• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 추계학술대회 논문집
• /
• pp.736-741
• /
• 2005

This paper presents electric characteristics analysis and safe configuration for extension power supply between existent 6.6kV ungrounded distribution system and establishment and improvement 22.9kV direct grounding distribution system. For this, we model 6.6kV ungrounded and 22.9kV direct grounding distribution system of urban underground, ground region. and rural electrical, unelectrical region using PSCAD/EMTDC and analyze voltage drop, charging current, ground and short fault through simulation. To analyze electric characteristics of extension power supply, we simulate extension power supply of overhead line of 6.6kV ungrounded system and underground line of 22.9kV direct grounding system of rural electrical region and propose operation condition for safe extension power supply through result of analysis. Characteristics of voltage drop, charging current, ground and short fault appear almost similarly with electrical characteristic of direct power supply. However, because unbalance of phases may cause relay's malfunction of ungrounded system and ground fault current of direct grounding system may demage facilities of ungrounded system, we propose safe system configuration such as impedance grounding system of neutral point.

• 에너지공학
• /
• 제18권3호
• /
• pp.147-155
• /
• 2009

신 재생에너지를 비롯하여 분산전원의 사용이 매년 증가하고 있다. 분산전원의 그 특성에 의해 배전계통 및 수용가에 근접하여 위치하며 단독운전 또는 배전계통 망에 연계하여 운영될 수 있다. 만약 분산전원이 배전계통에 연계되어 운영될 경우 현재의 배전계통 운영방식과는 다르기 때문에 효율적인 분산전원의 관리 및 안정적인 배전계통을 운영하기 위해서는 분산전원의 연계에 대한 기준 및 새로운 계통운영지침 등이 재정립되어야 할 것이다. 본 논문에서는 향후 분산전원이 배전계통에 연계되어 운전될 때 분산전원의 상태를 감시 및 제어 또는 관리하기 위해서 국제 표준 프로토콜인 IEC-60870으로 분산전원 연계용 FEP(Front-End Processor, FEP)을 설계하였다. 설계한 사항을 검증하기 위하여 분산전원 상위 시스템인 주장치와 하위 시스템인 분산전원 연계용 RTU(Remote Terminal Unit, RTU)를 가지고 시험을 실시하였다. 그 결과 정상적인 데이터를 상위 시스템에서 확인을 통하여 입증하였다.

• 한국입자에어로졸학회지
• /
• 제9권3호
• /
• pp.133-137
• /
• 2013

Measuring particle size distribution is one of the primary concerns in aerosol studies. For a nano-particle size distribution measurement, many scientists use a combination of a differential mobility analyzer (DMA) and a condensation particle counter (CPC) system, which is a called scanning mobility particle sizer (SMPS). Although it has a very high particle size resolution, some issues still remain. These problems include residence time between a DMA and a CPC, discontinuity of a CPC, and disturbance due to long scanning time during the precise measurement of particles. In particular, long scanning time is not adequate for measuring particle size distribution since the particle concentration is changing during the measurement. In this study, we developed radial exhaust multi-port system (REM-system) with no scanning time and high resolution to measure real-time particle size distribution. As a result of the REM-system performed using mono-disperse particle, it is expected that this system will be suitable for measuring continuously changing aerosol. If the counting efficiency of multi-condensation particle counter (M-CPC) and data inversion matrix are completed, REM-system will be a very adequate system for unsteady aerosol, which changes for SMPS scanning time.

• 한국산학기술학회논문지
• /
• 제22권3호
• /
• pp.1-12
• /
• 2021

MVDC 배전기술은 현재 급격하게 도입되고 있는 태양광전원의 접속지연 문제를 해결하기 위한 효과적인 대안으로 평가되고 있지만, DC 배전망용 기기들을 개발해야 하므로 DC 배전망의 구축비용은 경제적인 측면에서의 문제점을 가지고 있다. 따라서, 본 논문에서는 태양광전원의 수용을 위한 MVDC 배전망의 도입 타당성을 평가하기 위하여, 태양광전원 단지를 용량에 따라 규모별로 정의하고, 이를 수용하기 위한 배전망을 건설하는 경우에 대하여 규모별로 수용성 모델을 제시한다. 이 모델은 배전망의 전원공급방식에 따라 AC 및 DC 배전망으로 구분되며, 수용할 태양광전원 단지의 용량에 따라 수백 MW급은 대규모, 수십 MW급은 중규모, 수 MW급은 소규모로 정의된다. 또한, 본 논문에서는 AC 및 DC 배전망의 건설비, 전력변환설비의 교체비, 운용비로 구성된 비용요소와 태양광전원의 발전수익에 따른 전력량 요금 및 REC 요금으로 구성된 편익요소를 고려하여 MVDC 배전망의 경제성평가 모델링을 제시한다. 이를 바탕으로 현재가치 환산법과 원금균등상환 방식을 이용하여 MVDC 배전망의 경제성을 평가한 결과, 태양광전원의 수용 규모에 따라 일정 연계거리 이후에서는 DC 배전망의 구축비용이 기존의 AC 배전망보다 경제적임을 알 수 있어, 본 논문에서 제시한 경제성평가 모델링의 유용성을 확인하였다.

• 한국의류산업학회지
• /
• 제11권4호
• /
• pp.602-613
• /
• 2009

This study aims to improve the fit of middle and high school girls' uniforms. This study researched on the sizing system reflecting their body figures. The results are as follows. First, to classify the middle and high school girls' figures, factor analysis, and cluster analysis were conducted. 4 factors were extracted for upper body of the middle school girls, and 5 factors were extracted for the highschool girls. For the lower body, 3 factors were extracted for both the middle and high school girls. The middle school girls were then divided into 4 groups for the upper body and 4 groups for the lower body. The high school girls were divided into 4 upper and lower body groups. Third, KS size intervals were used for frequency distribution of height and bust for the bodice, height and waist for the lower body. Sizing system of the uniform company and the frequency distribution of sizes were compared. As a result, sizing system of the uniform company and the frequency distribution overlapped very little. Fourth, sizing system considering body type distribution and high frequency distribution of sizes was suggested. As a result when 6 sizes were suggested 30% of the population was covered, and when 11 sizes were suggested 55% of the population was covered.

• 전기학회논문지
• /
• 제65권11호
• /
• pp.1800-1805
• /
• 2016

The micro-grid designed as bipolar ${\pm}750V$ low-voltage DC power distribution system demonstrated by KEPRI, demands interconnection of a number of small decentralized power source including variable renewable generator. Therefore, variable researches for the influence of interconnection with the bipolar typed DC grid and these variable power sources are required for superior quality of power distribution. Renewable power generation simulators for the bipolar ${\pm}750V$ low-voltage DC power distribution system are necessary for such researches. In this paper, we carry out a research on the photovoltaic simulator that be actually able to interconnect with a bipolar ${\pm}750V$ low-voltage micro-grid. Simulator for this research is not only able to simulate photovoltaic generation according to weather informations and PV modules characteristics, but also contribute to stabilization of bipolar ${\pm}750V$ low-voltage of the system. Therefore, the simulator was designed to develop a system that can situationally respond to variable control algorithms such as the MPPT control, droop control, EMS power control, etc.

• 한국초전도ㆍ저온공학회논문지
• /
• 제7권1호
• /
• pp.37-41
• /
• 2005

This paper describes the construction scheme of new distribution system using HTS(High Temperature Superconducting) power equipments such as cable, transformer and FCL(fault current limiter). At present, one of the most serious problems in distribution power system, especially for metropolitan complex city, is to obtain the ROW for cable line routes, space for downtown substations and satisfy the environmental protection caused by NIMBY phenomena. Unfortunately, it is expected that this situation will get more and more worse. As the HTS technology to apply in power system Is developed, HTS cable utilizing mass-capacity characteristic can be a useful countermeasure to overcome this problem. This paper describes the application methodology of 22.9kV HTS cable with low-voltage, mass-capacity characteristics replacing the 154kV conventional cable. By applying 22.9kV HTS cable, the HTS transformer with higher capacity for the reduction of space and transformer numbers of downtown substation is necessary. Also, if the leakage Impedance of HTS transformer is same as or lower than that of conventional transformer, the fault current of 22.9kV bus will increase because the HTS transformer capacity is larger than that of the conventional transformer. This means the parallel application of HTS-FCL to reduce the fault current in addition to the HTS cable and transformer can be necessary. With the basic construction scheme of new distribution system, this paper describes the future study points to realize this new distribution system using HTS equipments.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 C
• /
• pp.1192-1194
• /
• 1999

Recently, there has been growing interest in utilizing cogeneration(COGN) system which has high energy efficiency due to the lacking of energy resource, but insertion of cogeneration system into existing power distribution system can cause several problems such as voltage variations, reenergizing of feeder isolated by fault, increasing fault current because of reverse power of COGN. Also these problems increase the complexity of control, protection, and maintenance of power distribution systems. Hence, some problems according to COGN interconnection operation to power distribution system must be taken into account so that operation and security of power distribution system is not disturbed. This paper deals with momentary voltage variations and fault analysis caused by interconnection operation of COGN.

• 한국중재학회지:중재연구
• /
• 제30권1호
• /
• pp.199-215
• /
• 2020

Compared to Korea's recently expanding art distribution market, the difficulty of securing the authenticity of art is hindering the healthy development and growth of the market. In this regard, the current situation of the emotional system in the UK and France's art distribution process are examined as excellent cases in foreign countries. In the UK, there is a full autonomous appraisal system by art experts without state intervention. In France, the judiciary and the administration of art have an appraisal system for art works, so the appraisal work has reliability and objectivity. Through the above system, this study suggests measures to strengthen transparency in art trade and to break unfair practices in order to secure the authenticity of the domestic art distribution market. In addition, this study proposes the establishment of a professional appraisal system and the improvement of administrative law regulations to explore the possibility of ensuring fairness through mediation through the example of an international arbitration body.

• 한국의류산업학회지
• /
• 제11권3호
• /
• pp.445-452
• /
• 2009

This study aims to improve the fit of high school girls' uniforms. This study researched on the fit of the recent high school girls' uniforms and developed a sizing system that adequately reflects their body figures. The results are as follows. First, the research showed that over 50% of the highschool girls wore their blouses too tight, whereas over 60% of the girls wore skirts that were appropriately fitted. Second, to classify the high school girls' figures, factor analysis and cluster analysis were conducted. 5 factors were extracted for upper body and 3 factors for the lower body. The girls were then divided into 3 groups for the upper body and 4 groups for the lower body. Third, KS size intervals were used for frequency distribution of height and bust for the bodice, height and waist for the lower body. Sizing system of the uniform company and the frequency distribution of sizes were compared. As a result, sizing system of the uniform company and the frequency distribution slightly overlapped. Fourth, sizing system considering body type distribution and high frequency distribution section of sizes was suggested. As a result, for the upper body, when 6 sizes were suggested, 43.9% of the population was covered and when 11 sizes were suggested, 58.3% was covered. For the lower body, when 6 sizes were suggested, 32.2% was covered, and when 11 sizes were suggested 58.9% of the population was covered.