Journal of Power System Engineering (동력기계공학회지)

The Korean Society for Power System Engineering (한국동력기계공학회)
권호 표지
DOI QR코드

DOI QR Code

A Study on the ZnO Supported Silica Gel

ZnO가 담지된 실리카 겔 연구

  • 김시영 (부경대학교 기계시스템공학과) ;
  • 김민연 (부경대학교 산업대학원) ;
  • 주창식 (부경대학교 화학공학과)
  • Received : 2011.05.26
  • Accepted : 2011.08.01
  • Published : 2011.08.31
Download PDF
⟨ Previous Next ⟩

Abstract

There are various types of materials used in electronic industry, such as electrode material, conductor, insulator, anode, cathode and semiconductor. Electrode material type is Cu, Ti, ZnO and so on. Especially if we use mixed ZnO in soil cement or silica gel, we can have advantages in ice road to prevent freezing. We have great impact if we use supported in inorganic substances like silica gel. In this paper we have studied that ZnO supported silica gel and its properties. Zinc acetate dissolved in distilled water were loaded on the silica gel by the reaction with ammonia at $80^{\circ}C$. And we investigated particle structures of ZnO by scanning electron microscopy(SEM) and X-ray diffraction(XRD).

Keywords

References

  1. K. Fujita, K. Murata, T. Nakazawa and I. Kakama, 1984, "Crystal Shapes of Zinc Oxide Prepared by the Homogeneous Precipitation Method", Yogyo-Kyokai-Shi, Vol. 92, No. 4, pp. 227-230. https://doi.org/10.2109/jcersj1950.92.1064_227
  2. S. M. Haile and D. Johnson Jr W. Johnson Jr, 1989, "Aqueous Precipitation of Spherical Zinc Oxide Powders for Varistor Applications", Journal Am. Ceramic Society. Vol. 72, No. 10, pp. 2004-2008. https://doi.org/10.1111/j.1151-2916.1989.tb06020.x
  3. M.E. Costa, H. M. Diz and J. L. Baptista, 1986, "The Influence of Deflocculants on the Precipitation, Conformation and Sintering Behavior of Zinc Oxide Powder", Science of Cermics, Vol. 14, pp. 299-304.
  4. T. Quan, O. Sakurai, N. Mizutani, M. Kato, 1986, "Preparation of Spherical Fine ZnO Particles by the Spray Pyrolysis Method using Ultrasonic Atomization Technique", Journal of Material Science, 21, pp. 3698-3702. https://doi.org/10.1007/BF02403024
  5. O. Sakuri, I. Sawaki, N. Ohkuma and M. Kato, 1984, "Formation of Needle-like Zinc Oxide Particles and the Analysis of particle of Morphology", The Chemical Society of Japan, pp. 832-842.
  6. R. J. Lauf and W. D. Bond, 1984, "Fabrication of High-Field Zinc Oxide Varistors by Sol-Gel processing", Ceramic Bulletin, pp. 278-281.
  7. M. Ohyama and H. Kozuka, 1996, "Preparation of ZnO Films with Preferential Orientation by Sol-Gel Method", Journal of the Ceramic Society of Japan, Vol. 104, pp. 296-300. https://doi.org/10.2109/jcersj.104.296
  8. A. K. Kirakosyan, 1961, "Precipitation of Basic Zinc Chlorides with Ammonia", Russian Journal of Inorganic chemistry, Vol. 6, pp. 876-878.
  9. K. Fujita and I. Kayama, 1981, "Synthesis of Zinc Oxide by the Homogeneous Precipitation Method", Journal of the Japan Society of Powder Metallurgy, Vol. 28, pp. 33. https://doi.org/10.2497/jjspm.28.33
  10. S. G. Kang, 1992, "Prepared and Sintering Behavior of ZnO Powder by Precipitated Method", Degree of Master
  11. 김봉철 외 4인, 1998, "침전법에 의한 ZnO 분체 합성 및 그 형광특성", Journal of the Korean Ceramic Society, Vol. 35, No. 2, pp. 107-114.
  12. 김연상, 김태진, 1999, "침전법에 의한 구형 산화 아연 합성에 관한 연구", Journal of the Industrial Technology Research institute Soongsil University, Vol. 29, pp. 133-140.