• 대한토목학회논문집
• /
• 제35권1호
• /
• pp.1-8
• /
• 2015

신재생 에너지 개발에 대한 사회적 요구가 증가하면서 경제성 및 기술 성숙도가 높은 풍력발전이 많은 관심을 받고 있다. 대규모 에너지 생산을 위해 풍력 터빈의 대형화와 해상풍력 단지 개발에 대한 많은 연구가 진행되고 있으며, 운영 및 관리(O&M, Operation and Management) 측면에서의 구조적 안전성 평가 및 유지관리의 중요성 또한 지속적으로 증가하고 있다. 안전성 평가를 위한 여러 항목 중 터빈 상부 즉, 허브 높이에서의 변위는 구조물의 강성에 의해 지배되는 직접적인 지표로, 구조물의 건전상태를 쉽게 평가할 수 있는 지표라 할 수 있다. 그러나 풍력 터빈과 같은 대형 구조물의 변위 측정은 장비의 한계로 직접적으로 측정하기에는 많은 어려움이 따른다. 따라서 이 연구에서는 (1) 경사와 가속도의 동적 계측응답 자료를 융합하여 간접적으로 변위를 추정하는 방법을 제안하고, (2) 제안된 방법을 제원이 공개되어 있는 NREL 5 MW급 풍력 터빈에 적용하여 경사계의 수, 경사계의 잡음 수준 및 계측 주파수에 따른 변위 추정의 정확도를 평가하였으며, 실제 변위 측정을 위한 매개변수 연구를 수행하였다.

• Structural Engineering and Mechanics
• /
• 제48권4호
• /
• pp.547-567
• /
• 2013

Nonlinear behavior of functionally graded material (FGM) plates under thermal loads is investigated here using an efficient sinusoidal shear deformation theory. The displacement field is chosen based on assumptions that the in-plane and transverse displacements consist of bending and shear components, and the shear components of in-plane displacements give rise to the sinusoidal distribution of transverse shear stress through the thickness in such a way that shear stresses vanish on the plate surfaces. Therefore, there is no need to use shear correction factor. Unlike the conventional sinusoidal shear deformation theory, the proposed efficient sinusoidal shear deformation theory contains only four unknowns. The material is graded in the thickness direction and a simple power law based on the rule of mixture is used to estimate the effective material properties. The neutral surface position for such FGM plates is determined and the sinusoidal shear deformation theory based on exact neutral surface position is employed here. There is no stretching-bending coupling effect in the neutral surface-based formulation, and consequently, the governing equations and boundary conditions of functionally graded plates based on neutral surface have the simple forms as those of isotropic plates. The non-linear strain-displacement relations are also taken into consideration. The thermal loads are assumed as uniform, linear and non-linear temperature rises across the thickness direction. Closed-form solutions are presented to calculate the critical buckling temperature, which are useful for engineers in design. Numerical results are presented for the present efficient sinusoidal shear deformation theory, demonstrating its importance and accuracy in comparison to other theories.

• Structural Engineering and Mechanics
• /
• 제48권6호
• /
• pp.879-914
• /
• 2013

In part I of the article, formulation and characteristics of the several well-known structural geometrical nonlinear solution techniques were studied. In the present paper, the efficiencies and capabilities of residual load minimization, normal plane, updated normal plane, cylindrical arc length, work control, residual displacement minimization, generalized displacement control and modified normal flow will be evaluated. To achieve this goal, a comprehensive comparison of these solution methods will be performed. Due to limit page of the article, only the findings of 17 numerical problems, including 2-D and 3-D trusses, 2-D and 3-D frames, and shells, will be presented. Performance of the solution strategies will be considered by doing more than 12500 nonlinear analyses, and conclusions will be drawn based on the outcomes. Most of the mentioned structures have complex nonlinear behavior, including load limit and snap-back points. In this investigation, criteria like number of diverged and complete analyses, the ability of passing load limit and snap-back points, the total number of steps and analysis iterations, the analysis running time and divergence points will be examined. Numerical properties of each problem, like, maximum allowed iteration, divergence tolerance, maximum and minimum size of the load factor, load increment changes and the target point will be selected in such a way that comparison result to be highly reliable. Following this, capabilities and deficiencies of each solution technique will be surveyed in comparison with the other ones, and superior solution schemes will be introduced.

• Smart Structures and Systems
• /
• 제16권4호
• /
• pp.701-723
• /
• 2015

Friction isolators are one of the most important types of bearings used to mitigate damages of earthquakes. The adaptive behavior of these isolators allows them to achieve multiple levels of performances and predictable seismic behavior during different earthquake hazard levels. There are three main types of friction isolators. The first generation with one sliding surface is known as Friction Pendulum System (FPS) isolators. The double concave friction pendulum (DCFP) with two sliding surfaces is an advanced form of FPS, and the third one, with fully adaptive behavior, is named as triple concave friction pendulum (TCFP). The current study has been conducted to investigate and compare seismic responses of these three types of isolators. The structure is idealized as a two-dimensional single degree of freedom (SDOF) resting on isolators. The coupled differential equations of motion are derived and solved using state space formulation. Seismic responses of isolated structures using each one of these isolators are investigated under seven near fault earthquake motions. The peak values of bearing displacement and base shear are studied employing the variation of essential parameters such as superstructure period, effective isolation period and effective damping of isolator. The results demonstrate a more efficient seismic behavior of TCFP isolator comparing to the other types of isolators. This efficiency depends on the selected effective isolation period as well as effective isolation damping. The investigation shows that increasing the effective isolation period or decreasing the effective isolation damping improves the seismic behavior of TCFP compared to the other isolators. The maximum difference in seismic responses, the base shear and the bearing displacement, for the TCFP isolator are calculated 26.8 and 13.4 percent less than the DCFP and FPS in effective isolation damping equal to10%, respectively.

• 한국항공우주학회지
• /
• 제30권2호
• /
• pp.67-74
• /
• 2002

본 논문에서는 18절점 가정 변형률 솔리드 요소를 이용하여, 기계적 물리량과 전기적 물리량이 완전히 연성된 정적 문제를 해석할 수 있는 유한요소 정식화 과정을 유도하였다. 요소 결점의 축방향 변위 자유도 외에 전기 자유도를 추가하여 주어진 변위와 하중에 의해 발생하는 유도전압을 계산할 수 있다. 또한 가정 변형률 요소를 사용함으로써 박판형 구조물을 모델할 때 발생할 수 있는 잠김현상을 해소하였다. 유도된 유한요소 정식을 바탕으로 프로그램을 작성하였으며, 몇가지 수치예제에 적용하여 작성된 코드를 검증하였다. 본 요소를 이용하여, 여러 가지 변수가 THUNDER의 작동변위에 미치는 영향을 분석하였다. 이를 통하여, 특정한 재료와 곡률을 갖출 경우 THUNDER의 작동성능이 향상됨을 확인하였다.

• 한국농공학회논문집
• /
• 제50권2호
• /
• pp.19-26
• /
• 2008

This study has been carried out to investigate the dynamic characteristics of RC slabs. For this purpose, the 20-node solid element has been used to discretize the RC slabs into two parts of concrete and rebar. The material non-linearity considering elasto-visco plastic model and the smeared crack model have been adopted in the finite element formulation. The applied load can handle step load, load intensity of harmonic load, area of distributed load and frequency. The frequency of harmonic load has an significant effect on dynamic behaviour in terms of displacement. As the frequency is increased, the effect of load amplitude is more serious. Especially, if the frequency of harmonic load exceeds 30 Hz, it is noted that the displacement by harmonic load is greater than that by step load. In case of harmonic load, the damping effect shows no certain tendency with respect to frequency of load. In details, the damping is effective when the frequency of harmonic load is 2 Hz, but there is no consistent tendency according to damping ratio. The dynamic response when the frequency of harmonic load is 3 Hz shows same result for undamped case as well as for damped case with 5% damping ratio. It is also noted that we can get the largest deflection for damped case with 1% damping ratio. However, there is not any damping effect when the frequency of harmonic load is greater than 4 Hz.

• 한국지진공학회논문집
• /
• 제3권1호
• /
• pp.41-54
• /
• 1999

비대칭 박벽단면을 갖는 곡선보의 자유진동해석을 수행할 수 있는 유한요소 이론 및 엄밀해를 제시하기 위하여 가상일의 원리를 이용한 3차원 연속체의 운동방정식을 제시한다 박벽단면의 구속된 비틂효과를 고려하는 박벽 곡선보의 변위장을 도입하고 이를 연소체의 운동방정식에 대입하여 단면에 대해 적분함으로써 박벽 곡선보의 운동방정식을 유도한다. 단순지지되고 일축대칭단면을 갖는 박벽 곡선보의 면내 자유진동 모드에 대응하는엄밀해를 산정하였으며 곡선보를 유한요소로 분할하여 요소의 변위장을 요소 변위벡터에 관한 3차의 Hermitian 다항식으로 나타내고 이를 운동방정식에 대입함으로써 탄성강도행렬과 질량 행렬을 유도한다 또한 본 연구에서 얻어진 엄밀해와 곡선보요소를 이용한 유한요소 해석결과를 직선보요소 및 ABAQUS의 쉘요소를 이용하여 얻어진 결과와 비교 검토를 함으로써 본 연구의 타당성을 입증한다.

• 대한토목학회논문집
• /
• 제13권2호
• /
• pp.41-49
• /
• 1993

2차원 곡선보요소를 이용하여 대변형효과 및 탄소성거동을 고려한 유한요소법을 제시한다. Total Lagrangian 방법을 적용하며, 보요소는 평면응력요소로부터 유도된다. 또한, 임의의 단면을 갖는 평면뼈대 구조의 탄소성 해석을 수행하기 위하여 layered approach를 사용한다. 비선형 유한요소해석은 하중증분 또는 변위증분법을 적용한다. 본 연구에서 제안한 보요소의 거동과 정확도를 검증하기 위하여, 다른 문헌의 결과와 본 연구의 결과를 비교 분석한 해석예제를 제시한다.

• 한국전산구조공학회논문집
• /
• 제17권3호
• /
• pp.279-293
• /
• 2004

등방성 혹은 비등방성 적층복합판 및 쉘의 선형 정적 문제와 자유진동 해석이 새로운 변형률 변위 관계가 도입된 개선된 9절점 쉘 요소에 의하여 수행되었다. 그 관계에서 새롭게 추가된 휨 변형률과 변위사이의 관계 항들에 의한 효과는 비틀어진 보 문제에서 검토되었다. 정식화의 전 과정을 통해, 식들의 모든 항들은 자연 좌표계에 기초하고 있다. 가정 자연 변형률 방법이 막 잠김과 전단 잠김 거동을 제거하기 위하여 사용하였다. 적층 복합판 및 쉘의 고유치의 계산을 위해 Lanczos방법을 사용하였고 질량행렬을 구성하기 위하여 Gauss적분법을 사용하였다. 정식화의 유효성을 평가하기 위해 수치 예제를 해석적 해와 비교하였으며, 제시된 결과는 자유진동 조건하에서 적층체의 거동을 이해하는데 유용할 것이다.

• Geomechanics and Engineering
• /
• 제16권3호
• /
• pp.257-271
• /
• 2018

In this paper, the effect of the homogenization models on buckling and free vibration is presented for simply supported functionally graded plates (FGM) resting on elastic foundation. The majority of investigations developed in the last decade, explored the Voigt homogenization model to predict the effective proprieties of functionally graded materials at the macroscopic-scale for FGM mechanical behavior. For this reason, various models have been used to derive the effective proprieties of FGMs and simulate thereby their effects on the buckling and free vibration of FGM plates based on comparative studies that may differ in terms of several parameters. The refined plate theory, as used in this paper, is based on dividing the transverse displacement into both bending and shear components. This leads to a reduction in the number of unknowns and governing equations. Furthermore the present formulation utilizes a sinusoidal variation of displacement field across the thickness, and satisfies the stress-free boundary conditions on the upper and lower surfaces of the plate without requiring any shear correction factor. Equations of motion are derived from Hamilton's principle. Analytical solutions for the buckling and free vibration analysis are obtained for simply supported plates. The obtained results are compared with those predicted by other plate theories. This study shows the sensitivity of the obtained results to different homogenization models and that the results generated may vary considerably from one theory to another. Comprehensive visualization of results is provided. The analysis is relevant to aerospace, nuclear, civil and other structures.