• Journal of the Korean Society of Marine Environment & Safety
• /
• v.13 no.4
• /
• pp.27-35
• /
• 2007

In order to take measures for solving conflicts between the relevant Ministries of Korean government such as MOMAF(Ministry of Maritime Affairs and Fisheries) and MAF(Ministry of Agriculture and Forestry) and the relevant industry circles such as KSA(Korea Swine Association) and KODA(Korea Ocean Dumping Association) regarding the prohibition of ocean dumping of livestock excreta wastes from land, the present conditions of marine disposal of livestock excreta wastes and the standpoints of MOMAF, MAF, KSA and KODA were reviewed in Korea. As measures for solving the conflicts, the followings were proposed; A prior examination into the possibility of the treatment and/or disposal on shore for the total amount of livestock excreta wastes in Korea, measures for solving civil appeals against the problems arising from the treatment and/or disposal on shore of livestock excreta wastes, a prior examination into the possibility of the execution of the amendments to the relevant rules and regulations of Korean marine pollution prevention law for the prohibition of ocean dumping of livestock excreta wastes, measures for supporting the relevant industry circles such as KSA and KODA which were expected to suffer from the prohibition of ocean dumping, and an overall review of the national system for ocean dumping of terrestrial wastes in nationwide level.

• Tunnel and Underground Space
• /
• v.32 no.1
• /
• pp.1-19
• /
• 2022

In this report, new standard, published by Japanese Geotechnical Society, on in-situ stress measurements by hydraulic fracturing was reviewed. In the standard, modification was made for the calculation of fracture re-opening pressure in consideration of fracture surface roughness and residual aperture. The standard also presents how much the system compliance influences the estimation of the fracture re-opening pressure and subsequent in-situ stresses. It is shown that the stiffer the rock mass is, the system compliance should be sufficiently small enough so as to obtain in-situ stress measurement with higher confidence.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.10 no.1
• /
• pp.123-129
• /
• 2007

A 2-step process for the safe destruction of chemical wafare agents(agent hydrolysis followed by supercritical water oxidation) was studied to obtain kinetic data for the pilot plant design. This process is simple to operate by using commercial equipments and could be applied as an alternative technology to incineration. Sarin(GB) and sulfur mustard(HD) were hydrolysed in sodium hydroxide and water respectively and their hydrolysates and OPA, which is binary agent for GB were oxidized in a continuous flow supercritical water oxidation system. Destruction efficiencies of the materials were above 99.99% in supercritical water.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1993.10a
• /
• pp.1405-1414
• /
• 1993

The purification of sewage deriving from agricultural and food industries is today a serious problem mainly in areas characterized by intensive production plants. The solution examined in this work, involves a system of natural evaporation which employs special panels with a large evaporating surface constituted by an internal cellular structure in polyethilene. Using renewable energy they allow to speed up the natural evaporating effect thus eliminating some drawbacks such as swamps and obtaining sewage concentration with relatively low costs. The institute of agricultural engineering has carried out tests on the disposal of sewage deriving from two very important production sectors; pig-breeding and olive oil production . at a were gathered in order to verify the operating capacity of plants and their variables . On the remaining concentrated part tests were also carried out in order to know its chemical and chemical-physical features and to study the possibility for its us .

• Journal of the Korean Operations Research and Management Science Society
• /
• v.22 no.4
• /
• pp.81-92
• /
• 1997

The terminology such as ecology, environment problems, ecosystems, ecofactory, and others related to environmental problems have been recently used in manufacturing systems, since the modern industries have to consider a global ecological crisis. The indifference of recent environmental problems which may be faced now has been paid attention to all engineering areas. In this paper, manufacturing functional requirements such as disassembly, disposal, disposal, or recycling are considered in the integrated product design development, which have not been considered well in the preliminary design stage. Those functions will contribute to reduce the waste and to long the product life cycle, which also satisfies the business benefits and customer requirements. The concurrent design concepts should be applied to integrate all possible factors. Therefore, few practical concurrent engineering tools are presented in here. The objective of this paper is to develop a called green manufacturing systems for integrated product design development by concurrent design concept which can give the desirable result in product design.

• IE interfaces
• /
• v.11 no.1
• /
• pp.119-129
• /
• 1998

The relative importance of Logistics in steelworks industry is rather higher among other business activities. The objective of the paper is to propose the methodology for real-time vehicle scheduling for scrap disposal in the steelworks industry. Currently, the rule necessary to assign vehicles to a specific job is strictly fixed. The paper adopts the multi-pass rule selector (MPRS) that suggests a promising rule used for vehicle dispatching for a period of time. The MPRS is regularly invoked if necessary and then evaluates a set of rule candidates to select the best rule with respect to the system performance criteria. The experiment shows that the proposed approach outperforms the current single-pass strategy.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2003.11a
• /
• pp.261-265
• /
• 2003

This paper proposes acceptance requirements and the corresponding implementation strategy for the near-surface repository of low- and intermediate-level radioactive wastes. The proposed requirements include details on waste classification and radionuclide concentration limitation and inventory analysis. The strategy considers a relevant linking between predisposal waste management, disposal safety assessment and the overall disposal system.

• Nuclear Engineering and Technology
• /
• v.45 no.1
• /
• pp.41-52
• /
• 2013

Adequate design of engineered barriers, including canister, buffer and backfill, is important for the safe disposal of high-level radioactive waste. Three-dimensional computer simulations were carried out under different condition to examine the thermal and mechanical behavior of engineered barriers and rock mass. The research looked at five areas of importance, the effect of the swelling pressure, water content of buffer, density of compacted bentonite, emplacement type and the selection of failure criteria. The results highlighted the need to consider tensile stress in the outer shell of a canister due to thermal expansion of the canister and the swelling pressure from the buffer for a more reliable design of an underground repository system. In addition, an adequate failure criterion should be used for the buffer and backfill.

• Journal of Korean Institute of Industrial Engineers
• /
• v.22 no.3
• /
• pp.413-426
• /
• 1996

Modern society, as a result of high industrial technology, is characterized by a series of mass production, moss consumption and mass disposal. As the mass disposal is known as the major culprit of destroying ecological system of our environment, human prosperity is in turn threatened by this indiscrete activities. Under current industrial technology which pursuit maximum profit, environmental problems could not be solved. This paper proposes recycle manufacturing systems of assemble products as a measure of current non-recycle manufacturing systems. Products are also composed of a number of ports. All parts are represented by a function of time cost performance variable as reuse level. We develop on information systems which give all the information on reused and recycled parts. We try to implement this result on a real fields. We confide ourselves to the contribution to on effective solution of environmental problems and to give profit to assembly manufacturing and consumers.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2002.11a
• /
• pp.179-182
• /
• 2002

Today, augmentation of industrial wastes with industrial development demands diminution and recycling technical development for industrial wastes reduction. A statistical research of industry and constructional wastes as a request of the times can achieve the conservation of resource and the protection of environment. The ultimate object of the study is not only diminution and recycling of industrial wastes but also the degree of self-sufficiency in resource and the attainment of comfortable life environment, which can the accomplish the resource circulation system and make progress into the environmentally advanced country. The object of this investigation is industrial classification, a waste discharge quantity, a waste sort, waste disposal of industrial wastes in Yeung-nam area. The investigation of special quality in industrial wastes can be used to establish a wastes management policy and a disposition method .