• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.423-426
• /
• 2002

New driving waveform which can be inferred by analyzing fundamental LC mechanism is suggested. The main idea of the new waveform is the stabilizing LC layer fast in the cell by controlling the middle director of LC layer. Consequently, we can get not only numerical reduction of optical response merely but also the change of dynamic transmittance from applied voltage exactly

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
• /
• pp.423-425
• /
• 2005

Reflective paper-like display (PLD) using two types of particles having different electric polarity has been developed. A positive-charged particle has $TiO_2$, polymer and charge control agent (CCA), while a negative-charged particle consists of carbon black, polymer and CCA. We achieved fast response time (${\sim}0.2$ msec) and passive matrix driving addressing. These methods can easily be adapted to complete a large area display and flexible display.

• Journal of information and communication convergence engineering
• /
• 제5권3호
• /
• pp.285-288
• /
• 2007

PDP(Plasma Display Panel) driving circuit requires switching devices and capacitors to stand up high voltages over 150volts. Thereby the power consumption and the cost of a PDP driving circuit increase. In this paper, a PDP driving circuit is proposed that can be operated with a lower supply voltage than the supply voltage of conventional driving circuit. The operation of the proposed driving circuit is verified by the computer simulation and experiments. PSPICE simulation and experiments results show that the output signal can drive PDP cells when the supply voltage is higher than 40volts.

• 조명전기설비학회논문지
• /
• 제14권6호
• /
• pp.1-5
• /
• 2000

최근 디지털 텔레비젼전 및 고해상도(High Definition) 텔레비전용 표시장치로 교류형 풀랴즈마 디스플레이가 각광 받고 있다. 상용화되고 있는 교류형 플라즈마 디스플레이의 구조를 보면 3전극행 면방전형(three electrodes surface discharge type)이 주류이다. 재의 효율은 11m/W의 수준으로 본격적인 상용화를 위해서는 효율의 향상이 관건이다. 효율 향상올 위해서는 패널 구조(Panel structure)의 개선도 필요하지만 주어진 구조에서 최대한의 효율을 갖도록하는 구동방법의 최적화가 선결 과제이다. 교류형 플라즈마 디스플레이의 방전 이미지는 연속되는 방전 발광에 의해 이루어 진다. 대부분의 전략 소모는 연속되논 발광을 위한 유지 방전에서 소모되기 때운에 유지방전의 파형의 최적화는 고 방전 효율을 위한 중요한 과제이다. 구동 방식으로서는 ADS(Address and Display period Separated) 구동이라는 방식이 일반적으로 널리 쓰이고 있다. 이 구동법의 평균 유지방전 주파수는 수십 [kHz]이지만 실제 주파수는 100[kHz]에서 200[kHz] 사이의 상당히 높은 값이다. 본 연구 결과에 따르면 형광체가 가시광을 방출시킬 때 형광체 재료의 특성상 감쇄시간(Decay Time)이 수 ms에 이른다. 만약 감쇄 시간이 유지방전 펄스으 주기보다 길다면 방전에서 만들어진 진공자외선(Vacuum Ultra Violet Rav)이 가시광으로 변환애 효과적으로 이용되지 못한다. 결국 발광 효율은 유지방전 주파수에 비례하여 감소한다. 결론적으로 말해 저 주파수 유지 방전으로 발광효율을 크게 개선할 수 있다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(2)
• /
• pp.48-51
• /
• 2000

플라즈마 디스플레이 패널의 발광효율을 개선하기 위하여 sustain 구간의 파형을 변화시킨 새로운 구동파 형을 제안하였다. 제안된 sustain 파형은 기존의 구형파에 기울기를 가진 ramp 형태의 파형을 덧붙여 줌으로써 Self-Erasing을 유도하는 파형이다. 기존에 제안된 Self-Erasing을 이용한 구동방식은 높은 구동주파수(>150kHz)에서만 발광효율이 개선되는 반면, 본 논문에서 제안하는 파형은 낮은 구동주파수(25kHz)에서도 30％정도의 발광효율이 개선되었다. 본 논문의 결과로부터 주파수, 듀티, 기울기 등의 다양한 구동조건에서의 연구가 진행된다면 더 큰 발광효율개선이 기대된다.

• Journal of Information Display
• /
• 제11권4호
• /
• pp.173-181
• /
• 2010

In this paper, light-emitting-diode (LED) backlight driving circuits and dimming method for medium-sized and large liquid crystal displays (LCDs) are proposed. The double loop control method, the intelligent-phase-shifted PWM dimming method, the fast-switching current regulator, and the current matching techniques are proposed to improve not only the current regulation characteristics and the power efficiency but also the current matching characteristics and the transient response of the LED current. The brightness of the backlight using the proposed local dimming method was determined from the histogram of the local block to reduce the power consumption of the backlight without image distortion. The measured maximum power efficiency of the LED backlight driving circuit for medium-sized LCDs was 90%, and the simulation results showed an 88% maximum power efficiency of the LED backlight driving circuit for large LCDs. The maximum backlight power-saving ratio of the proposed dimming method was 41.7% in the simulation with a high-contrast image. The experiment and simulation results showed that the performance of LEDs as LCD backlight units (BLUs) improved with the proposed circuits and method.

• 전자공학회논문지A
• /
• 제31A권7호
• /
• pp.110-116
• /
• 1994

In this paper a Duty Effective Overlap Scanning method (DEOS) for the improvement of driving efficiency of LC displays which have the RMS voltage responding characteristics is proposed and new processing method of data signals for optimum application of this method is also proposed. Proposed method has a few advantages such as the increment of duty ratio the increment of driving power loaded on LC cell and the decrement of RMS voltage error rate caused by signal attenuation on electrodes composing of display when compared with the conventional method which is called as optimum voltage amplitude selection method. And also by adopting new data signal processing method which has 3 kinds of voltage levels additional advantage much improving crosstalk phenomenon which is the most serious problems of simple matrix structured display is obtained. For the characteristic estimation new mathematical representation for new overlap scanning method and data signal processing method are induced and defined. And by the defined formula and simulation the characteristics of the proposed method and the conventional method are compared and analyzed. As a result of estimation this new method being able to optimize the overlap rate of scan signal and using 3 levels of data signals has the characteristic which can improve the driving efficiency of LC displays.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.881-884
• /
• 2003

We propose a new pixel structure for Active Matrix OLED (AMOLED). The proposed pixel structure can display full color images by compensating threshold voltage (Vth) variation of driving TFTs. And we obtain an improved contrast ratio(C/R) of higher than 600:1

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.251-254
• /
• 2004

We developed a novel Fame interpolation method to interpolate a frame between two successive original frames. Using this method, we are able to apply a double-rate driving method instead of an impulse driving method where a black Fame is inserted between two successive original Fames. The double-rate driving method enables improvement to the motion blur of LCDs caused by the characteristics of human vision without reducing the luminosity of the whole screen. Here, we report on the initial model of our frame interpolation method.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2000년도 학술대회논문집
• /
• pp.60-63
• /
• 2000

In this paper, 7-segment was implemented using AC powder EL. ZnS:Cu and BaTiO3 was used as a phosphor and dielectric respectively. The preparation of phosphor and dielectric layer was performed with screen printing. The implemented system of 7-segment was divided as following; EL display, driving circuit, software for driving. The properties of fabricated devices was measured with EL spectrum and brightness.