• 제33권7B호
• /
• pp.528-537
• /
• 2008

본 논문은 NoC 시스템에서 수행되는 멀티미디어 application에서 deadlock과 패킷 drop율을 최소화하기 위한 hybrid 구조의 네트워크 토폴로지와 job distribution 알고리듬을 제안한다. 제안된 NoC 시스템은 멀티미디어 application에 따라 패킷 drop율이 최소화될 수 있는 네트워크 토폴로지를 적용하여 sub-cluster에 배정하고, 수행되는 application은 sub-cluster 내의 네트워크 상황을 고려하여 동적 round-robin 방식의 스케줄링을 수행한다. 본 연구에서는 hybrid 네트워크 토폴로지와 동적인 job distribution을 통해 네트워크에 발생하는 트래픽을 분산시킴으로써 패킷 deadlock과 패킷 drop율을 최소화하는 알고리듬을 제시하였다. 제안된 시스템의 성능을 검증하기 위해 임베디드 시스템에서 사용되는 멀티미디어 application 중 MPEG4 동영상 재생, MPEG1 audio layer-3(MP3) 재생, GPS 위치 계산, OFDM 복조를 대상으로 실험하였다. 실험결과 제안된 job distribution 알고리듬에 적용된 시스템은 기존의 APSRA 알고리듬에 비해 패킷 drop율이 평균 13% 감소하고 면적은 2.7% 증가하였다. 또한 deadlock 감소의 비교 대상으로 흔히 사용되는 XY 알고리듬을 본 구조에 맞게 변경한 알고리듬에 대해 패킷 drop율은 평균 23.9% 감소하고 면적은 3.0% 증가하였다.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제18권3호
• /
• pp.220-228
• /
• 2018

Purpose: The purpose of this study is to investigate the tail behavior of the life distribution which exhibits an increasing failure rate or other positive aging effects after a certain time point. Methods: We characterize the tail behavior of the life distribution with regard to certain reliability measures such as failure rate, mean residual life and reliability function and derive several stochastic properties regarding such life distributions. Also, utilizing an L-statistic and its asymptotic normality, we propose new nonparametric testing procedures which verify if the life distribution has an increasing tail failure rate. Results: We propose the IFR-Tail (Increasing Failure Rate in Tail), DMRL-Tail (Decreasing Mean Residual Life in Tail) and NBU-Tail (New Better than Used in Tail) classes, all of which represent the tail behavior of the life distribution. And we discuss some stochastic properties of these proposed classes. Also, we develop a new nonparametric test procedure for detecting the IFR-Tail class and discuss its relative efficiency to explore the power of the test. Conclusion: The results of our research could be utilized in the study of wide range of applications including the maintenance and warranty policy of the second-hand system.

• 대한전기학회논문지:전력기술부문A
• /
• 제54권11호
• /
• pp.548-556
• /
• 2005

Reliability evaluation of power distribution system is very important to both power utilities and customers. It present the probabilistic number and duration of interruption such as failure rate, SATDI, SAIFI, and CAIDI. However, it has a fatal weakness at reliability index because of accuracy of failure rate. In this paper, the Time-varying Failure Rate(TFR) of power distribution system equipment is extracted from the recorded failure data of KEPCO(Korea Electric Power Corporation) in Korea. For TFR extraction, it is used that the fault data accumulated by KEPCO during 10 years. The TFR is approximated to bathtub curve using the exponential(random failure) and Weibull(aging failure) distribution function. In addition, Kaplan-Meier estimation is applied to TFR extraction because of incomplete failure data of KEPCO. Finally, Probability plot and regression analysis is applied. It is presented that the extracted TFR is more effective and useful than Mean Failure Rate(MfR) through the comparison between TFR and MFR

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 추계학술대회 논문집 전력기술부문
• /
• pp.272-274
• /
• 2003

Distribution system reliability evaluation estimates by approach methods such as Makove modelling or Monte Carlo simulation, equation of state and failure rate that is on one basic data used to these assessment technique is described as probability of average value. because average failure rate equipment device is aged as time goes by but there is shortcoming that such used failure rate does not evaluate thing which is correct in reliability change hereafter. In this paper, failure rate displayed that apply aging to basis equipment device by passing time using Weibull distribution one of life evaluation method and for express aging of component from utility's failure database.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제11권1호
• /
• pp.165-177
• /
• 2019

This paper considers corrosion wastage of two ship hull structure members as a part of investigated fuel oil tanks of 25 aging bulk carriers. Taking into account that many factors which influence corrosion wastage of ship hull structures are of uncertain nature, the related corrosion rate ($c_1$) is considered here as a real-valued continuous distribution, assuming that the corrosion wastage starts after 5, 6 or 7 years. In all considered cases, by using available data and applying three basic statistical tests, it is established that between two-parameter continuous distributions, normal, Weibull and logistic distributions are best fitted distributions for the mentioned corrosion rate ($c_1$). Note that the presented statistical, numerical and graphical results concerning two mentioned ship hull structure members allow to compare and discuss the corresponding probabilistic estimates for the corrosion rate ($c_1$).

• 한국환경과학회지
• /
• 제5권3호
• /
• pp.337-346
• /
• 1996

The purpose of this study was to provide basic data of the growth characteristics of the landscape trees for better landscape planting design, construction and maintenance through the prediction of landscape change as time passes fly the analysis of survival rate, distribution patterns & increment percent of tree height, width, stem diameter (breast or surface) of widely used six tree species in Seongnam-si Eunhang-jugong apartment housing areas (8 years have passed after landsape alanting work). The main results can be summarized as followed. The tree survival rate of Pinus parviflora was the highest rate 89.2% than any other species, but Acer buergerianum showed the lowest survival rate at that of it 35.0%, & that of Picea abies 70.5 %, Metasequoia glyptostroboides 71.6%, Maknolia denudata 38.9%, Acer paimatum was 71.7%, As a whole, the tree survival rate of coniferous trees were relatively high. The tree height increment percent of the deciduous species wert relatively high. And that of Metasequoia glyptostroboides was the highest rate 11.61% than any other species, but that of Magnolia denudata was the lowest rate 5.59% than any other species. According to this results, the increment percent of trees in this apartment areas were comparatively lower than that of each related species planted in nursery area. And this results would be considered when landscape experts do landscape planting design, construction & maintenance. The distribution patterns of present tree size showed a Normal Distribution like any other biological features.

• International Journal of Reliability and Applications
• /
• 제3권1호
• /
• pp.1-16
• /
• 2002

In reliability engineering, the bathtub-shaped hazard rates play an important role in survival analysis and many other applications as well. For the bathtub-shaped, initially the hazard rate decreases from a relatively high value due to manufacturing defects or infant mortality to a relatively stable middle useful life value and then slowly increases with the onset of old age or wear out. In this paper, we present a new two-parameter lifetime distribution function, called the Loglog distribution, with Vtub-shaped hazard rate function. We illustrate the usefulness of the new Vtub-shaped hazard rate function by evaluating the reliability of several helicopter parts based on the data obtained in the maintenance malfunction information reporting system database collected from October 1995 to September 1999. We develop the S-Plus add-in software tool, called Reliability and Safety Assessment (RSA), to calculate reliability measures include mean time to failure, mean residual function, and confidence Intervals of the two helicopter critical parts. We use the mean squared error to compare relative goodness of fit test of the distribution models include normal, lognormal, and Weibull within the two data sets. This research indicates that the result of the new Vtub-shaped hazard rate function is worth the extra function-complexity for a better relative fit. More application in broader validation of this conclusion is needed using other data sets for reliability modeling in a general industrial setting.