Nuclear Engineering and Technology

Korean Nuclear Society (한국원자력학회)
권호 표지
DOI QR코드

DOI QR Code

AN ANALYSIS OF THE THERMAL AND MECHANICAL BEHAVIOR OF ENGINEERED BARRIERS IN A HIGH-LEVEL RADIOACTIVE WASTE REPOSITORY

  • Kwon, S. (Department of Energy Resources Engineering, Inha University) ;
  • Cho, W.J. (Korea Atomic Energy Research Institute) ;
  • Lee, J.O. (Korea Atomic Energy Research Institute)
  • Received : 2012.02.20
  • Accepted : 2012.07.10
  • Published : 2013.02.25
Download PDF
⟨ Previous Next ⟩

Abstract

Adequate design of engineered barriers, including canister, buffer and backfill, is important for the safe disposal of high-level radioactive waste. Three-dimensional computer simulations were carried out under different condition to examine the thermal and mechanical behavior of engineered barriers and rock mass. The research looked at five areas of importance, the effect of the swelling pressure, water content of buffer, density of compacted bentonite, emplacement type and the selection of failure criteria. The results highlighted the need to consider tensile stress in the outer shell of a canister due to thermal expansion of the canister and the swelling pressure from the buffer for a more reliable design of an underground repository system. In addition, an adequate failure criterion should be used for the buffer and backfill.

Keywords

References

  1. F.Dupray, B.Francois and L.Laloui, "Analysis of the FEBEX multi-barrier system including thermoplasticity of unsaturated bentonite," International Journal for Numerical and Analytical Methods in Geomechanics, doi: 10.1002/nag.1103
  2. O.Karnland, S.Olsson, T.Sanden, B.Falth, M.Jansson, T.E. Eriksen, K.Svardström, B.Rosborg and A.Muurinen, Long term test of buffer material at the Aspo HRL, LOT project, SKB TR-09-31.
  3. E.Alonso and C.Hoffmann, "Modelling the field behaviour of a granular expansive barrier," Physics and Chemistry of the Earth, vol.32, pp.$850^{\circ}(C)865$(2007). https://doi.org/10.1016/j.pce.2006.04.039
  4. J. Lee, D. Cho, H. Choi and J. Choi, "Concept of a Korean reference disposal system for spent fuels," J. Nucl. Sci. Technol., vol.44, 1565-1573 (2007). https://doi.org/10.1080/18811248.2007.9711407
  5. KAERI, "Advanced Nuclear Fuel Cycle," KAERI Newsletter (2008)
  6. J.Yoon and J.Ahn, "A systems assessment for the Korean Advanced nuclear fuel cycle concept from the perspective of radiological impact," Nuclear Engineering and Technology, vol.42, pp.17-36(2009). https://doi.org/10.5516/NET.2010.42.1.017
  7. W.J.Cho, J.O.Lee and C.H.Kang, "A compilation and evaluation of thermal and mechanical properties of bentonitebased buffer materials for a high-level waste repository," J.of the Korean Nuclear Society, vol.34, pp.90-103(2002).
  8. W.J.Cho, J.O.Lee and S.Kwon, "A correlation to predict the thermal conductivity of buffer and backfill material for a high-level waste repository," Tunnel & underground space, vol. 20, pp. 284-291(2010).
  9. J.O.Lee, W.J.Cho and S.Kwon, "Thermal-hydro-mechanical Properties of Reference Bentonite Buffer for a Korean HLW Repository," Tunnel & Underground space, vol. 21, pp. 264-273(2011).
  10. J.O.Lee, W.J.Cho, P.S.Hahn and H.H.Park, "A study on the hydraulic properties of domestic clay/crushed rock mixture for the backfill material in a radioactive waste repository," J.of Korean Nuclear Society, vol.26, pp.54-62(1994).
  11. W.J.Cho, J.O.Lee and C.H.Kang, "Hydraulic conductivity of bentonite-sand mixture for a potential backfill material for a high-level radioactive waste repository," J.of the Korean Nuclear Society, vol.32, pp.495-503(2000).
  12. J.H.Park, J.E.Kuh and S.Kwon, "Thermal analysis of high level radioactive waste repository using a large model," J.of the Korean Nuclear Society, vol.32, pp.244-253(2000).
  13. S.Kwon and J.W.Choi, "Thermo-mechanical Stability Analysis for a Multi-level Radioactive Waste Disposal Concept," Geotechnical and Geological Engineering, vol. 24, pp.361-377(2006). https://doi.org/10.1007/s10706-004-7935-5
  14. J.Kim, Y.K.Koh, D.S.Bae and J.W.Choi, "Depth and layout optimizations of a radioactive waste repository in a discontinuous rock mass based on a thermo-mechanical model," Nuclear engineering and technology, vol.40, pp.429-438 (2008). https://doi.org/10.5516/NET.2008.40.5.429
  15. R.Pusch, "The performance of clay barriers in repositories for high-level radioactive waste," Nuclear Engineering and Technology, vol.38, pp.484-488(2006).
  16. W.J.Cho, J.O.Lee and S.Kwon, "Thermal Conductivity of Compacted Bentonite and Bentonite-Sand Mixture," J. of the Korean Radioactive Waste Society, vol.6(2), pp. 101- 109(2008)
  17. W.J.Cho, J.O.Lee and K.S.Chun, "The temperature effects on hydraulic conductivity on compacted bentonite," Applied Clay Science, vol.14, pp.47-58(1999). https://doi.org/10.1016/S0169-1317(98)00047-7
  18. W.J.Cho, J.O.Lee, C.H.Kang and K.S.Chun, "Physicochemical, mineralogical and mechanical properties of domestic bentonite and bentonite-sand mixture as a buffer material in the high-level waste repository," KAERI/TR- 1388/99(1999).
  19. B.Y.Park, D.S.Bae, C.S.Kim, K.S.Kim and Y.K.Ko, "Evaluation of the basic mechanical and thermal properties of deep crystalline rocks," KAERI/TR-1828/2001(2001).
  20. A.F.Fossum, "Effective elastic properties for a randomly jointed rock mass," Int. J. Rock Mech. Min. Sci., vol.22(6), pp.467-470(1985). https://doi.org/10.1016/0148-9062(85)90011-7
  21. Itasca, FLAC3D user's manual.
  22. SKB, "The Stripa project, Annual report 1985," Swedish Nuclear Fuel and Waste Management Company (SKB), Technical report 86-20 (1986).

Cited by

  1. An assessment of strontium sorption onto bentonite buffer material in waste repository vol.24, pp.9, 2017, https://doi.org/10.1007/s11356-017-8536-1