• Biomedical Science Letters
• /
• v.23 no.4
• /
• pp.388-394
• /
• 2017

Recently, coffee is the most popular beverage for modern people. A great number of substances are found in coffee beans and have been studied for many years such as aliphatic and aromatic compounds. However, studies on the physiological activity of coffee extracts are insufficient. This study was performed to determine the contents of caffeine and chlorogenic acid in coffee extracts according to the solvent and to investigate the physiological activity of coffee extracts. Coffee extracts were extracted by ultrasonication method with various types of solvents including distilled water, ethanol, and other organic solvents under $50^{\circ}C$ and $80^{\circ}C$. The contents of caffeine and chlorogenic acid in coffee extracts were determined by Liquid Chromatography-Mass Spectrometry (LC-MS). Also, cytotoxic and antioxidative effects of coffee extracts were evaluated with MTT and DPPH assays to analyze the physiological activity. As a result, it was confirmed that caffeine and chlorogenic acid contents were extracted in distilled water with the highest rate. Antioxidative activity was observed below 10-fold dilute of coffee extracts, however cytotoxicity was not observed. In conclusion, distilled water was the best solvent for extracting caffeine and chlorogenic acids from coffee bean with ultrasonication and these coffee extracts are less cytotoxic in human skin cell lines and have antioxidant effect.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.7 s.178
• /
• pp.1841-1846
• /
• 2000

To examine the effect of acid fog on the corrosion fatigue behavior in structural steel, fatigue tests under acid fog atmosphere were carried out in comparison with distilled water. The corrosive c omponents contained in acid fog pile up the corrosion products on crack face and show a crack branching and crack tip blunting. Therefore, due to these workings crack growth rate was reduced by decreasing the effective stress range in crack tip rather than under distilled water. Also the effect of sulfuric acid, which is the main component of acid fog, and testing speed on fatigue crack growth were examined. It was found that corrosion behavior was remarkably dependent upon pH and Hz rather than components of acid fog. According as pH and testing speed decrease below a specific value, crack growth was accelerated in comparison with distilled water. This reveals that due to liquid having strong acidity and slow speed of test the crack face dissolution was promoted, so crack closure was disturbed in the process of stress descent.

• Journal of Technologic Dentistry
• /
• v.23 no.1
• /
• pp.115-121
• /
• 2001

This study was investigated on effect of implant system about investment condition and burn out temperature. Posterior bridges were fabricated by using plastic sleeve and gold sylinder. The results were as follows; In plastic sleeve test and fitting cast copings. the phosphate bonded investment showed better gypsum bonded investment. The pure special liquid showed better margin fitness compared with mixed liquid (special liquid + distilled water). In gold cylinder test. the good burn out temperature of Ceramic PFG and Crown Gold was evaluated $0^{\circ}C$ to $820^{\circ}C$ and was decreased on $780^{\circ}C$ for 30 minutes. $0^{\circ}C$ to $750^{\circ}C$ and was decreased on $650^{\circ}C$ for 30 minutes.

• Food Science and Biotechnology
• /
• v.14 no.3
• /
• pp.334-339
• /
• 2005

An instrument using thermal probe method was designed to measure thermal conductivity of liquid and solid foods. Thermal conductivity probe was designed with diameter to length ratio of 100 and diameter of 0.51 mm to minimize axial flow effect on thermal conductivity measurement. Thermal conductivities of distilled/deionized water, glycerin, and beef frankfurter meat were measured at $20-80^{\circ}C$. Mean thermal conductivity values of water showed less than 2.0% difference from several reference values without using time correction factor or probe calibration constant. For glycerin, difference was less than 0.7% from reference values at $20-50^{\circ}C$. Mean values of thermal conductivity for beef frankfurter meat ranged from 0.389 to $0.350\;W/m{\cdot}K$ at $20-80^{\circ}C$.

• Proceedings of the PSK Conference
• /
• 2003.04a
• /
• pp.277.1-277.1
• /
• 2003

A high-performance liquid chromatographic method using the liquid extraction procedure was developed for the determination of L -FMAUS. a new L -FMAU derivative, in rat plasma and urine using 3-aminophenyl sulfone as an internal standard. A 100-${\mu}\ell$ aliquot of distilled water containing the L -cysteine (100 mg/$m\ell$) was added to a 100-${\mu}\ell$ aliquot of biological sample. L-Cysteine was employed to protect binding between 5'-thiol of l and protein in the biological sample. (omitted)

• The Journal of Korean Academy of Prosthodontics
• /
• v.9 no.1
• /
• pp.41-45
• /
• 1969

A major disadvantage of Dental cements is their solubility. So it is very important to measure the exact amount of solubility to select clinically suitable materials. The most common laboratory test for solubility is the measurement of disintegration in distilled water, as outlined in A.D.A. Specifications 8 and 9, In addition to the possible factors influencing the solubility, the experiments were all conducted in compliance with A.D.A. Specifications. The solubility of 2 Zinc Phosphate cements and 1 Silicate cement in time of dissolution, concentration of solute in dissolving medium, and type of dissolving medium were investigated. The following results were obtained. 1. Generally the materials were more soluble in organic acids than in distilled water. 2. The dissolution cements tends be minimized by tests utilizing prolonged storage in the same media. 3. In Acetic acid solution, Zinc Phosphate cements were more soluble than Silicate cement, and in Citric acid solution both were markedly more soluble. 4. Solubility was increased by continually presenting fresh liquid, unsaturated with solute, to the cement-water interface.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.7
• /
• pp.1272-1275
• /
• 2010

The Cu powder was prepared in distilled water. It has a wide range of size distribution. The submicron-sized particles in the Cu powder were removed by using continuous type centrifugal separator. The average particle size after classification was approximately 50nm. The XRD analysis showed that pure Cu phase and oxide phase ($Cu_2O$)weremixedinthepowderpreparedbythismethod.

• Journal of Korea Entertainment Industry Association
• /
• v.14 no.7
• /
• pp.589-597
• /
• 2020

The purpose of this study was to verify the acne care improvement effects of natural cosmetics with distilled bamboo vinegar contents and develop the materials for acne cosmetics. For the research subjects, 20 teenage boys and girls were selected and based on random number table, 10 subjects were assigned in the control group that used natural cosmetics (foam cleanser, toner, facial pack) and 10 subjects were assigned in the experimental group that used natural cosmetics with distilled bamboo vinegar contents (foam cleanser, toner, facial pack). The natural cosmetics was used for 12 weeks, and Mark-·Vu facial analysis system was used to measure the sebum, pore size, and redness before using the natural cosmetics, 6 weeks after using the natural cosmetics, and 12 weeks after using the natural cosmetics. For the collected data, SPSS v. 21.0 statistics package program was used for the analysis, and the results are as follows. First, it is a safe natural cosmetics based on the results of the patch test to confirm the skin safety of the natural cosmetics. Second, homogeneity was secured based on the results of the test of homogeneity for the sebum, pore size, and redness of the control group and experimental group. Third, in the verification of acne skin improvement effects of natural cosmetics with distilled bamboo vinegar content, the experimental group had higher reduction rate of changes in the sebum, pore size, and redness on the forehead and right cheek compared to the control group. Therefore, it was identified that the natural cosmetics with distilled bamboo liquid content is safe for the skin and effective for reducing the sebum, pore size, and redness for acne skin. For this reason, it is anticipated for distilled bamboo vinegar to be used in the cosmetics industry.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.8
• /
• pp.403-409
• /
• 2018

Inconel 713C which of a commercial Ni super alloy have the composition of 70 % Ni, 12 % Cr, 6 % Al and 4 % Mo. Mo is very expensive and have some economic value to recover in the alloy. In this study, liquid-liquid exraction(solvent extraction and stripping) has been performed to separate Mo from the synthetic leaching solution of spent Inconel 713C alloy and prepare to Mo powder by dying, evaporation and heat treatment. The experiments were conducted by using synthetic leaching solution which was prepared $NaMoO_4$ $2H_2O$ by dissolved in distilled water. Alamine336 and Cyanex272 dissolved in kerosene were used as extractants. The extraction percentage of Mo by Alamine336 is 99 % in the condition of the range of pH 1 to 4 and 1 % of concentration of Alamine336. The stripping solutions are used by HCl, $H_2SO_4$ and $HNO_3$ solutions and the concentrations were controlled by distilled water. The concentrations of HCl, $H_2SO_4$ and $HNO_3$ as stripping solutions are increased, the stripping percentages of Mo are increased and the stripping percentage of Mo by $HNO_3$ is higher than other stripping solutions. After liquid-liquid extraction and heat treatment, $MoO_3$ powder which of the purity of 97.5 % was prepared.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.9
• /
• pp.736-740
• /
• 2010

Nickel wires of 0.8 mm in diameter and 80 mm in length were electrically exploded in liquid media such as water, ethyl alcohol. The distribution of particle sizes was broad from a few micrometers to tens of nanometer. It was identified that the particles could be classified according to its sizes by using centrifugal separator. The powder prepared in distilled water showed mainly pure metallic Ni phase although a little oxide phase was observed. The powders prepared in ethyl alcohol showed complicated unknown phases, which is attributed to the compound of carbon in the organic liquid. This unknown phase was turned to pure metallic Ni phase after heat treatment.