• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.7
• /
• pp.101-108
• /
• 2010

Domestic three-way catalyst satisfies exhaust gas conversion efficiency or pressure drop etc. but doesn't satisfy thermal durability. Thermal stress analysis for three-way catalyst was performed based on experimental temperature distribution. Thermal safety of three-way catalyst was estimated by safety factor. Aspect ratio variable had the most significant effect on thermal stress. Thickness variable had the least significant effect on thermal stress. Optimal conditions for premature failure prevention of three-way catalyst were as follows : (1) aspect ratio of three-way catalyst : 0.6:1 (2) 2.84mm thick (3) silicon nitride. The safety of Taguchi-optimized three-way catalyst were 4.7 times higher than that of existent three-way catalyst.

• Journal of Korean Society for Quality Management
• /
• v.33 no.1
• /
• pp.1-10
• /
• 2005

This paper develops a new VSI $\={X}-CRL$ synthetic control chart that considers convenience of use in the field, and perception of change of process applying VSI techniques to synthetic control chart, simultaneously. We found the optimal sampling interval and various control limit factor of the suggested chart using markov chain. Comparison and analysis is carried out between synthetic VSI $\={X}-CRL$ chart and other chart in the statistical aspect; $\={X}$ control chart, VSI $\={X}$ chart, another synthetic chart. In case that the process follows normal distribution, the proposed VSI $\={X}-CRL$ synthetic control chart in detecting process mean shift showed the best performance in aspect of statistical performance, regardless of control limit L of CRL/S control chart.

• Steel and Composite Structures
• /
• v.20 no.6
• /
• pp.1391-1409
• /
• 2016

Masonry infill has a significant effect on stiffness contribution, strength and ductility of masonry-infilled frames. These effects may cause damage of weak floor, torsional damage or short-column failure in structures. This article presents experiments of 1/2.5-scale steel reinforced recycled aggregates concrete (SRRC) frames. Three specimens, with different infill rates consisted of recycled concrete hollow bricks (RCB), were subjected to static cyclic loads. Test phenomena, hysteretic curves and stiffness degradation of the composite structure were analyzed. Furthermore, effects of axial load ratio, aspect ratio, infill thickness and steel ratio on the share of horizontal force supported by the frame and the infill were obtained in the numerical example.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.1406-1411
• /
• 2004

A series of experiments was conducted to examine characteristics of a grooved flat-strip heat pipe having multiple heat sources. The inner grooves of the heat pipe have the aspect ratio of 1 to $2.5(0.42{\times}1.05$ mm) whose pitch was 0.6 mm. Four block heaters ($10{\times}20$ mm) were placed in the evaporator section at intervals of 20 mm and six different heating modes were tested. The maximum surface heat flux of 80 $W/cm^2$ was achieved while the operating temperature was kept below $100^{\circ}C$, In the nearest heating mode (from the condenser location), the heat pipe exhibited more stable temperature distribution than the far heating mode where the heaters is located furthest from the condenser.

• Journal of Korean Association for Spatial Structures
• /
• v.24 no.1
• /
• pp.37-45
• /
• 2024

Steel plate shear walls (SPSWs) have been recognized as an effective seismic-force resisting systems due to their excellent strength and stiffness characteristics. The infill steel plate in a SPSW is constrained by a boundary frame consisting of vertical and horizontal structural members. The main purpose of this study was to investigate deformation modes and hysteretic characteristics of steel plate shear walls (SPSWs) to consider the effects of their aspect ratios and width-to-thicness ratios. The finite element model (FEM) was establish in order to simulate cyclic responses of SPSWs which have the two-side clamped boundary condition and made of conventional steel grade. The stress distribution obtained from the FEA results demonstrated that the principal stresses on steel plate with large thickness-to-width ratio were more uniformly distributed along its horizontal cross section due to the formation of multiple struts.

• Computers and Concrete
• /
• v.19 no.6
• /
• pp.677-687
• /
• 2017

The nonlinear buckling response of nano composite anti-symmetric functionally graded polymeric microplate reinforced by single-walled carbon nanotubes (SWCNTs) rested on orthotropic elastomeric foundation with temperature dependent properties is investigated. For the carbon-nanotube reinforced composite (CNTRC) microplate, a uniform distribution (UD) and four types of functionally graded (FG) distribution are considered. Based on orthotropic Mindlin plate theory, von Karman geometric nonlinearity and Hamilton's principle, the governing equations are derived. Generalized differential quadrature method (GDQM) is employed to calculate the non-linear buckling response of the plate. Effects of FG distribution type, elastomeric foundation, aspect ratio (thickness to width ratio), boundary condition, orientation of foundation orthotropy and temperature are considered. The results are validated. It is found that the critical buckling load without elastic medium is significantly lower than considering Winkler and Pasternak medium.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.31 no.4
• /
• pp.125-138
• /
• 2006

This paper considers a periodic review, two-echelon inventory system with one central warehouse and several re-tailers facing normally distributed demand. The goal is to attain target fill rates, while the systemwide total holding costs are minimized. An important aspect of this problem is material rationing in the case of shortages. If a central warehouse has insufficient inventory to deliver all replenishment orders to retailers, all order quantities are should be adjusted according to some rationing rule. A simple but efficient rationing rule is proposed and compared with the Balanced Stock (BS) rationing as introduced by Heijden which is known to be the best rationing policy in the literature. Numerical results show that the proposed rationing rule is more cost effective than BS rationing, especially for the differences in holding costs between retailers are large.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.3C
• /
• pp.220-225
• /
• 2002

Mobile IP aims to support mobility within the Internet. This paper concerned with the security aspect of Mobile IP. We show that current registration protocol has a possible replay attack despite the use of authenticated registration message and replay protection. We propose a public-key based registration protocol that also distributes a session-key distribution protocol in AAA. Proposed protocol provides authentication of mobile node and session-key distribution simultaneously. It also provides non-repudiation of service request.

• Proceedings of the KIEE Conference
• /
• 2001.05a
• /
• pp.316-318
• /
• 2001

Occasionally, equipment in a distribution system fails due to damage from weather, vandalism, or other causes. In addition, it is recommended practice to have some way in which maintenance or replacement of every element in a system can be performed without causing lengthy interruption of electrical service to the customers it feeds. Thus, alternate sources, paths, and configurations of service must be planned so that both failures and maintenance do not affect customer service beyond a reasonable amount. In some cases, planning for alternate routes of service during equipment outages or emergencies -- will be the major aspect influencing selection of a feeder's capacity, type of route, or layout. We want to know the relationship between molt-dividing multi-connection and distribution reliability for contingency support considerations.

• Proceedings of the KSME Conference
• /
• 2001.11b
• /
• pp.752-757
• /
• 2001

The characteristics of heat energy distribution on the fire-proof clay with microwave heating drying are numerically investigated using finite element method. The modelled regular hexahedron chamber$(50cm\times50cm\times50cm)$ filled with air consists of vertical heat source and sink walls, a fire-proof clay model, and adiabatic plates on the top and bottom walls. With different geometrical aspect ratios of the fire-proof clay model, the heat energy distribution is throughly investigated. The model gave a good prediction of the microwave heating characteristics of fire-proof clay. The optimal shape of the fire-proof clay for given chamber geometry and microwave power is analyzed.