• 한국음향학회지
• /
• 제18권4호
• /
• pp.47-52
• /
• 1999

본 논문에서는 특징 파라미터의 분산과 인식성능에 대한 기여도를 고려하여 각 특징 파라미터를 가중시키는 방법을 제안하였다. 각 특징 파라미터의 인식률에 비례하게 전체 기여도를 설정하고, 각 특징 파라미터의 분산에 따라 가중요인을 설정하였다. 전체 기여도와 분산에 따른 가중요인을 사용하여 각 특징 파라미터의 상태별 가중치를 설정하였다. 제안한 방법의 유효성을 살펴보기 위해 유사음소 단위의 HMM 음성인식시스템을 사용하여 인식실험을 하였다. 인식실험에서 제안한 방법으로 가중치를 설정하였을 경우에 인식률이 7.7% 향상됨을 볼 수 있었다.

• 한국산학기술학회논문지
• /
• 제15권9호
• /
• pp.5585-5593
• /
• 2014

본 연구는 기대 교통사고건수 추정을 위해 사용되는 SPF의 이질적 분산계수의 유의성이 이질적 사전분포에 직접적인 영향을 받는다는 가설을 검증하고, 이질적 사전분포에 대한 모형 오설정이 교통 안전개선 사업의 평가결과에 주는 영향의 특성을 분석하기 위해 수행되었다. 구체적으로 본 연구에서는 이질적 분산계수의 유의성과 이질적 사전분포의 연관성을 검증하기 위해 모의실험을 통해 이질적 사전분포를 발생시킨 후 이를 NB모형과 HNB모형을 이용하여 SPF를 추정하여 이질적 과분산계수가 SPF의 평균함수 및 분산함수에 주는 영향을 분석하였다. 또한 추정된 계수추정치를 이용한 사전분포의 초모수 추정치의 오차특성과 이질적 과분산계수를 고려하지 않았을 경우 발생하는 교통사고감소계수(CRF)의 오차 부호와 크기를 상세 분석하여 제시하였다. 모의실험 자료 분석결과 이질적 분산계수의 오추정은 포아송 사전분포의 평균에는 큰 영향을 주지 않으나 분산의 크기를 변화시켜 궁극적으로는 기대교통사고건수의 추정량인 사후평균의 값에 오차를 발생시킬 수 있으며, 구체적으로 이질적 분산함수를 NB모형으로 오설정할 경우 CRF의 값은 참값에 비해 최대 120%의 오차를 발생시키는 것으로 나타났다.

• 한국통신학회논문지
• /
• 제31권11A호
• /
• pp.1044-1052
• /
• 2006

In this paper the optimum position of optical phase conjugator (OPC) and the optimal dispersion coefficients of filler sections in WDM system with the conventional mid-span spectral inversion (MSSI) are numerically induced and then applied into $16{\times}40$ Gbps WDM systems with 1,000km non zero - dispersion shifted fiber(NZ-DSF) in order to efficiently compensate for the distorted overall channels. It is confirmed that the compensation extents of overall WDM channels are more improved by applying the induced optimal parameters into WDM system than those in WDM system with the conventional MSSI. So it is expected to alternate with the forming method of the symmetrical distributions of power and local dispersion by applying these optimal parameters into the real WDM system, which generate a serious problem of applying the OPC into multi-channels WDM system if it is not formed. It is also confirmed that two optimal parameters depend on each other, but less related with the finding procedure. And, it will be possible to realize the flexible system design by applying the methods proposed in this paper into the real WDM system with OPC.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.413-414
• /
• 2006

The effects of several experimental parameters on the formation of stable Ni nanoparticles dispersion were investigated. The suspensions of Ni nanoparticles were produced in organic solvents using Hypermer KD-2 as a dispersant. The transmission profiles, particle size distribution, zeta potential, and visual inspection results were used to discuss the stability of the dispersion. The optimal conditions for the formation of stable dispersion are evaluated.

• 전자공학회논문지A
• /
• 제32A권8호
• /
• pp.140-152
• /
• 1995

Derived was the scalar wave equation of optical fibers. Based on the derived equation, the dispersion characteristics of arbitrarily profiled fibers were analyzed. We applied the 1-D FEM employing quadratic interpolation fucntions to solve the scalar wave equation. To find the optimum index distribution of a fiber that has the ultra-low total dispersion, we analyzed QC fibers as objects. Adding 2$_{nd}$ and 3$_{rd}$ clads to DC fiber, we investigated the change of dispersion characteristics. We found the QC fiber parameters for which the dispersion was ultra-low flattened, less than 0.5 ps/km.nm for ${\lambda}=1.4~1.6{\mu}m$, and the dispersion value was as low as 0.20 ps/km.nm at ${\lambda}=1.55{\mu}m$.

• Journal of information and communication convergence engineering
• /
• 제7권3호
• /
• pp.372-376
• /
• 2009

In this paper, new and simple optical transmission link with fixed dispersion management (DM) scheme, i.e., pre(post) compensation and residual dispersion per span (RDPS) are fixed to net residual dispersion (NRD) = 0 ps/nm, and optical phase conjugator (OPC) having optimal position depending on launch power in WDM transmission system is proposed. Also, effective launch power range of WDM channels resulting 1 dB eye opening penalty (EOP) is induced as a function of OPC position. First, it is confirmed that, for applying DM into WDM transmission link fixed pre(post)compensation and RDPS, which are independence on exact system parameters except launch power, sufficiently are used in WDM links, but OPC with optimal position is needed for effective compensating impairments of WDM channels. And, it is confirmed that effective launch power is broader in case of RDPS = 100 ps/nm than in RDPS = 50 ps/nm. But, it is shown that the best OPC position offset is -0.6 km from a point of view of power window, which is defined as difference between maximum and minimum effective launch power.

• Nuclear Engineering and Technology
• /
• 제53권7호
• /
• pp.2377-2386
• /
• 2021

To model the atmospheric dispersion of radionuclides released from nuclear accident is very important for nuclear emergency. But the uncertainty of model parameters, such as source term and meteorological data, may significantly affect the prediction accuracy. Data assimilation (DA) is usually used to improve the model prediction with the measurements. The paper proposed a parameter bias transformation method combined with Lagrangian puff model to perform DA. The method uses the transformation of coordinates to approximate the effect of parameters bias. The uncertainty of four model parameters is considered in the paper: release rate, wind speed, wind direction and plume height. And particle swarm optimization is used for searching the optimal parameters. Twin experiment and Kincaid experiment are used to evaluate the performance of the proposed method. The results show that the proposed method can effectively increase the reliability of model prediction and estimate the parameters. It has the advantage of clear concept and simple calculation. It will be useful for improving the result of atmospheric dispersion model at the early stage of nuclear emergency.

• Journal of applied mathematics & informatics
• /
• 제35권3_4호
• /
• pp.241-260
• /
• 2017

An analysis is made to study the solute transport in a Casson fluid flow through an annulus in presence of oscillatory flow field and determine how this flow influence the solute dispersion along the annular region. Axial dispersion coefficient and the mean concentration expressions are calculated using the generalized dispersion model. Dispersion coefficient in oscillatory flow is found to be a function of frequency parameter, Schmidt number, and the pressure fluctuation component besides its dependency on yield stress of the fluid, annular gap and time in the case of steady flow. Due to the oscillatory nature of the flow, the dispersion coefficient changes cyclically and the amplitude and magnitude of the dispersion increases initially with time and reaches a non - transient state after a certain critical time. This critical value varies with frequency parameter and independent of the other parameters. It is found that the presence of inner cylinder and increase in the size of the inner cylinder inhibits the dispersion process. This model may be used in understanding the dispersion phenomenon in cardiovascular flows and in particular in catheterized arteries.

• 한국통신학회논문지
• /
• 제13권6호
• /
• pp.462-469
• /
• 1988

단일 모드 광섬유의 색분산은 단일 모드 광전송 시스템의 최대전송속도를 제한한다. 이 연구에서는 개별 단일 모드 광섬유의 색분산 및 분산 파라미터로부터 연쇄 접속된 단일 모드 광섬유의 색분산 및 분산 파라미터를 이론적으로 계산하고, 이중 복조법에 의한 측정결과와 비교한다. 계산결과는 측정결과와 거의 일치하며, 영분산파장의 표준편차는 0.77~1.28nm 분산경도는 표준편차는 0.56~0.75PS/km.nm2이며, 영문산 파장의 표준편차는 광섬유의 길이에 반비례함을 확인하였다.

• 한국환경과학회지
• /
• 제1권1호
• /
• pp.35-43
• /
• 1992

Handling the emergency problems such as Chemobyl accident require real time prediction of pollutants dispersion. One-point real time sounding at pollutant source and simple model including turbulent-radiation process are very important to predict dispersion at real time. The stability categories obtained by one-dimensional numerical model (including PBL dynamics and radiative process) are good agreement with observational data (Golder, 1972). Therefore, the meteorological parameters (thermal, moisture and momentum fluxes; sensible and latent heat; Monin-Obukhov length and bulk Richardson number; vertical diffusion coefficient and TKE; mixing height) calculated by this model will be useful to understand the structure of stable boundary layer and to handling the emergency problems such as dangerous gasses accident. Especially, this simple model has strong merit for practical dispersion models which require turbulence process but does not takes long time to real predictions. According to the results of this model, the urban area has stronger vertical dispersion and weaker horizontal dispersion than rural area during daytime in summer season. The maximum stability class of urban area and rural area are "A" and "B" at 14 LST, respectively. After 20 LST, both urban and rural area have weak vertical dispersion, but they have strong horizontal dispersion. Generally, the urban area have larger radius of horizontal dispersion than rural area. Considering the resolution and time consuming problems of three dimensional grid model, one-dimensional model with one-point real sounding have strong merit for practical dispersion model.al dispersion model.