• The Journal of Engineering Geology
• /
• v.25 no.3
• /
• pp.387-393
• /
• 2015

Fault breccia, produced by fracturing and comminution of host rock during fault activity, is a common component within fault cores. Fault breccia may display a preferred orientationin accordance with the sense of motion on the fault. Here we use a numerical analysis technique to study the effects of the distribution and content of breccia in fault core on the elastic moduli. The analytical models are grouped into those in which breccias display a preferred orientation within fault core and those in which breccias are randomly oriented. The breccia compositions considered here are granite and shale, and the breccia contents are 10 wt%, 20 wt%, and 30 wt%. Our results show that for all the cases considered, differences in the deformation moduli fall within the range 0.1%~1.1% and differences in the elastic moduli fall within the range 0.02~0.4 MPa. Thus, the distribution and content of fault breccia have almost no effect on the elastic moduli.

• Economic and Environmental Geology
• /
• v.53 no.2
• /
• pp.167-181
• /
• 2020

Analysis of variance (ANOVA) and multiple comparison analysis were performed for shear strengths categorized by breccia content of 5 wt.% (Case-I), 10 wt.%, (Case-II) and 15 wt.% (Case-III) in fault cores. The relationship between breccia contetnt and shear strength was quantitatively classified by calculating the mean and standard deviation of shear strength for each population in each case and then the grouping the breccia contents that had a statistically similar effect on the dispersion of shear strength. As a result, shear strength was clearly classified into group 1 (breccia content of 0-15 wt.%) and group 2 and 3 (breccia coantent of 15-30 wt.% and 30 wt.% or more) in Case-III. Shear strength of the standard line at breccia content of 15 wt.% were determined to be 43.6 kPa, 77.6 kPa, and 118.6 kPa at each normal stress (54 kPa, 108 kPa, and 162 kPa), respectively. In addition, the distribution range of cohesions is 0-43.6 kPa at breccia content of 15 wt.% or less, and 0-70.0 kPa at 15 wt.% or more. Distribution range of friction angles is 0-45.7 ° at breccia content of 15 wt.% or less, and 16.7-57.5 ° at 15 wt.% or more.

• Economic and Environmental Geology
• /
• v.45 no.5
• /
• pp.487-502
• /
• 2012

This paper is focused on mineral compositions, microstructures and distributional characters of remained grains in the fault rocks collected from a fault developed in Yongdang-ri, Yangbuk-myeon, Gyeongju City, Korea, using X-ray diffraction (XRD), optical microscope, laser grain size analysis and fractal dimension analysis methods. The exposed fault core zone is about 1.5 meter thick. On the average, the breccia zone is 1.2 meter and the gouge zone is 20cm thick, respectively. XRD results show that the breccia zone consists predominantly of rock-forming minerals including quartz and feldspar, but the gouge zone consists of abundant clay minerals such as chlorite, illite and kaolinite. Mineral vein, pyrite and altered minerals commonly observed in the fault rock support evidence of fault activity associated with hydrothermal alteration. Fractal dimensions based on box counting, image analysis and laser particle analysis suggest that mineral grains in the fault rock underwent fracturing process as well as abrasion that gave rise to diminution of grains during the fault activity. Fractal dimensions(D-values) calculated by three methods gradually increase from the breccia zone to the gouge zone which has commonly high D-values. There are no noticeable changes in D-values in the gouge zone with trend being constant. It means that the bulk-crushing process of mineral grains in the breccia zone was predominant, whereas abrasion of mineral grains in the gouge zone took place by continuous fault activity. It means that the bulk-crushing process of mineral grains in the breccia zone was predominant, whereas abrasion of mineral grains in the gouge zone took place by continuous fault activity. Mineral compositions in the fault zone and peculiar trends in grain distribution indicate that multiple fault activity had a considerable influence on the evolution of fault zones, together with hydrothermal alteration. Meanwhile, fractal dimension values(D) in the fault rock should be used with caution because there is possibility that different values are unexpectedly obtained depending on the measurement methods available even in the same sample.

• Economic and Environmental Geology
• /
• v.6 no.2
• /
• pp.81-114
• /
• 1973

The purpose of the present study is to clarify the stratigraphy and geologic structure of the Great Limestone Series by means of study on fossil conodonts and detail investigation of geologic structure. In recent years very few geologists in Korea argue without confident evidences against the age and stratigraphy of the Great Limestone Series which have been rather well established previously in most parts of the regions although it is ambiguous and has not been studied in other areas. Five type localities in the Kangweon basin where the Great Limestone Series is well cropped out were chosen for the study. Total 26 genus and 66 species of conodont were identified from 290 samples collected and treated. From the study on conodonts the age of each formations of the Great Limestone Series has been determined as follows: The Great Limestone Series of Duwibong type Duwibong limestone: Caradocian (mid-Ord.) Jikunsan shale: Landeilian (mid-Ord.) Maggol limestone: Llanvirn-Llandeilian (mid-Ord.) Dumugol: Arenigian (Ord.) Hwajeol: Upper Cambrian The Great Limestone Series of Yeongweol type Mungok (Samtaesan) : Ordovician Machari: upper Cambrian The Great Limestone Series of Jeongseon type Erstwhile Jeongseon limestone: mid-Ord. The erstwhile Jongseon Limestone formation in Jeongseon district is separated into Hwajeol, Dongjeom, Dumudong, and Maggol formations which were cropped out repeatedly by folding and faulting, but Maggol is predominant in areal distribution. Yemi Limestone Breccia bed is not a single bed but distributed in several horizons so that it bears no stratigraphic significance. The limestone bed above Yemi Limestone Breccia, which was believed by some geologists to be much younger than Ordovician, is identified to be Maggol and its age is determined to be mid-Ordovician. Sambangsan formation in Yeongweol district was believed to be Cambrian age and lower horizon than Machari formation by Kobayashi, but C. M. Son believed that it might belong to later than Ordovician and lies above the Great Limestone Series of Yeongweol type. It was identified to be upper Cambrian and lies beneath the Machari formation and above the Daeki formation, the lower most horizon of the Great Limestone Series. The age of Yeongweol type Choseon system is contemporaneous with that of Duwibong type Choseon system. The difference in lithofacies is not due to lateral facies change, but due to the difference in its depositional environment. The Yeongweol type Choseon system is believed to be deposited in the small Yeongweol basin which was separated from the main Kangweon sedimentary basin. Judging from these facts it is definitely concluded that there exists no Gotlandian formation in the regions studied. Structurally the Kangweon basin comprises five basins and two uplifted areas. These structures were originated by at least two crustal movements, that is, Songrim disturbance of Triassic and Daebo orogeny of Jurasic age.

• Geomechanics and Engineering
• /
• v.24 no.5
• /
• pp.471-478
• /
• 2021

Water damage is one of the five disasters that affect the safety of coal mine production. The erosion of rocks by water is a very important link in the process of water inrush induced by fault activation. Through the observation and experiment of fault filling samples, according to the existing rock classification standards, fault sediments are divided into breccia, dynamic metamorphic schist and mudstone. Similar materials are developed with the characteristics of particle size distribution, cementation strength and water rationality, and then relevant tests and analyses are carried out. The experimental results show that the water-rock interaction mainly reduces the compressive strength, mechanical strength, cohesion and friction Angle of similar materials, and cracks or deformations are easy to occur under uniaxial load, which may be an important process of water inrush induced by fault activation. Mechanical experiment of similar material specimen can not only save time and cost of large scale experiment, but also master the direction and method of the experiment. The research provides a new idea for the failure process of rock structure in fault activation water inrush.

• Journal of The Geomorphological Association of Korea
• /
• v.26 no.4
• /
• pp.33-45
• /
• 2019

The shore platforms at Dok-do could be an important and clear indicator showing dimensional reduction of Dok-do. Especially flat type shore platforms are distributed in the southern coast of Dok-do island, composed of weak rocks against erosional resistance like interbedded lapilli tuff and massive tuff breccia. The distribution of shore platform is partially related to the wind direction at Dok-do island. The primary SW- and secondary SE winds are representative among wind directions at Dok-do, maintaining from spring to the autumn. Therefore, wide shore platforms could be developed by waves approaching from SW and SE directions in the southern coast of Dok-do. The sea stacks like Gunham-rock, Neopdeok-rock, Keungaje-rock and Jakeungaje-rock on the western coast are also considered to be formed by wave erosion from the SE direction. The shore platforms in the southern coast of Dok-do island were developed since ca. 7,000 yr. BP, when sea level raised almost to the present level. The average extension speed of shore platform was calculated to 4.0mm/y, because the broadest shore platform with the width ca. 28m was extended for ca. 7,000 years. The width's dimension of shore platform at Dok-do reflects a slow extension rate in the present, although erosional process will be faster with the sea level rise in the future.

• Economic and Environmental Geology
• /
• v.37 no.5
• /
• pp.555-568
• /
• 2004

The demand of aggregate resources in Korea has been increased with a rapid economic growth since the 1980s. About 25% of the total aggregate production is derived from riverine aggregates, 20% to 25% from marine sands, 40% to 45% from crushed aggregate and the rest 5% to 15% from old fluvial deposits. The abundance of crushed coarse aggregates varies in the uniform distribution of country, but in general it can be concentrated in the most densely populated areas, five main cities. Typical rock types of the Korean crushed stones are classified as plutonic rocks of 27%, metamorphic rocks of 32%, sedimentary rocks and volcanic rocks of 18%, respectively. The most abundant coarse aggregate used in the country is obtained from granite (25% of total) and subordinately gneiss (20%), sandstone (10%) and andesite (10%). Although rock types using as dimension stone are only fifteen, those as aggregate amount up to twenty nine rocks. These rocks consist of plutonic rocks such as granite, syenite, diorite, aplite, porphyry, felsite. dike and volcanic rocks such as rhyolite, andesite, trachyte, basalt, tuff, volcanic breccia and metamorphic rocks such as gneiss, schist, phyllite, slate, meld-sandstone, quartzite, hornfels, calc-silicate rock, amphibolite. And sandstone, shale, mudstone, conglomerate, limestone, breccia, chert are main aggregate sources in tile sedimentary rocks. The abundance of plutonic rocks is the highest in Chungcheongbuk-do, and decreases as the order of Jeollabuk-do, Gangwon-do and Gyeonggi-do. In Jeollanam-do, volcanic aggregates occupy above 50%, on the contrary sedimentary aggregates are above 50% in Gyeongsangnam-do.

• Journal of Conservation Science
• /
• v.24
• /
• pp.23-36
• /
• 2008

The stone Buddhas and Shrine of Unjusa temple (Korea Treasure No. 797) in Hwasun formed in Koryo Dynasty are unique style which the Buddha faces each other the back parts of south and north within the stone Shrine. The stone Buddhas and Shrine are highly evaluated in historical, artistic and academic respects. But, the stone properties have been exposed in the open system various aspects of degradations weathered for a long time without specific protective facilities. The rock materials of the stone Buddhas and Shrine are about 47 blocks, and total press load is about 56.6 metric ton. The host rocks composed mainly of white grey hyaline lithic tuff and rhyolitic tuff breccia. In addition, biotite granite used as part during the restoration works. The chemical index of alteration for host tuffaceous rocks and the replacement granites range from 52.1 to 59.4 and 50.0 to 51.0, respectively. Weathering types for the stone Buddhas and Shrine were largely divided with physical, chemical and biological weathering to make a synthetic deterioration map according to aspects of damage, and estimate share as compared with surface area. Whole deterioration degrees are represented that physical weathering appeared exfoliation. Chemical weathering is black coloration and biological weathering of grey lichen, which show each lighly deterioration degrees. According to deterioration degree by direction of stone Buddhas and Shrine, physical weathering mostly appeared by 39.1% on the sorthern part, and chemical weathering is 61.2% high share on the western part. Biological weathering showed 38.3% the largest distribution on the southern part. Therefore, it is necessary to try hardening for the parts with serious cracks or exfoliations, remove secondary contaminants and organisms through regular cleaning. Also necessary to make a plan to remove moisture of the ground which causes weathering, and estimate that need established and scientific processing through clinical demonstration of conservation plan that chooses suitable treatment.

• Economic and Environmental Geology
• /
• v.52 no.5
• /
• pp.323-336
• /
• 2019

The Mesozoic activity on the Korean Peninsula is mainly represented by the Triassic post-collisional, Jurassic orogenic, and Cretaceous post-orogenic igneous activities. The diversity of mineralization by each geological period came from various geothermal systems derived from the geochemical characteristics of magma with different emplacement depth. The Cretaceous metallic mineralization has been carried out over a wide range of time periods from ca. 115 to 45 Ma (main stage; ca. 100 to 60 Ma) related to post-orogenic igneous activity, and spatial distribution patterns of most metal deposits are concentrated along small granitic stocks. The late Cretaceous metal deposits in the Gyeonggi and Yeongnam massifs are generally distributed along the boundary among the Gongju-Eumseong fault system and the Yeongdong-Gwangju fault system and the Gyeongsang Basin, most of them are in the form of a distal epithermal~mesothermal Au-Ag vein or a transitional mesothermal Zn-Pb-Cu vein. On the other hand, diverse metal commodities in the Taebaeg Basin, the Okcheon metamorphic belt and the Gyeongsang Basin are produced from various deposit types such as skarn, carbonate-replacement, vein, porphyry, breccia pipe, and Carlin type. In the late Cretaceous metallic mineralization, various mineral deposits and commodities were induced not only by the pathway of the hydrothermal solution, but also by the diversity of precipitation environment in the proximity difference of the granitic rocks. The diversity of these types of Cretaceous deposits is fundamentally dependent on the geochemical characteristics such as degree of differentiation and oxidation state of related igneous rocks, and ore-forming fluids generally exhibit the evolutionary characteristics of intermediate- to low-sulfur hydrothermal fluids.

• The Korean Journal of Petroleum Geology
• /
• v.14 no.1
• /
• pp.12-20
• /
• 2008

Oil sands in Canada are representative example of unconventional resources whose reserve estimates are as large as those in Saudi Arabia. Typical reservoir rocks of oil sands consist of channel-related deposits formed in a tide-dominated depositional setting. The tidal deposits are commonly characterized by spatially complicated and heterogeneous properties. Successful engineering methods to develop oil sands require in-depth understanding in the spatial distribution of reservoir properties. Geological model for oil sand reservoir characterization can be built on the basis of comparative studies of ancient and modem analogues. In particular, modern analogue studies become increasingly indispensable, since they provide better understanding in the reservoir-rock forming process and more importantly in the external mechanism responsible for the reservoir heterogeneity. Tide-dominated environment along the west coast of Korea is considered as one of the most excellent modem analogues of oil-sand forming depositional environment. Korean tidal environment provides insights on the origin of mud breccia, facies and stratigraphic architecture which are key issues to the characterization of oil sand reservoirs.