• 한국해양공학회지
• /
• 제16권1호
• /
• pp.64-70
• /
• 2002

This paper shows the results of the development of a small size of digital type continuous and intermittent welding auto-carriage based on microprocessor (Intel 80196KC) for welding process with long welding line. The developed welding auto-carriage loads welding torch and tracks welding line. It is an automaton largely used for welding process with a lot of long welding lines such as shipbuilding and structure. Most traditional auto-carriages have been developed based on analog circuit for open loop control. So this analog circuit welding auto-carriage cannon control welding speed. Specially welding auto-carriage for intermittent welding condition is so complicated and has the low precision of control performance in welding distance and non-welding distance. The auto-carriage developed in this paper has the following characteristics: It has not only functions of traditional carriage but also functions such as pseudo-welding process of big iron structures, intermittent welding in order to limit heat for welding thin plates, crater treatment of the final step of welding, acceleration at the initial step of welding and deceleration in the final step of welding. The main control board of auto-carriage, power supply system and DC motor drive wee developed and manufactured. The welding speed and the welding distance of the developed auto-carriage are controlled accurately by feedback control using photo-sensor. Hardware and software robust against the heat and noise produced on the welding process are developed.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -3
• /
• pp.1535-1538
• /
• 2002

The flexibility of content addressable mem-ory (CAM) can greatly be extended through the use of trits (ternary digits) Trits consist of binary logical values “0” and “1” with addition of “x” (“dont’t care”). The “dont’t care“is extremely useful for providing com- pact representation of sets of bit strings. In this paper, we propose a new ternary CAM with Hamming distance search functions. Each memory cell in the CAM consists of a pair of lambda diodes which can store trits, namely, a logical “0”, “1” and “x” (“dont’t care“). The CAM can compare stored data and an input data in parallel, and find stored data with Hamming distance within a certain range (“near match“). Also, the interrogation characteristics of the ternary CAM are analyzed in detail. Furthermore, the results obtained these analyses are fully confirmed by simulation using the circuit analysis program HSPICE.

• 한국산업융합학회 논문집
• /
• 제23권3호
• /
• pp.419-425
• /
• 2020

There are many accident risks in logging operation of forestry such as struck by felled trees and caught in, under, or between felled trees. These accidents are primarily occurred by not keeping a safe distance between workers. According to the forestry safety instruction, workers are not supposed to go into the safety zone which is a circle with a radius of more 2 times the height of felling tree. However, this rule does not keep because of poor safety consciousness, poor sight and extreme noise of logging operation machines. This problem causes many major accidents every year. To solve this problem, we made forestry safety helmets based on IoT technology. These helmets have functions to make a visual and an acoustic alarm signal when reach the distance between workers within 20 meters. We developed the algorithm to operate the helmet's functions and conducted tests to check the functions. As a result of tests, we assured the normal system operating conditions.

• Bulletin of the Korean Chemical Society
• /
• 제5권4호
• /
• pp.162-167
• /
• 1984

Equilibrium and dynamical behaviors of an n-alkane poymer (decane) in solution have been investigated by a molecuar dynamics simulation method. The polymer is assumed to be a chain of elements $(CH_2)$ interconnected by bonds having a fixed bond length and bond angle, but esch bond of the polymer is allowed to execute hindered internal rotation. The calculation explicitly considers the molecular naturer of solvent by including the intermolecular interactions between slovent-solvent molecules and chain element-solvent molecule. We present the results of calculations on (1) equilibrium properties (the solvent molecule-chain element pair correlation function, chain element-chain element pair correlation function, the mean square end-to-end distance and the mean square radius of gyration of the polymer) and (2) dynamic properties (four different autocorrelation functions, namely, the autocorrelation functions for the end-to-end distance and the radius of gyration, and the velocity autocorrelation functions for the center of mass and the end point of the chain). We found that the physical properties of the polymer chain depends sensitively on temperature. Comparison of the present work with other authors' results is also presented.

• 대한기계학회논문집A
• /
• 제29권9호
• /
• pp.1217-1224
• /
• 2005

To improve the accuracy of a metamodel, additional sample points can be selected by using a specified criterion, which is often called sequential sampling approach. Sequential sampling approach requires small computational cost compared to one-stage optimal sampling. It is also capable of monitoring the process of metamodeling by means of identifying an important design region for approximation and further refining the fidelity in the region. However, the existing critertia such as mean squared error, entropy and maximin distance essentially depend on the distance between previous selected sample points. Therefore, although sufficient sample points are selected, these sequential sampling strategies cannot guarantee the accuracy of metamodel in the nearby optimum points. This is because criteria of the existing sequential sampling approaches are inefficient to approximate extremum and inflection points of original model. In this research, new sequential sampling approach using the sensitivity of metamodel is proposed to reflect the response. Various functions that can represent a variety of features of engineering problems are used to validate the sensitivity approach. In addition to both root mean squared error and maximum error, the error of metamodel at optimum points is tested to access the superiority of the proposed approach. That is, optimum solutions to minimization of metamodel obtained from the proposed approach are compared with those of true functions. For comparison, both mean squared error approach and maximin distance approach are also examined.

• 대한수학회지
• /
• 제20권2호
• /
• pp.195-200
• /
• 1983

• 한국산학기술학회논문지
• /
• 제11권12호
• /
• pp.5036-5041
• /
• 2010

이 논문은, 델타함수열에 기본을 둔 블라인드 알고리듬을 복소 채널에 적용할 수 있도록 그 복소화 과정을 소개하고 복소 채널의 블라인드 등화에서 채널의 위상왜곡 문제를 해결할 수 있음을 보였다. 또한, 기존의 랜덤 심볼열을 사용한 방식에 비해 가우시안 커널의 폭이 비교적 작은 값을 갖는 것으로 나타나, 출력 신호점을 원하는 심볼점에 끌어오는 정보 포텐셜의 값이 보다 큰 것으로 분석되었다. 16 QAM 시스템에 복소 위상왜곡 채널을 기준으로 하여 자승평균오차 (MSE)의 수렴 성능과 심볼점 집결성능을 평가하였으며 시뮬레이션 결과에서 채널 위상 왜곡이 효과적으로 보상됨을 성상도 성능에서 보였으며 정상상태 MSE 성능에서는 기존 방식보다 5 dB 이상 개선되었다.

• 대한물리치료과학회지
• /
• 제10권2호
• /
• pp.17-28
• /
• 2003

The aim of this study was to investigate the effects of treadmill gait training on the functional characteristics and the temporal-distance parameters of gait in hemiplegic patients, as compared with conventional gait training. The subjects of this study were 32 hemiplegic patients who had been admitted or were visited out-patients at Kangdong Sacred Heart Hospital, Hallym University, from March 3 through April 25, 2003. These subjects were randomly divided into treadmill gait training group or conventional gait training group. We evaluated the gait ability, motor functions, muscle strength, spasticity, physiological cost index, and temporal-distance parameters. We analyzed the changes between pre and post training in each groups, and the difference between two groups. Temporal-distance parameters were obtained using the ink footprint method and then energy consumption using physiological cost index. The results were as follows: 1. After a six-week training, treadmill gait training group significantly improved, as. compared to pre-training, in gait ability, motor functions for the leg and trunk and gross function, muscle strength of the lower limb, gait speed, cadence, step length both on the affected and on the unaffected side, step length symmetry, and energy consumption(p<0.05). 2. After a six-week training, conventional gait training group significantly improved, as compared to pretraining, in gait ability, motor functions for the leg and trunk, muscle strength of the lower limb, spasticity the upper limb, gait speed, cadence, step length both on the affected and on the unaffected side, and energy consumption(p<0.05). 3. After a six-week training, the treadmill gait training group significantly improved, as compared to the conventional gait, training, in gait speed and step length on the unaffected side. These results show that treadmill gait training was improved gait speed and step length on the unaffected side of hemiplegic patients, as compared with conventional gait training. Further research is needed to confirm the generalization of these findings and to identify which hemiplegic patients might benefit from treadmill gait training.

• 한국지능시스템학회:학술대회논문집
• /
• 한국지능시스템학회 2007년도 추계학술대회 학술발표 논문집
• /
• pp.366-369
• /
• 2007

In this paper we derived fuzzy entropy that is based on similarity measure. Similarity measure represents the degree of similarity between two informations, those informations characteristics are not important. First we construct similarity measure between two informations, and derived entropy functions with obtained similarity measure. Obtained entropy is verified with proof. With the help of one-to-one similarity is also obtained through distance measure, this similarity measure is also proved in our paper.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1994년도 제11회 음성통신 및 신호처리 워크샵 논문집 (SCAS 11권 1호)
• /
• pp.133-137
• /
• 1994

In this paper, a method for designing an optimal weight function for the weighted cepstral distance measure is proposed. A conventional weight function or cepstral lifter is obtained eperimentally depending on the spectral components to be emphasized. The proposed method minimizes the error between word reference patterns and the traning data. To compare the proposed optimal weight function with conventional function, speech recognition systems based on Dpynamic Time Warping and Hidden Markov Models were constructed to conduct speaker independent isolated word necogination eperiment. Results show that the proposed method gives better performance than conventional weight functions.