• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2015년도 추계학술대회
• /
• pp.607-610
• /
• 2015

농산물 유통은 농산물이 생산자인 농민으로부터 최종 소비자의 손에 이르기까지의 모든 경제 활동을 의미한다. 일반적으로 국내 농산물은 유통경로가 복잡하고 유통과정에 참여하는 유통주체가 많아 유통비용이 많이 소요되고 유통마진율이 상대적으로 높은 것이 특징이다. 따라서 유통경로 상에 참여하는 구성원들이 상호 정확하고 원활한 정보교환과 공유체계를 바탕으로 정보를 통합 관리할 수 있는 통합유통정보시스템일 필요하다. 따라서 본 논문에서는 통합유통정보시스템을 구현하기 위한 유통정보 데이터베이스 및 유통단계별 시스템 간의 정보 공유와 활용을 위한 자료 구조에 대한 표준화 방안을 제시하고자 한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 추계학술대회 논문집 전력기술부문
• /
• pp.344-346
• /
• 2005

The recovery time of developing SFCL(Superconducting Fault Current Limiter) has an uncertainty. In general, the recovery time is estimated at 1 sec and more, even though the progress of SFCL technology is considered. However, auto reclosing time of circuit breaker is 0.5 sec in Korean distribution power system. It is impossible to apply only one SFCL to power system because the recovery time is over the reclosing time of protection system. This study proposes a new SFCL system for distribution power system application. The proposed systems consider auto reclosing action for the protection in practical power system and consist of tow parallel SFCLs.

• 대한수학회지
• /
• 제32권2호
• /
• pp.211-236
• /
• 1995

The purpose of this paper is to provide a transient diffusion approximation of queue size distribution for M/G/m/N system. The M/G/m/N system can be expressed as follows. The interarrival times of customers are exponential and the service times of customers have general distribution. The system can hold at most a total of N customers (including the customers in service) and any further arriving customers will be refused entry to the system and will depart immediately without service. The queueing system with finite capacity is more practical model than queueing system with infinite capacity. For example, in the design of a computer system one of the important problems is how much capacity is required for a buffer memory. It its capacity is too little, then overflow of customers (jobs) occurs frequently in heavy traffic and the performance of system deteriorates rapidly. On the other hand, if its capacity is too large, then most buffer memories remain unused.

• KEPCO Journal on Electric Power and Energy
• /
• 제2권2호
• /
• pp.269-272
• /
• 2016

Distribution management system or microgrid energy management system plays an important role in monitoring, operation and control of electrical distribution systems by utilizing IT infrastructure. Nowadays, the rapid increase of the distributed resources makes the conventional management system have some additional functionality for the reliable operation due to intermittent renewables and the efficient operation on the economical purpose. In this paper, the brief standard software functional requirements of microgrid energy management system are provided through survey of the recent commercial products of the major vendors, and furthermore the architectures of microgrid energy management system are provided in comparison with major suppliers' microgrid energy management system. The summary of investigation will be able to make the developers and researchers focus on the specific functionality in the real world.

• Journal of Information Technology Applications and Management
• /
• 제12권3호
• /
• pp.1-25
• /
• 2005

Recently genuine products and good commerce have been threatened by distributing forgery in home and abroad markets. It is because most customers cannot distinguish whether genuine or forgery, so establishing of strict distribution system is needed. Therefore recently Genuine Guarantee System which can confirm genuine products has been developed using the Internet. The object of this system is protecting to purchase forgery by confirming distribution system. This system can provide a reliable environment of consumption. But to be diffused at distribution structure and applied, We require the understanding about not only technical side but behavior side. That is, we need to research the cause and process of using this new information system. in this research, we understand the cause of affection on the system's acceptance and define the suitability about the model according to Technology Acceptance Model by Davis. The above can build the suitable operating strategy and understand the criterion as a new business model.

• 한국전기전자재료학회논문지
• /
• 제28권9호
• /
• pp.602-606
• /
• 2015

This paper presents a ZigBee wireless communication system for remote diagnosis in overhead distribution power lines. The system is divided in three parts in the functional aspect - a host computer module, a remote controller module and a diagnostic system module. The host computer module designed as USB interface transmits control signals and receive data measured by sensor. The remote controller module operates the diagnostic system. Diagnostic system module communicates with internal main controller and host computer USB. Multiple communication channel is adopted for simultaneous operations of several diagnostic system. Dedicated protocol for each module is developed. The system is designed with a focus on low cost and small size suitable for lightweight and small diagnostic system.

• 대한기계학회논문집
• /
• 제10권3호
• /
• pp.326-334
• /
• 1986

The effects of flow interaction between adjacent sprays in twin-spray system on the spatial distribution of injected liquid (water) and drop size distribution in condensable (steam) environment were carefully observed through experiments. The spatial distribution of injected liquid in twin-spray system appears to be more uniform than the simple superposition of the spatial distributions of liquid obtained from each individual spray. Drop size distribution was obtained by using the immersion sampling technique. It was found that, in the twin-spray, the larger numbers of small drops are collected throughout the spraying region due to the increase of entrainment velocity of ambient steam compared with the case of simple superposition of each individual spray. Moreover, in the overlapped portion of the twin-spray, the drop size distribution was changed also due to the collision between large drops. As a result, the behavior of twin-spray system (and eventually multiple-spray system) can not be predicted precisely by simple superposition of the behaviors of each constituting spray. Hence, for the design of multiple spray system, the effect of flow interaction between sprays should be taken into account seriously.

• 전기학회논문지
• /
• 제59권12호
• /
• pp.2135-2142
• /
• 2010

This paper studies the validity about a joint operation of neutral wire and overhead grounding wire in combined distribution systems. The overhead grounding wire and neutral wire are currently installed separately and grounded by common. However there is no any ineffectiveness or electrical problem in case of the proposed system, such system can be operated at real distribution system. Therefore this paper describes the suitability of a joint operation through lightning surge analysis on combined distribution systems. Lightning surge analysis is carried out by EMTP/ATPDraw to obtain the overvoltage of overhead line and underground cable in various conditions such as locations and current types of lightning stroke. Overvoltage gained by the analysis show that the insulation strength of the joint operation case is not stable compare with the current operation case.

• 조명전기설비학회논문지
• /
• 제18권1호
• /
• pp.98-104
• /
• 2004

본 논문에서는 사고나 계획정전 등으로 인한 건전 정전구간에 신속하게 전원을 공급하는 방안을 제시하였다. 제시한 부하복구방안은 연계개폐기로부터 공급피더 방향으로 계통을 역방향으로 탐색하고 탐색시 저장된 경로와의 조합을 이용하여 구해짐으로써 계통의 탐색공간이 대폭 줄어들게 되어 신속한 복구방안의 제시가 가능하다. 또한 공급 여유량을 미리 확보하는 2단계의 부하복구, 모든 구간에 대한 복구가 불가능한 경우 부하를 차단하는 방안 등이 포함되어 있으므로 광역정전이나 다중사고 및 중요수용가를 고려한 부하복구, 배전자동화시스템과 연계된 부하 복구에도 이용할 수 있다.

• Journal of Power Electronics
• /
• 제18권5호
• /
• pp.1479-1488
• /
• 2018

Power packet (PP) distribution system distributes power to different loads that share the same distribution cable in a packetized form. When compared with conventional power systems, a PP distribution system (PPDS) can reduce standby power, eliminate Point-of-Load (PoL) power conversion, and intelligently control the load demand from the source side. Due to the absence of PoL conversion, when multiple power sources at different voltage levels and conditioning requirements jointly send power to various loads at different voltage ratings, the generated voltage has an irregular shape. A large filter at each of the load sides is required to reduce such a large voltage ripple. In this paper, a single-inductor, multiple-input-single-output converter structure based multiple-energy-source mixer is proposed. It combines PP generation, maximum power point tracking (MPPT) of renewable energy sources (RESs) and filtering at the source side. To demonstrate the possible renewable energy integration, a PV panel is used as a power source together with other constant voltage sources. The PV power is approximately tracked using the constant voltage method and it is used for each of the PP generations. The proposed PP distribution system is experimentally verified and it is shown that a conventional PI controller is sufficient for stable system operation.