• Applied Chemistry for Engineering
• /
• v.34 no.3
• /
• pp.226-240
• /
• 2023

This paper provides an overview of the trends and future directions in the development of anode materials for solid oxide fuel cells (SOFCs) using hydrocarbons as fuel, with the aim of enabling a decentralized energy supply. Hydrocarbons (such as natural gas and biogas) offer promising alternatives to traditional energy sources, as their use in SOFCs can help meet the growing demands for energy. We cover several types of materials, including perovskite structures, high-entropy alloys, proton-conducting ceramic materials, anode on-cell catalyst reforming layers, and anode functional layers. In addition, we review the performance and long-term stability of cells based on these anode materials and assess their potential for commercial manufacturing processes. Finally, we present a model for enhancing the applicability of fuel cell-based power generation systems to assist in the realization of the H₂ economy as the best practice for enabling distributed energy. Overall, this study highlights the potential of SOFCs to make significant progress toward a sustainable and efficient energy future.

• International journal of advanced smart convergence
• /
• v.12 no.2
• /
• pp.173-181
• /
• 2023

Data collection is an essential element in the construction and operation of a smart factory. The quality of data collection is greatly influenced by network conditions, and existing wireless network systems for IoT inevitably lose data due to wireless signal strength. This data loss has contributed to increased system instability due to misinformation based on incorrect data. In this study, I designed a distributed MQTT IoT smart sensor and gateway structure that supports wireless multicasting for smooth sensor data collection. Through this, it was possible to derive significant results in the service latency and data loss rate of packets even in a wireless environment, unlike the MQTT QoS-based system. Therefore, through this study, it will be possible to implement a data collection management system optimized for the domestic smart factory manufacturing environment that can prevent data loss and delay due to abnormal data generation and minimize the input of management personnel.

• Journal of KIISE:Computer Systems and Theory
• /
• v.33 no.1_2
• /
• pp.44-51
• /
• 2006

In this paper, we present a network-based integrated nesting system, that is adapted a current engineering concept. Generally, sheet cutting processes proceed in turn following an existing order In this study, however, the special characteristics of these processes were analyzed and the processes were redesigned with distributed design so that they could be operated in a client/server environment. Also, the necessary sheet material cutting processes, part CAD, nesting, part CAM, and NC post-processor capabilities, were implemented so that many workers could handle them all on the Web. Compared to existing commonly used systems, the developed system can provide integrated work environment for cutting automation, allow job collaboration between workers, and it has proved that it can shorten the standby time for work. By grafting computer system technologies to sheet material cutting automation field, this research expects to contribute to the enhancement of factory automation efficiency and productivity.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.11 no.4
• /
• pp.19-25
• /
• 2002

As computer-related technologies have been developed, legacy design systems have not been appropriate far new computing environment. It is necessary that most of them are either modified or newly developed. However, these activities require quite much amount of cost and time. This paper presents a method of extending legacy design systems to the internet without any modification using XML and XSLT. We have been extended legacy systems in the two viewpoints. First, an XML document has been defined to present the input information of a legacy system which is executed on the consol environment - MS DOS, for example. Also, an XSLT document has been generated to transform an XML document to the input document of the legacy system An XML document is transformed to the input document by XSLT processor according to the transformation rules defined in the XSLT document. This technique to generate input documents is independent to the platform type and facilitates to link legacy systems to other systems. Second, a legacy system controller has been made to control a legacy system and developed a web service to extend it and its controller. The legacy system controller operates it automatically. The web service provides its functions to other systems via internet. We have applied the developed methodologies to the legacy gear design system 조ich calculates AGMA gear rating md made AGMA gem rating web service.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1999.10a
• /
• pp.411-416
• /
• 1999

The measurement of unsteady flow rate is of vital importance to clarify and improve the dynamic characteristics in pipeline, hydraulic components and system. There is also demand for a real time flow sensor of ability to measure unsteady flow rate with high accuracy and fast response to realize feedback control of flow rate in fluid power systems. In this paper, we propose an approach for estimating unsteady flow rate through a pipeline and components under high pressure condition. In the method, unsteady flow rate is estimated by using hydraulic pipeline dynamics and the measured pressure values at two distant points along the pipeline. The distributed parameter model of hydraulic pipeline is applied with consideration of frequency dependent viscosity friction and unsteady velocity distribution at a cross section of a pipeline. By using the self-checking functions of the method, the validity is investigated by comparison with the measured and estimated pressure waveforms at the halfway section on the pipeline. The results show good agreement between the estimated flow rate waveforms and theroetical those under unsteady laminar flow conditions. the method proposed here is useful in estimating unsteady flow rate through an arbitray cross section in hydraulic pipeline and components without installing an instantaneous flowmeter.

• International Journal of Precision Engineering and Manufacturing-Green Technology
• /
• v.5 no.5
• /
• pp.623-630
• /
• 2018

The renewable energy systems have been in the spotlight as an alternative for environmental issues. Therefore, the governmental policies are being implemented to spread of promote power generation system using renewable energy in various countries around the world. In addition, Korea has also developed a policy called the power trading contract which can profit from electricity produced from renewable power generation system through Korea Electric Power Corporation (KEPCO) and Korea Power Exchange (KPX). As a result, the power trading contracts can trade power after self-consuming in-house by using small-scale renewable power system for residential customers as well as electricity retailers. The power trading contracts applicable as a small-scale power system have a 'Net metering (NM)' and a 'Power Purchase Agreement (PPA)', and these two types of power trading contracts trade surplus power, but payment method of each power trading is different. The microgrid proposed in this paper is based on grid connected microgrid using Photovoltaic (PV) system and Energy Storage System (ESS), that supplied power to residential demand, we evaluate the operation cost of microgrid by power demand in each power trading contracts and propose the appropriate power trading contracts according to electricity demand.

• Restorative Dentistry and Endodontics
• /
• v.34 no.1
• /
• pp.1-7
• /
• 2009

The purpose of this study was to compare the stress distributions of NiTi rotary instruments based on their cross-sectional geometries of triangular shape-based cross-sectional design, S-shaped cross-sectional design and modified rectangular shape-based one using 3D FE models. NiTi rotary files of S-shaped and modified rectangular design of cross-section such as Mtwo or NRT showed larger stress change while file rotation during simulated shaping. The stress of files with rectangular cross-section design such as Mtwo, NRT was distributed as an intermittent pattern along the long axis of file. On the other hand, the stress of files with triangular cross-section design was distributed continuously. When the residual stresses which could increase the risk of file fatigue fracture were analyzed after their withdrawal. the NRT and Mtwo model also presented higher residual stresses. From this result, it can be inferred that S-shaped and modified rectangular shape-based files were more susceptible to file fracture than the files having triangular shape-based one.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.10 no.16
• /
• pp.101-106
• /
• 1987

Statistical control charts are useful tools to monitor and control the manufacturing processes and are widely used in most Korean industries. Many Korean companies, however, do not always obtain desired results from the traditional control charts by Shewhart such as the $\bar{X}$-chart, $\bar{X}$-chart, $\bar{X}$-chart, etc. This is partly because the quality charterstics of the process are not distributed normally but are skewed due to the intermittent production, small lot size, etc. In Shewhart $\bar{X}$-chart. which is the most widely used one in Kora, such skewed distributions make the plots to be inclined below or above the central line or outside the control limits although no assignable causes can be found. To overcome such shortcomings in nonnormally distributed processes, a distribution-free type of confidence interval can be used, which should be based on order statistics. This thesis is concerned with the design of control chart based on a sample median which is easy to use in practical situation and therefore properties for nonnormal distributions may be easily analyzed. Control limits and central lines are given for the more famous nonnormal distributions, such as Gamma, Beta, Lognormal, Weibull, Pareto, Truncated-normal distributions. Robustness of the proposed median control chart is compared with that of the $\bar{X}$-chart; the former tends to be superior to the latter as the probability distribution of the process becomes more skewed. The average run length to detect the assignable cause is also compared when the process has a Normal or a Gamma distribution for which the properties of X are easy to verify, the proposed chart is slightly worse than the $\bar{X}$-chart for the normally distributed product but much better for Gamma-distributed products. Average Run Lengths of the other distributions are also computed. To use the proposed control chart, the probability distribution of the process should be known or estimated. If it is not possible, the results of comparison of the robustness force us to use the proposed median control chart based oh a normal distribution. To estimate the distribution of the process, Sturge's formula is used to graph the histogram and the method of probability plotting, $\chi$$^2$-goodness of fit test and Kolmogorov-Smirnov test, are discussed with real case examples. A comparison of the proposed median chart and the $\bar{X}$ chart was also performed with these examples and the median chart turned out to be superior to the $\bar{X}$-chart.

• Asia pacific journal of information systems
• /
• v.17 no.2
• /
• pp.1-28
• /
• 2007

The success of new product development is a key factor for getting competitive advantages. Marketing research has been investigating marketing capability, manufacturing technical capability, cross-functional integration, market knowledge competence, market orientation, and competitive environment as the key success factors of new product development. Recently, the role of IT infrastructure in enhancing new product advantage is assumed in the literature. However, the empirical studies on the role of IT infrastructure are lacking. The purpose of this study is to empirically exam the impacts of IT infrastructure on new product competitive advantage. In this study, IT infrastructure is conceptualized as the flexibility of IT infrastructure. Based on previous research, a conceptual model is established by incorporating the direct impact of IT infrastructure flexibility and its indirect impact through the key success factors on new product development. To empirically test the research model, data are surveyed from a pair of IS department and Marketing department of 92 consumer goods manufacturers. By employing PLS technique, the measurement reliability and reliability of research variables are tested and the path analysis is conducted to do the hypothesis testing. The path analysis shows that IT infrastructure flexibility has no direct effect on new product advantage, However, the indirect effect of IT infrastructure is found, which is mediated by marketing capability, manufacturing technical capability, cross-functional integration, and market orientation respectively. Hence, The flexible IT infrastructure increases cross-functional integration (H1), market orientation (H3), marketing capability (H5), and manufacturing technical capability (H6). All success factors of new product development excepts for competitive environment have a positive association with new product competitive advantages (from H10 to H14). Finally, the path from IT infrastructure flexibility to cross-functional integration, to market orientation, to market knowledge capability, and to new product advantage is found as the strongest path. These results indicate that the flexible IT infrastructure enhances information sharing with multiple departments and collaboration within a distributed innovation environment. The collaboration among departments positively affects the level of customer and competitor intelligence. The ability to obtain knowledge about customers and competitors makes firms to adapt to a changing environment quickly and to respond to customers' demands adequately. The flexible IT infrastructure also enhances the capability of organization to more rapidly respond to the changes in product design resulting in faster product development and reduced costs. In addition to, it enhances marketing capability by the two-way communications with customers and the analyses of various kinds of customer data. In brief, the finding of this study suggests that the flexible IT infrastructure allows many firms to pursue sustained new product competitive advantages. This study advances research on IT infrastructure in two important aspects. First, by Integrating marketing research and IS research, this study develops a conceptual model on the role of IT infrastructure in enhancing new product advantage. Second, it empirically finds the indirect impacts of IT infrastructure on new product advantage, which confirms the potential for the IS field to contribute to new product development research. The limitations of this study are also discussed to provide research directions for future research.

• Smart Structures and Systems
• /
• v.29 no.2
• /
• pp.267-278
• /
• 2022

Pre-stressed concrete circular spun piles are widely used in various infrastructure projects around the world and offer an economical deep foundation system with consistent and superior quality compared to cast in-situ and other concrete piles. Conventional methods for measuring the lateral response of piles have been limited to conventional instrumentation, such as electrical based gauges and pressure transducers. The problem with existing technology is that the sensors are not able to assist in recording the lateral stiffness changes of the pile which varies along the length depending on the distribution of the flexural moments and appearance of tensile cracks. This paper describes a full-scale bending test of a 1-m diameter spun pile of 30 m long and instrumented using advanced fibre optic distributed sensor, known as Brillouin Optical Time Domain Analysis (BOTDA). Optical fibre sensors were embedded inside the concrete during the manufacturing stage and attached on the concrete surface in order to measure the pile's full-length flexural behaviour under the prescribed serviceability and ultimate limit state. The relationship between moments-deflections and bending moments-curvatures are examined with respect to the lateral forces. Tensile cracks were measured and compared with the peak strains observed from BOTDA data which corroborated very well. By analysing the moment-curvature response of the pile, the structure can be represented by two bending stiffness parameters, namely the pre-yield (EI) and post-yield (EI_cr), where the cracks reduce the stiffness property by 89%. The pile deflection profile can be attained from optical fibre data through closed-form solutions, which generally matched with the displacements recorded by Linear Voltage Displacement Transducers (LVDTs).