• Archives of Pharmacal Research
• /
• v.8 no.1
• /
• pp.7-14
• /
• 1985

Membrane-coated tablet of isonicotinic acid hydrazide (INAH) which releases INAH at the zero-order kinetics was deveoped. It consisted of a soluble tablet core surrounded by a porous membrane which controls the diffusion rate. Tablet cores were prepared by compressing granules of INAH and polyvinyl chloride (PVC) dissolved in methyl ethyl ketone in which micronized sucrose were suspended. Diffusion rate of INAH from the tablet through the membrane was constant until the loaded INAH in the core was almost released. The rate was independent of pH of the dissolution medium. Water-soluble sucrose particles behaved as a poreproducing material in the water-insoluble PVC film coat. The pH independency of the rate was probably due to the high solubility of INAH in the water of wide pH range. The diffusion rate of INAH could be controlled by chnaging the composition of the membrane or the coat weight. This membrane-coated INAH tablet seemed to be a powerful candidate for the controlled release drug delivery system (DDS) of INAH or other highly watersoluble drugs.

• Transactions of Materials Processing
• /
• v.26 no.1
• /
• pp.48-54
• /
• 2017

The dissolution and precipitation of Nb, which has been known as strong carbide-forming element, play a key role in controlling phase transformation kinetics of microalloyed steels. In this study, we analyzed both numerically and experimentally the precipitation behavior of Nb-microalloyed steel and its effect on the austenite decomposition during cooling. Nb precipitation in austenite matrix could be predicted by the thermo-kinetic software MatCalc, in which interfacial energy between precipitate and matrix is calculated. The simulated precipitation kinetics fairly well agrees with the experimental observations by TEM. Austenite decomposition, which is strongly affected by Nb precipitation during cooling, was measured by dilatometry and was modeled on the basis of a Johnson-Mehl-Avrami-Kolmorgorov(JMAK) equation. It was confirmed that the dissolved Nb delays the austenite decomposition, whereas, the precipitated Nb accelerates phase transformation during the austenite decomposition.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.13 no.2
• /
• pp.51-55
• /
• 2003

The interrelation into nucleation and thermodynamic parameters of solutions has been established by plotting of various dependencies: the enthalpy of dissolution, solubility product and super-solubility on ionic salt radii and also the extent of deviation from an ideal Debye -Huckel model of electrolyte solution on solubility product. The possible methods of perfect crystal growth from aqueous solution have been found a priori by separating of known set of pair values of solubility and super-solubility into no less than six-nine characteristic and distinctive sub-sets.

• Journal of Pharmaceutical Investigation
• /
• v.39 no.4
• /
• pp.269-273
• /
• 2009

The objective of this investigation was to develop a gastro-retentive(GR) dosage form of gabapentin and was to evaluate of its dissolution characteristics. GR tablet consists of expandable core tablet matrix and semi-permeable membrane coating. Poloxamer 407 and sodium bicarbonate were used to prepare the core matrix. Polyvinly acetate dispersion (Kollicoat $SR30D^{(R)}$) and polyvinyl alcohol-polyethylene glycol copolymer ((Kollicoat $IR^{(R)}$)) were employed to form the semi-permeable membrane. The GR tablets significantly expanded up to fivefold in simulated gastrointestinal fluids with no apparent damage of the coating membrane over 12 hours. Also, the swelling rate was controllable with the amount of sodium bicarbonate. The drug release was observed to be substantially sustained based on coating level. The release rate of gabapentin from the GR tablet was gradually slowed down as the coasting amount was increased. The gabapentin GR tablet with 8% coating level showed a pseudo-zero order release kinetics over 12 hours. These results suggest that this swellable GR tablet system having semi-permeable membrane coating can be applicable for hydrophilic drug substances like gabapentin.

• Journal of Pharmaceutical Investigation
• /
• v.32 no.1
• /
• pp.1-6
• /
• 2002

The mucoadhesive characteristics of [P(AA-co-PEGMM)] films by estimating the glass transition temperature $(T_g)$, analyzing surface energy and studying FT-IR was previously reported. In this study, the possibility of buccal mucoadhesive dosage form of [P(AA-co-PEGMM)] films by mucoadhesive force measurements and dissolution tests were also investigated. Mucoadhesiveness of [P(AA-co-PEGMM)] films was compared with cr-PAA and cr-PEGMM films crosslinked with 3% ethyleneglycol dimethacrylate (EGDMA). The buccal mucoadhesive force of [P(AA-co-PEGMM)] films increased with increasing content of PEGMM. [P{AA-co-PEGMM (18 mole%)}] films showed a significantly greater mucoadhesiveness than cr-PAA and cr-PEGMM films. The mucoadhesive force measured in normal saline (pH 5.0) was higher than that measured in phosphate buffer (pH 6.8) because of the pH dependence of hydrogels with carboxyl ions within the PAA. Moreover, the mucoadhesive force of [P{AA-co-PEGMM (18 mole%)}] films was at maximum after 2 hr attachment of buccal mocosa and it was maintained over $1\;N/cm^2$ for up to 10 hr. In dissolution studies, the release of butorphanol tartrate from [P(AA-co-PEGMM)] films increased with increasing PEGMM content, and films prepared with 18 mole% PEGMM gave almost zero order release kinetics.

• Korean Journal of Metals and Materials
• /
• v.49 no.12
• /
• pp.917-923
• /
• 2011

Dissolution and precipitation behaviors of complex carbonitrides in austenite of a V-Nb microalloyed steel were quantitatively examined through electrical resistivity measurement and transmission electron microscopy. The electrical resistivity increased with solution treatment temperature up to $1240^{\circ}C$ and then was saturated at $225n{\Omega}m$ for a holding time of 10 min. The electrical resistivity method was also used to quantitatively measure the isothermal precipitation kinetics of the complex carbonitrides in austenite. Nb-rich precipitates were observed in austenite at the early stages of precipitation, but Nb was replaced by V up to the equilibrium amount within the precipitates with further holding time. The time-temperature-precipitation diagram showed a C-type curve; nose temperature and its incubation time were $900^{\circ}C$ and 100 s, respectively.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.7
• /
• pp.2451-2458
• /
• 2010

We prepared sustained release matrix system which contains carvedilol with Compritol 888 ATO used as lipophilic sustained release excipient and hydroxypropyl methyl cellulose (HPMC) or polyethylene oxide (PEO) used as hydrophilic sustained release polymer. Wet granulation compressed method was used for preparing carvedilol sustained release matrix tablets. When carvedilol sustained release matrix tablets were prepared, we evaluated the drug release kinetics which is affected by Compritol 888 ATO ratio, a kind of hydrophilic polymer (HPMC, PEO) and hot melt coating coagglutination (HMCC) process was done. The drug release kinetics was measured for 24 hours in pH 1.2 simulated gastric fluid and pH 6.8 simulated intestinal fluid, using a dissolution tester at $37.5^{\circ}C$ in 50 rpm. Dissolution rate of controlled release matrix tablets of carvedilol was evaluated by paddle method. We confirmed that HMCC process was very effective to controlled release of drugs. The rate of Compritol 888 ATO, as a lipidic material, can control the drug release pattern about the elution rate of 95% and 24 hours delay than that of the normal tablet.

• Journal of Soil and Groundwater Environment
• /
• v.11 no.1
• /
• pp.23-36
• /
• 2006

Experimental leaching of tailings was performed as a function of times (1, 2, 4, 7, 14, 21 and 30 days) in the laboratory using reaction solutions equilibrated to three different pH set-points (pHs 1,3 and 5). The initial pHs of 5 and 3 stabilized at either 4.6-6.1 or 2.8-3.5 in 2 days and decrease gradually with time afterwards. The results of the leaching tests indicate that the significant increase in the sulfate concentrations and in acidity after 7 days of leaching results from the oxidation of sulfide minerals. There were no significant variations in the extractable Pb found in the leach solutions of pH 5 and 3 within the reaction time (1-30 days), while Zn, Cd and Cu concentrations tend to significantly increase with time. In tailings leaching at an initial pH=1, two trends were observed: i) The 'Zn-type' (Zn, Cd and Cu), with increasing concentrations between days 1 and 30, corresponding to the expected trend when continuous dissolution is the dominant process, ii) the 'Pb-type' (Pb), with decreasing concentrations over time, suggesting rapid dissolution of a Pb source followed by the precipitation of 'anglesite' in relation to the large increase in dissolved sulfates. The high sulfate concentrations were coupled with high concentrations of released Fe, Zn and Cd. Release of Zn and Cd and acidity from these leaching experiments can potentially pose adverse impact to surface and groundwater qualities in the surrounding environment. The kinetic problems could be the important factor which leads to increasing concentrations of trace metals in the runoff water.

• Journal of the Microelectronics and Packaging Society
• /
• v.15 no.3
• /
• pp.41-46
• /
• 2008

Etching kinetics of $EAGLE^{2000TM}$ LCD glass was investigated using 2.5MHF-xMHCl$(x:0\sim8)$ acid mixtures. It was concluded that the reaction of HF-containing solutions with the glass was the rate-determining step for the dissolution process when considering following observations; the value of the activation energy $35\sim45$ kJ/mol and insensitivity of the dissolution rate to the etching time and the moving velocity of the glass into the solution. The etching rate linearly increased with increasing the HCl concentration in the etchant. It was also observed that the etched surface was as smooth as the original surface by addition of HCl and increase in etching temperature. This is due to the catalytic role of the $H_{3}O^{+]$ ions in the dissolution process.

• YAKHAK HOEJI
• /
• v.38 no.3
• /
• pp.250-264
• /
• 1994

Omeprazole(OMZ)-cholestyramine(CHL) and various OMZ-Dowex resin complexes were prepared by reaction between OMZ and activated resins in 0.1N NaOH solution. And their physical properties were tested by means of infrared(IR), differential scaning caloimeter(DSC), X-ray diffraction. Chemical stability of OMZ-CHL was increased markedly compared with OMZ and the decomposition of OMZ-CHL followed the pseudo first-order kinetics and the rate constants were $2.743{\times}10^{-4}/day$ at $20^{\circ}C$, $7.83{\times}10^{-3}day^{-1}$ under 80% RH and $1.68{\times}10^{-2}day^{-1}$ under UV radiation, respectively. On the other hand, the rate constants of OMZ were $2.996{\times}10^{-4}day^{-1}$ at $20^{\circ}C$, $1.17{\times}10^{-2}day^{-1}$ under 85% RH, and $4.07{\times}10^{-2}day^{-1}$ under UV radiation, respectively. The rates of dissolution of OMZ-CHL bulk and OMZ-CHL tablet were 100% and more than 85% in 15 minutes, respectively, which were increased than OMZ base and OMZ-tablet. In the acute toxicological test, the value of oral $LD_{50}$(mouse) was 4.608 g/kg. OMZ-CHL was pelletized using lactose, polyethyle neglycol(PEG), D-sorbitol, Avicel PH 101, sodium laurylsulfate and polyvinylpyrrolidone(PVP) K-30, and enteric coated with HPMCP, Myvacet, acetone, ethanol and cetanol, of which dissolution rate was found to be more than 85% in 10 minutes. From the above results, it was found that OMZ-CHL is a useful means for development of new oral dosage forms of OMZ.