• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.594-596
• /
• 2009

Amorphous silicon nitride (a-SiNx) passivation film as a passivation layer of TFT-LCDs was deposited by AC-reactive sputtering at low temperature. As a result, the electrical characteristics and reliability of TFT with novel passivation showed the same level as the conventional TFT. Finally, we have developed 47"Full HD IPS TFT-LCDs with sputtered amorphous silicon nitride. It is suitable for low temperature based applications such as OTFT and Flexible display.

• Journal of the Semiconductor & Display Technology
• /
• v.18 no.3
• /
• pp.25-30
• /
• 2019

In this paper, we have analyzed manufacturing problems of the scaffold with pores using FDM 3D printer and PLGA. We suggested the solutions using 3SC practical TRIZ. We selected the final solution used machine learning. We reduced number of experiments using most influential factor after analysis print factors. We printed the scaffold and measured pore size. We created the regression model using python tensorflow. The print condition data of measured pore size was used as training data. We predicted the pore size of printed condition using regression model. We printed the scaffold using the predicted the print condition data. We quantitatively compare the predicted scaffold pore size data and the measured scaffold pore size data. We got satisfactory result.

• Journal of the Ergonomics Society of Korea
• /
• v.9 no.1
• /
• pp.35-42
• /
• 1990

This study is concerned with the accuracy, of error with which subjects can interpolate the location of a target between two graduation markers with 4 orientations and 6 sizes CRT display. Stimuli were graphic images on CRT with a linear, end-markec, ungraduated scales having a target. The location of a target is estimated in units over te range 1-99. Smallest error of estimates was at the near ends and middle of the base-line. The median error was less than 2 units, modal error was 1, and the most error (; 99.7%) was within 10. A proper size to make an minimum error in interpolation exists such that size 400 pixels. Interpolation estimation is shown to be affected by the size, location and interaction (orientation x location, size x location). The accuracy, interpolation performance are discussed in relation to absolute error associated with visual performance.

• Journal of Industrial Technology
• /
• v.9
• /
• pp.67-77
• /
• 1989

This study is concerned with the accuracy, the pattern of error with which subjects can interpolate the location of a pointer or a target between two graduation markers with various size on CRT display. Stimuli were graphic images on CRT with a linear, end-marked, ungraduated scales having a target for t base-line sizes. The location of a target is estimated in units over the range 1-99. Smallest error of estimates was at the near ends and middle of the base-line. The median error was less 2 units, modal error was 1, and most error(;99.6%) was within 10. Subjects had a more tendency to overestimate than to underestimate at the left-part of base-line in all siges, and an opposite tendency at the right-part. A proper size to minimize the interpolation error exists such that size 500. It is suggested that interpolation of fifths and even tenths will give a reguired accuracy for certain situations, and relative location and base-line size has a relevant attribute to interpolate.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.1880-1883
• /
• 1997

An Parallax-Barrier type autostereoscopic display system is implemented to overcome the handicap of current glass-typed stereo imaging system which gives operators unnatural feeling and reluctance. This system is composed of image mixing part of two input images, A/D transformation part, scan conversion part to eliminate the rainbow interference phenomenon, and pin-hole type barrier lens. For the fine display the accurate slit width of barrier is calculated in consideration of retina size, and the samsung 10.4" TFT-LCO was used as flat display monitor.itor.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.4
• /
• pp.47-53
• /
• 2004

미국, 일본 및 유럽을 중심으로 오랫동안 검토가 진행되어 왔던 HDTV(High Definition TV)가 2005년을 본격적인 상용화의 원년으로 하여 각국에서 많은 활동이 이루어지고 있다. HDTV 보급에 있어서, 핵심적인 부문을 차지하고 있는 Display는 지난 백 여년간 그 명맥을 유지하여 오던 CRT(Cathode Ray Tube)가 Display의 Size 및 해상도면에서 그 한계를 드러냄에 따라 그 퇴조를 선언하고, 대체 Device의 출현을 기대하고 있다. 특히 기술 개발의 중심이 되고 있는 플라즈마 디스플레이(PDP, Plasma Display) 및 LCD(Liquid Crystal Display)는 평판 디스플레이로서의 장점으로 차별화 되어 그 발전가능성에 많은 관심을 받고 있으며, 그로 인한 약진이 두각을 나타내고 있다. (중략)

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1753-1756
• /
• 2007

In the field of 3D display, holographic displays are the only technology allowing optimal user comfort. We have developed systems based on compact projection optics, that allow advantageous new features, like large size full-color3D scenes generated at high rate on a micro-display with state of the art resolution.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.798-801
• /
• 2007

For lower power and smaller size with higher image quality, it is desirable to have more units integrated on a display panel. It needs careful design considerations in selecting CMOS, SOP or PCB. An experimental display system is designed and power and delay considering chip area, data rates and bus width are analyzed for all technology combinations to obtain optimum design methodologies.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.467-470
• /
• 2007

Ultrafine Indium tin oxide (ITO) nanoparticle was successfully fabricated by low temperature synthetic method (LTSM). Mean size of ITO nanoparticle is 5 nm, and uniformly dispersed with (222) orientated cubic structure. Using the nanoparticle, ITO thin film with good optical and electrical properties was fabricated by inkjet printing.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1040-1043
• /
• 2009

a-IGZO is an attractive material to make an AMOLED device with uniform TFT properties for use in a large size display. However, this material shows TFT properties that are very sensitive to water or hydrogen. Therefore, it is essential to control these critical factors during fabrication of the backplane in order to improve the TFT performance. In this paper, we report the effect of passivation layer properties on the performance of the oxide TFTs.