• 상하수도학회지
• /
• 제23권6호
• /
• pp.703-709
• /
• 2009

In this study, an artificial-waterway experiment was conducted, using an attachment plate, on which algae from Nanakita river was placed, to examine the influence exerted by the variation of the dissolved-silicon concentration on the river periphyton. As a result, the variation of the dissolved-silicon concentration was found to exert an influence on the density of the adhesion diatom, and the mole ratio limits of the silica were about $Si/P{\fallingdotseq}182$ and $Si/N{\fallingdotseq}16.4$ or less. Moreover, the mole ratio that is necessary for proliferation was found to be larger than the value of the oceanic algae. Senedesmus sp. and Ankistrodesmus sp., which used silica in adhesion chlorophyta, received the influence of the silicon concentration strongly, and the twowere found to be superior in the environment, making silica a restriction factor.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2000년도 추계학술대회 논문집(Proceeding of the KOSME 2000 Autumn Annual Meeting)
• /
• pp.143-151
• /
• 2000

Dissolved silica is make some critical trouble at steam turbine. And, we must measure it to ppb level. We were looking for the best measuring method of the silica. Via this study, we could found it in the N-IR spectroscopy technology. This dissertation have been discuss about system structure, system fundamentals and performance test. At the test, we were study in the spectral interference of $NH_3$. We know that existing system had some problem. It is structural frailties of single beam type. Therefore we were study for double beam type structure. And we obtain a good result. In the result, it have been discuss that conduct a test of $NH_3$ effect.

• Journal of Advanced Marine Engineering and Technology
• /
• 제26권3호
• /
• pp.382-388
• /
• 2002

Dissolved silica is one of fatal components at a boiler facility Therefore, a dissolved silica measurement system should be equipped for managing efficiently the boiler facility. Most of silica measurement systems are composed of a sensor module of single-beam type structure, and silica density is measured with a infrared spectrometry using the Lambert-beer method. However, such a system occurs measuring error of large range and inconsistency of a light source, because of measuring a standard sample and a measuring sample alternatively. This paper introduces a method that the sensor module has a split-beam type structure and a tungsten lamp. The proposed system can measure silica density quickly and precisely more than those composing of a single-beam type structure, because of measuring and comparing with two samples at a same time. And examination results are shown to compare efficiencies of the system and existing commercial products, and for an ammonia influence.

• 한국해양학회지:바다
• /
• 제24권2호
• /
• pp.226-235
• /
• 2019

동해에서 용존 규소의 분포 특성을 현존하는 가장 광역적인 탐사였던 1999-2000년도 ONR-JES 탐사 자료와 1970년도 일본 자료와 대조해서 살펴보았다. 동해에서 현재 진행 중인 해수교체 양상의 변동과 용존 규소의 분포를 인산염 대 용존 규소의 비로 고찰한 결과로 일차생산에 대한 용존 규소의 제한이 점차 가중될 것이란 가설을 제시하였다. 용존 규소의 제한은 일차생산자의 종조성을 바꾸고 이어서 내려보내기 생산에서 유기입자의 침강이 광물질 껍데기 보다는 유기 점착물 침강에 의한 기여가 커질 것이라 예상된다. 해양에서 규소 순환이 탄소 순환과 깊숙이 연계되어 있는 점에 비추어 미래의 온난화된 대양이 동해처럼 거동하게 될지는 시의 적절한 연구 주제가 될 것이라 전망하였다.

• 자원리싸이클링
• /
• 제26권3호
• /
• pp.53-60
• /
• 2017

블랙드로스에는 금속 알루미늄, 알루미나, 실리카, 산화마그네슘, 가용성 염 및 미량 성분이 함유되어 있다. 블랙드로스를 사용가능한 재료로 전환시키기 위해서는 실리카의 양을 조절하는 것이 중요하다. 먼저 가용성 염인 염화나트륨과 염화칼륨은 $50^{\circ}C$에서 물에 용해되었다. 물세척 후 잔사에 함유된 실리카, 알루미나, 산화마그네슘 및 산화타이타늄의 침출거동을 NaOH의 농도와 반응온도를 변화시키며 조사하였다. 반응온도 $25{\sim}95^{\circ}C$에서 알루미나의 침출율은 온도에 비례하나 실리카의 침출의 경우에는 최적 온도가 존재하였다. 한편 2~6 M의 NaOH용액에 산화마그네슘은 전혀 용해되지 않았다. 5 M의 NaOH와 $95^{\circ}C$에서 알루미나와 실리카의 침출율은 각각 80과 68%이었다.

• 한국표면공학회지
• /
• 제33권5호
• /
• pp.381-386
• /
• 2000

It was found that colloidal silica sprayed to the galvanized steel sheet apparently made the molten zinc layer solidified to be the randomly oriented fine grains. Its spraying effect was also little affected by steel temperature that had been considered as one of the major operating factors in this process. From the results of surface analysis, it is considered that aluminum dissolved in coating layer reduces silica to silicon by the oxidation-reduction reaction, and that the reduced silicon acts as a more effective nucleus in solidification reaction than phosphate salt, siica and alumina.

• Journal of Advanced Marine Engineering and Technology
• /
• 제29권1호
• /
• pp.98-106
• /
• 2005

The chemical conversion film formed on magnesium alloy was investigated by using the colloidal silica with some parameters such as solution pH. temperature, solution conditions, and treatment time. Moreover. the solutions consisted of colloidal silica titanium sulfate, and cobalt ions were used for the colloidal silica film to having a good corrosion resistance and adhesion properties. It was thought that the film at 298K was made with combination of Si-O. The quantity of film formed at high temperature such as 333K and 353K is smaller than dissolved quantity during chemical conversion treatment. Adding $CoSO_4$ to the colloidal silica solution enhanced the adhesion force between the silica film and magnesium substrate, The optimum conditions for the chemical conversion treatment solution were PH 2.90 s treatment, and 298K.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2002년도 총회 및 춘계학술발표회
• /
• pp.243-245
• /
• 2002

Brackish water desalination using reverse osmosis(RO) membrane is more useful and economic than sea water to solve the shortage of fresh water supply because of its low total dissolved solid(TDS) contents. Silica and humic acid in brackish water make serious fouling problems and cause the decline of permeate flux and increase of operating pressure. In this study, the experiments for removal of silica and humic acid were conducted with calcite particles to prevent membrane fouling and investigated the effect of pH of feed water Adsorption of silica to calcite was higher at pH=7.5 than 9.5 and removal rate was increased according to increase of initial concentration of silica. The effect of pH on adsorption of humic acid was not significant but at low initial concentration the adsorption of humic acid was enhanced at pH 7.5. The result of this study expect to apply to brackish water desalination experiment of flat-sheet reverse osmosis membrane.

• 동력기계공학회지
• /
• 제15권4호
• /
• pp.75-78
• /
• 2011

There are various types of materials used in electronic industry, such as electrode material, conductor, insulator, anode, cathode and semiconductor. Electrode material type is Cu, Ti, ZnO and so on. Especially if we use mixed ZnO in soil cement or silica gel, we can have advantages in ice road to prevent freezing. We have great impact if we use supported in inorganic substances like silica gel. In this paper we have studied that ZnO supported silica gel and its properties. Zinc acetate dissolved in distilled water were loaded on the silica gel by the reaction with ammonia at $80^{\circ}C$. And we investigated particle structures of ZnO by scanning electron microscopy(SEM) and X-ray diffraction(XRD).

• 융합정보논문지
• /
• 제8권5호
• /
• pp.45-50
• /
• 2018

형광 염료가 도핑 된 실리카 나노입자는 DNA 마이크로 에레이와 같은 바이오 라벨링 및 바이오 이미징에 활용되고 있으며, 높은 생체 적합성과 낮은 독성 및 높은 친수성의 특성을 가지고 있어 많은 주목을 받고 있는 기능성 나노소재이다. 본 논문에서는 형광 유기염료를 에탄올과 탈이온수에 각각 용해시킨 후 형광염료를 실리카 나노입자에 물리적으로 흡착시키는 방법과 화학적으로 도핑 시키는 방법으로 실리카 나노입자를 합성한 후 365 nm 파장의 자외선을 조사하여 형광특성을 분석하였다. 연구결과 형광 염료를 물리적으로 흡착시킨 실리카 나노입자보다 화학적으로 형광 염료를 도핑 시킨 실리카 나노입자의 형광특성이 우수하였으며, 도핑 된 형광 염료의 양이 많을수록 형광특성이 우수하였다. 형광 염료를 용해시키는 용매의 경우, 에탄올이 탈이온수와 비교하여 탁월한 형광 특성을 나타내었다. 또한 순수한 형광 염료와 형광 염료가 도핑된 실리카 나노입자의 광안정성을 조사한 결과, 형광 염료가 도핑 된 실리카 나노입자의 광안정성이 보다 우수한 것으로 나타났다. 이러한 연구결과를 바탕으로 형광염료가 최적으로 도핑 된 실리카 나노입자를 바이오 이미징 에이전트로 사용한다면 높은 광안정성과 형광특성으로 인하여 인체 내부의 생체 모니터링에 유용하게 활용될 것으로 전망된다.