• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.1
• /
• pp.33-43
• /
• 2013

This paper proposes a distributed MAC protocol called Carrier Sensing Multiple Access with Collision Resolution (CSMA/CR) considering fully-connected single hop network environments for next-generation wireless LAN with high density of stations. The proposed CSMA/CR is compatible with the conventional MAC protocols by observing the operation of CSMA/CA and is able to detect a collision promptly without RTS/CTS exchange by applying the technique of CSMA/CD to wireless environments. Moreover, once a collision is detected, the dedicated resource is allocated to the next transmission and so the collision that may occur again is resolved. We investigate some implementation issues for the practicality of CSMA/CR and compare it with the typical distributed MAC protocols. The simulation results show that the proposed CSMA/CR has a low overhead as detecting a collision without the RTS/CTS exploitation and achieves always the best throughput regardless of the number of access stations, by using the reservation-based collision resolution technique.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.9A
• /
• pp.853-866
• /
• 2008

In this paper, a multi-hop relaying transmission scheme is analyzed regarding its feasibility and potentiality in the IEEE 802.22-based cognitive radio (CR) environment. Shortly, basic design issues are addressed such as relay station (RS) deployment and a frame structure of physical channel to escape inter-hop interference. This paper mainly develops a radio resource management scheme based on spectrum sensing results aggregated from CR secondary nodes and improves the opportunistic spectrum sharing efficiency. In particular, a decision rule about a channel availability is made using a distributed sensing method. Subsequently, spectrum allocation and routing path decision procedures are proposed to establish a link from source to destination with a hop-by-hop manner. Simulation results show that the proposed multi-hop relaying scheme is substantially profitable in CR environments if the number of hops and RS deployment are designed in such a way that the spectrum sharing gain is larger than spectrum division loss which is inherently induced in multi-hop relaying systems.

• Journal of Digital Contents Society
• /
• v.14 no.4
• /
• pp.429-437
• /
• 2013

Recently, wireless mesh network has been focused as a core technology for resolving the issues of shadow zone and distributed bypass route as it has broad service coverage as well as good scalability features. It, however, provides users with relatively lower QoS than infrastructure-based networks. In order for addressing this QoS issue and also enhancing the routing performance of mobile WiMax mesh network, this paper proposes a load sensing QoS routing (LSQR) scheme. In the proposed LSQR, each node figures out network congestion status and selects a bypass route accordingly. With this scheme, we can expect good load balancing effect by changing the routing paths from centralized links to distributed links under a heavy traffic condition. From the simulation results using NS-2, it has been verified that the LSQR shows lower packet loss rates and data transmission delays than the existing representative routing schemes.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.05a
• /
• pp.856-858
• /
• 2013

The data which is sensed on USN(Ubiquitous Sensor Network) environment is concerned with personal privacy and the secret information of business, but it has more vulnerable characteristics, in contrast to common networks. In other words, USN has the vulnerabilities which is easily exposed to the attacks such as the eavesdropping of sensor information, the distribution of abnormal packets, the reuse of message, an forgery attack, and denial of service attacks. Therefore, the key is necessarily required for secure communication between sensor nodes. This paper proposes a KDPC(Key Distribution Protocol based on Cluster) using ECDH algorithm by considering the characteristics of sensor network. As a result, the KDPC can provide the safe USN environment by detecting the forgery data and preventing the exposure of sensing data.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.12
• /
• pp.2633-2640
• /
• 2009

We design a small-area, low-power, and high-speed EEPROM for touch screen controller IC. As a small-area EEPROM design, a SSTC (side-wall selective transistor) cell is proposed, and high-voltage switching circuits repeated in the EEPROM core circuit are optimized. A digital data-bus sensing amplifier circuit is proposed as a low-power technology. For high speed, the distributed data-bus scheme is applied, and the driving voltage for both the EEPROM cell and the high-voltage switching circuits uses VDDP (=3.3V) which is higher than the logic voltage, VDD (=1.8V), using a dual power supply. The layout size of the designed 128-KBit EEPROMIP is $662.31{\mu}m{\times}1314.89{\mu}m$.

• Smart Structures and Systems
• /
• v.3 no.2
• /
• pp.147-172
• /
• 2007

The present paper is concerned with the design of distributed sensors and actuators. Strain type sensors and actuators are considered with their intensity continuously distributed throughout a continuous structure. The sensors measure a weighted average of the strain tensor. As a starting point for their design we introduce the concept of collocated sensors and actuators as well as the so-called natural output. Then we utilize the principle of virtual work for an auxiliary quasi-static problem to assign a mechanical interpretation to the natural output of the sensors to be designed. Therefore, we take the virtual displacements in the principle of virtual work as that part of the displacement in the original problem, which characterizes the deviation from a desired one. We introduce different kinds of distributed sensors, each of them with a mechanical interpretation other than a weighted average of the strain tensor. Additionally, we assign a mechanical interpretation to the collocated actuators as well; for that purpose we use an extended body force analogy. The sensors and actuators are applied to solve the displacement tracking problem for continuous structures; i.e., the problem of enforcing a desired displacement field. We discuss feed forward and feed back control. In the case of feed back control we show that a PD controller can stabilize the continuous system. Finally, a numerical example is presented. A desired deflection of a clamped-clamped beam is tracked by means of feed forward control, feed back control and a combination of the two.

• Korean Journal of Remote Sensing
• /
• v.31 no.3
• /
• pp.245-253
• /
• 2015

According to wide civilian utilization of multi sensor satellite information, practical needs for fusion processing and interoperable operation with multiple remote sensing imageries within distributed remote server are being increased. For this task, OGC standards with respect to satellite images and its derived products are crucial factors. This study is to present an applicability of WPS through testing implementation of image processing algorithm. Open sources such as Geoserver and OTB were used linked to WPS application for implementation. WPS can be solely used for web service supporting geoprocessing algorithm, but technical consideration compromising with other important standard protocols including WMS, WFS, WCS, or WMTS is necessary to build full featured geo web for remote sensing imageries. It is expected that application of these international standards for geo-spatial information is an important approach to produce value-added results by interoperable processing between interorganizations or information dissemination containing practical satellite image processing functionalities.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.2 no.2
• /
• pp.9-14
• /
• 1999

This paper describes an algorithm for the correction of major radiometric errors shown in MEIS (Multi-spectral Earth Imaging System) images on board KITSAT-3. MEIS images contain various radiometric errors as also shown in the images obtained from other remote sensing sensors. This paper introduces the two major radiometric error sources shown in MEIS images and the corresponding correction algorithm. The proposed algorithm was integrated to an operational preprocessing software and validated by applying the algorithm to several tens of MEIS images. This algorithm will therefore applied operationally to raw MEIS images before they are distributed to users.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.6
• /
• pp.1632-1636
• /
• 2013

$Ga_2O_3$ one-dimensional (1D) nanostructures were synthesized by using a thermal evaporation technique. The morphology, crystal structure, and sensing properties of the $Ga_2O_3$ nanostructures functionalized with Pt to $NO_2$ gas at room temperature under UV irradiation were examined. The diameters of the 1D nanostructures ranged from a few tens to a few hundreds of nanometers and the lengths ranged up to a few hundreds of micrometers. Pt nanoparticles with diameters of a few tens of nanometers were distributed around a $Ga_2O_3$ nanorod. The responses of the nanorods gas sensors fabricated from multiple networked $Ga_2O_3$ nanorods were improved 3-4 fold at $NO_2$ concentrations ranging from 1 to 5 ppm by Pt functionalization. The Pt-functionalized $Ga_2O_3$ nanorod gas sensors showed a remarkably enhanced response at room temperature under ultraviolet (UV) light illumination. In addition, the mechanisms via which the gas sensing properties of $Ga_2O_3$ nanorods are enhanced by Pt functionalization and UV irradiation are discussed.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.7 no.2
• /
• pp.366-385
• /
• 2013

In this paper, we propose a compressed sensing (CS) based Wyner-Ziv (WZ) codec using motion-aligned auto regressive model (MAAR) based side information (SI) extrapolation to improve the compression performance of low-delay distributed video coding (DVC). In the CS based WZ codec, the WZ frame is divided into small blocks and CS measurements of each block are acquired at the encoder, and a specific CS reconstruction algorithm is proposed to correct errors in the SI using CS measurements at the decoder. In order to generate high quality SI, a MAAR model is introduced to improve the inaccurate motion field in auto regressive (AR) model, and the Tikhonov regularization on MAAR coefficients and overlapped block based interpolation are performed to reduce block effects and errors from over-fitting. Simulation experiments show that our proposed CS based WZ codec associated with MAAR based SI generation achieves better results compared to other SI extrapolation methods.