• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• v.4 no.3
• /
• pp.165-171
• /
• 2000

Experiments were carried out to measure variations in the oxidation potential and current density using the polarization curves of polycarbonate. The results were then examined to identify the influences affecting the oxidation potential related to various conditions, such as temperature, pH, and oxydase(citrate and lipase). The lines representing the active anodic and cathodic dissolution shifted only slightly in the potential direction relative to temperature, pH, and the effect of the enzyme. The Tafel slope for the anodic and cathodic dissolution was determined such that the reversibility polarization was indicated as being effected by various conditions. The slope of the polarization curves describing the active-to-passive transition region shifted noticeably in their direction. Also, by varying the conditions, the optimum conditions for the most ready transform were identified, including temperature, pH, oxidation rate, and resistance of oxidation potential. The critical oxidation sensitivity(I(sub)r/I(sub)f) of the anodic current density peak and maximum passive current density was also determined, which is used in measuring the critical corrosion sensitivity of a polycarbonate.

• Journal of Sericultural and Entomological Science
• /
• v.45 no.2
• /
• pp.121-125
• /
• 2003

Dissolution of Antheraea pernyi silk fiber was carried out in a zinc nitrate 6 hydrate (Zn(NO$_3$)$_2$ㆍ6$H_2O$) solution with various dissolving conditions. The solubility was significantly dependent on the concentration of zinc nitrate, dissolving temperature and time. Regenerated A. pernyi silk fibroin powder was obtained through dialysis process to remove chaotropic salt. FTIR and X-ray diffractometer showed that the conformation of regenerated A. pernyi silk powder was sheet structure.

• Journal of Pharmaceutical Investigation
• /
• v.38 no.5
• /
• pp.289-293
• /
• 2008

To develop a poloxamer-based solid suppository with poloxamer and polyethylene glycol mixtures, the melting point of various formulations composed of P 188 and propylene glycol were investigated. The dissolution and antitumor activity of clotrimazole delivered by the poloxamer-based suppository were performed. The poloxamer mixtures composed of P 188 and propylene glycol were homogeneous phases. P 188 greatly affected the melting point of poloxamer mixtures. In particular, the poloxamer mixture [P 188/propylene glycol(70/30%)] with the melting point of about $32^{\circ}C$ was a solid form at room temperature and instantly melted at physiological temperature. Furthermore, the ratio of P 188/propylene glycol greatly affected the dissolution rates of clotrimazole from poloxamer-based suppository. It gave the more effective anti-tumor activity than conventional PEG-based suppository due to fast dissolution. Thus, the clotrimazole-Ioaded poloxamer-based solid suppository was an effective rectal dosage form with anti-tumor activity.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.3 no.3
• /
• pp.198-202
• /
• 2002

Ethanolamine (ETA), instead of ammonia, increases pH in the secondary system water and inhibits the corrosion of iron, which improves the integrity of the steam generator tubes. The different physicochemical properties of ETA from ammonia provide the different effect on the dissolution and adsorption of corrosion products entering the steam generator and thus on the hideout returns of ionic impurities in the steam generator sludge pile. The objective of this study was to investigate those properties with increasing temperature. ETA is more adsorbed onto the iron oxides, which increases the solubility of them and also lowers the hideout returns due to the reduced impurities adsorbed.

• Journal of Sericultural and Entomological Science
• /
• v.44 no.2
• /
• pp.87-92
• /
• 2002

Dissolution of Antheraea pernyi silk fiber was carried out in a zinc chloride solution with various dissolving conditions. The solubility was significantly dependent on the concentration of zinc chloride, dissolving temperature and time. The proper conditions of dissolution were found as 8 M zinc chloride, 70$^{\circ}C$ temperature and 30 min dissolving time. Regenerated A. pernyi silk fibroin powder was obtained through dialysis. FTIR and XRD showed that regenerated A. pernyi silk powder was composed of a ${\beta}$-sheet as well as an ${\alpha}$-helix conformation.

• Journal of Electrochemical Science and Technology
• /
• v.15 no.2
• /
• pp.220-241
• /
• 2024

Due to its unique advantages, electrochemical machining (ECM) is playing an increasingly significant role in the manufacture of difficult-to-machine materials. Most of the current ECM research is conducted at room temperature, with studies on ECM in a cryogenic environment not having been reported to date. This study is focused on the electrochemical dissolution characteristics of typical iron and nickel base alloys in NaNO₃ solution at low temperature (-10℃). The polarization behaviors and passive film properties were studied by various electrochemical test methods. The results indicated that a higher voltage is required for decomposition and more pronounced pitting of their structures occurs in the passive zone in a cryogenic environment. A more in-depth study of the composition and structure of the passive films by X-ray photoelectron spectroscopy and electrochemical impedance spectroscopy showed that the passive films of the alloys are modified at low temperature, and their capacitance characteristics are more prominent, which makes corrosion of the alloys more likely to occur uniformly. These modified passive films have a huge impact on the surface morphologies of the alloys, with non-uniform corrosion suppressed and an improvement in their surface finish, indicating that lowering the temperature improves the localization of ECM. Together with the cryogenic impact of electron energy state compression, the accuracy of ECM can be further improved.

• Journal of the Korean Society of Tobacco Science
• /
• v.28 no.2
• /
• pp.117-123
• /
• 2006

The pulping process in a papermaking process for a reconstituted tobacco sheet (RECON) was evaluated. For the practical information, the experiments were conducted in a real mill. Two pulping conditions were chosen and changed depending on the feasibility, such as the pulping temperature and the properties of pulping water. The higher pulping temperature resulted in the easier dissolution of solubles from the raw materials. However, the efficiency of screw press process was decreased by the higher pulping temperature, which resulted in the reduction of the HWS and the concentration in the #1 screw press filtrate. The addition of SEL(Strong extracted liquor) to pulper affected the efficiency of dissolution and the final concentration of #1 screw press filtrate. Although the higher SEL resulted in the less dissolution of the solubles from the raw materials, the concentration of the #1 screw press filtrate was greatly increased by the higher addition of SEL, which could provide much better efficiency to the following evaporation process of the filtrate and could increase the whole productivity.

• Biomolecules & Therapeutics
• /
• v.8 no.4
• /
• pp.332-337
• /
• 2000

Physicochemical properties of aspalatone (acetylsalicylic acid maltol ester, AM), which has been recently found to have an antithrombotic effect, were studied in terms of solubility, dissolution, partition coefficient (Pc) and stability. The solubility of AM at 37$^{\circ}C$ was about 1.2 mg/ml and the P$_{c}$ value for n-octanol/water and chloroform/water was 11.4 and 382.6, respectively. Dissolution rates of AM at pH 1.2 and 6.8 were more than 80% within 30 min. The degradation of AM followed apparent first-order kinetics, and was dependent on temperature, pH and ionic strength. From the pH-rate profile, the optimal pH was found to be at around 4.0. Half-lives at pH 1.2 and 6.8 were 33.5 and 44.4 hr, respectively. The degradation rate of AM at pH 1.2 was somewhat faster than that of aspirin, but at pH 7.0, the degradation rate of AM was slower than that of aspirin.n.

• Journal of Pharmaceutical Investigation
• /
• v.35 no.2
• /
• pp.107-110
• /
• 2005

To develop a clotrimazole-loaded solid suppository with poloxamer and propylene glycol, the melting points of various formulations composed of poloxamer 188 (P 188) and propylene glycol were investigated. The dissolution study of clotrimazole delivered by the suppository composed of P 188 and propylene glycol was performed. The mixtures composed of P 188 and propylene glycol were homogeneous. Propylene glycol affected the melting points of poloxamer mixtures. In particular, the mixture [P 188/propylene glycol (70/30%)] with the melting point of about $32^{\circ}C$ was a solid form at room temperature and instantly melted at physiological temperature. Furthermore, propylene glycol affected greatly the dissolution rates of clotrimazole from the suppository. Dissolution mechanism analysis showed the dissolution of clotrimazole was proportional to the time. Our results indicated that the solid suppository with P 188 and propylene glycol would be a candidate of rectal dosage form for clotrimazole.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.11 no.3
• /
• pp.89-95
• /
• 2001

The CZ-silicon crystal was annealed at $1350^{\circ}C$ to dissolve the vacancy type grown-in defects. A this temperature, the equilibrium concentration of the oxygen in the silicon crystal is around $1.7{\times}10^{18}$ which induces the oxygen undersaturation in the silicon crystal. This situation results in the faster dissolution of the grown-in defects in the bulk of the silicon wafer than near the surface. This indicates the possibility that the presence of the higher concentration of silicon interstitial hinders the dissolution of the grown-in defects, which were known to compose of the vacancy clusters with surrounding silicon oxide film. This expectation was confirmed by the observation that the slower dissolution of the grown-in defects near the surface of the silicon wafer in the oxygen atmosphere than in the argon atmosphere. This result is quite opposite to the previous argument hat presence of the excess silicon interstitial leads to faster dissolution of the vacancy type defects.