Experimental and numerical studies on the frame-infill in-teraction in steel reinforced recycled concrete frames |
Xue, Jianyang
(College of Civil Engineering, Xi'an University of Architecture and Technology)
Huang, Xiaogang (College of Civil Engineering, Xi'an University of Architecture and Technology) Luo, Zheng (College of Civil Engineering, Xi'an University of Architecture and Technology) Gao, Liang (College of Civil Engineering, Xi'an University of Architecture and Technology) |
1 | Agrawal, R. and Hora, M.S. (2012), "Nonlinear interaction behaviour of infilled frame-isolated footings-soil system subjected to seismic loading", Struct. Eng. Mech., Int. J., 44(1), 85-107. DOI |
2 | Asteris, P.G., Antoniou, S.T. and Sophianopoulos, D.S. (2011), "Mathematical macromodeling of infilled frames: State of the art", J. Struct. Eng., 137(12), 1508-1517. DOI |
3 | Cavaleri, L. and Di Trapani, F. (2014), "Cyclic response of masonry infilled RC frames: Experimental results and simplified modeling", Soil Dyn. Earth. Eng., 65(7), 224-242. DOI |
4 | Dolsek, M. and Fajfar, P. (2008), "The effect of masonry infills on the seismic response of a four-storey reinforced concrete frame-a deterministic assessment", Eng. Struct., 30(7), 1991-2001. DOI |
5 | El-Dakhakhni, W.W., Elgaaly, M. and Hamid, A.A. (2003), "Three-strut model for concrete masonryinfilled steel frames", J. Struct. Eng., 129(2), 177-185. DOI |
6 | Etxeberria, M., Vazquez, E. and Mari, A. (2007), "Influence of amount of recycled coarse aggregates and production process on properties of recycled aggregate concrete", Cem. Concr. Res., 37(5), 735-742. DOI |
7 | Gomes, M. and de Brito, J. (2009), "Structural concrete with incorporation of coarse recycled concrete and ceramic aggregates: Durability performance", Mater. Struct., 42(5), 663-675. DOI |
8 | Hashemi, S.A. (2007), "Seismic evaluation of reinforced concrete building including effects of masonry infill walls", Ph.D. Dissertation; University of California, Berkeley, CA, USA. |
9 | Koutromanos, I., Stavridis, A. and Shing, P.B. (2011), "Numerical modeling of masonry-infilled RC frames subjected to seismic loads", Com. Struct., 89(11), 1026-1037. DOI |
10 | Liu, Z.Q., Xue, J.Y. and Ma, H. (2015), "Testing and numerical simulation of the normal cross-section bearing capacity of steel reinforced recycled concrete columns", Eng. Mech., 32(1), 81-87. |
11 | Lubliner, J. (2006), Plasticity Theory, Pearson Education, Upper Saddle River, NJ, USA. |
12 | Ma, H., Xue, J.Y. and Zhang, X.C. (2013), "Seismic performance of steel-reinforced recycled concrete columns under low cyclic loads", Constr. Build. Mater., 48, 229-237. DOI |
13 | Mander, J.B., Priestley, M.J.N. and Park, R. (1988), "Theoretical stress-strain model for confined concrete", J. Struct. Eng., 114(8), 1804-1826. DOI |
14 | Otsuki, N., Miyazato, S. and Yodsudjai, W. (2003), "Influence of recycled aggregate on interfacial transition zone, strength, chloride penetration and carbonation of concrete", J. Mater. Civil Eng., 15(5), 443-451. DOI |
15 | Poon, C.S., Kou, S.C. and Lam, L. (2002), "Use of recycled aggregates in molded concrete bricks and blocks", Constr. Build. Mater., 16(5), 281-289. DOI |
16 | Pujol, S. and Fick, D. (2010), "The test of a full-scale three-story RC structure with masonry infill walls", Eng. Struct., 32(10), 3112-3121. DOI |
17 | Smyrou, E., Blandon, C. and Antoniou, S. (2011), "Implementation and verification of a masonry panel model for nonlinear dynamic analysis of infilled RC frames", Bull. Earthq. Eng., 9(6), 1519-1534. DOI |
18 | Xue, J.Y., Bao, Y.Z. and Ren, R. (2014), "Experimental study on seismic performance of steel reinforced recycled concrete inner-frame joints under low-cyclic reversed loading", China Civ. Eng. J., 47(10), 1-8. |
19 | Tasnimi, A.A. and Mohebkhah, A. (2011), "Investigation on the behavior of brick-infilled steel frames with openings, experimental and analytical approaches", Eng. Struct., 33(3), 968-980. DOI |
20 | Xiao, J.Z. (2008), Recycled Concrete, Architecture and Building Press, Beijing, China. |