• Journal of Surface Science and Engineering
• /
• v.40 no.2
• /
• pp.63-69
• /
• 2007

Ni-SiC composite coating layers were formed using two kinds of SiC nano-particles by DC electrodeposition in a nickel sulfamate bath containing SiC particles. The effect of stirring rate and SiC particle type on the microstructure and properties of Ni-SiC composite coating layers were investigated. Results revealed that the trend of deposition rate is closely related to the codeposition of SiC and the deposition rate. or nickel, and the codeposition behavior of SiC can be explained by using hydrodynamic effect due to stirring. The average roughness and friction coefficient are closely related to the codeposition of SiC and SiC particle size. It was found that the Victors microhardness of the composite coating layers increased with increasing codeposition of SiC. The composite coating layers containing smaller SiC particle showed higher hardness. This can be explained by using the strengthening mechanism resulting from dispersion hardening. Anti-wear property of the composite coating layers formed using 130 nm-sized SiC nano-particles has been improved by 2,300% compared with pure electroplated-nickel layer.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.133-134
• /
• 2006

In contrast to paints, the surface appearance of adhesive materials is of minor importance, because the adhesive is invisible between the two substrates. Therefore, the rheological properties needed to apply an adhesive dispersion by spray coating can be quite different. The influence of three different kinds of thickeners on the spraying behaviour of polyurethane adhesive dispersions was investigated. The associative thickener showed only minor changes, whereas the higher molecular weight soluble thickeners dramatically changed the spraying angle and the amount of overspray. Determination of the elongational viscosity by means of the CaBER rheometer proved to be of limited use for thickened dispersions.

• Structural Engineering and Mechanics
• /
• v.57 no.4
• /
• pp.703-716
• /
• 2016

In this paper, we have investigated shear horizontal wave propagation in a layered structure, consisting of granular macromorphic rock (Dionysos Marble) substrate underlying a viscoelastic layer of finite thickness. SH waves characteristics are affected by the material properties of both substrate and the coating. The effects of microstructural parameter "characteristic length" of the substrate, along with heterogeneity, internal friction and thickness of viscoelastic layer are studied on the dispersion curves. Dispersion equation for SH wave is derived. Real and damping phase velocities of SH waves are studied against dimensionless wave number, for different combinations of various parameters involved in the problem.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.381-382
• /
• 2008

$TiO_2$ colloidal solution was electrosprayed for preparing a conductive thin film with high quality. Electrospray is a technique of liquid dispersion electrically and a good method of manufacturing nanoparticle, nanofiber, porous membrane, film preparation and coating. Water and ethanol were used as solvents and their mixing ratio was varied for studying the influence of solvent volatile on nanoparticle dispersion. Various nozzles to control the thru-put of solutions.were examined. Integrated analytical method and scanning electron microscope were used to analyze integrity and microscopic images.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.4
• /
• pp.1235-1241
• /
• 2012

Aluminium (Al)-doped zinc oxide (AZO) thin films with different Al concentrations were prepared by the solgel spin-coating method. Optical parameters such as the optical band gap, absorption coefficient, refractive index, dispersion parameter, and optical conductivity were studied in order to investigate the effects of the Al concentration on the optical properties of AZO thin films. The dispersion energy, single-oscillator energy, average oscillator wavelength, average oscillator strength, and refractive index at infinite wavelength of the AZO thin films were found to be affected by Al incorporation. The optical conductivity of the AZO thin films also increases with increasing photon energy.

• The Korean Journal of Ceramics
• /
• v.5 no.2
• /
• pp.115-118
• /
• 1999

Carbon composites with $MoSi_2$ dispersion were prepared by hot-pressing at $1700^{\circ}C$ under 30 MPa for 1 h using polysilazance as binding material. The composites consisted of C, $Mo_{4.8}Si_3C_{0.6}$ and SiC. Bulk density and porosity of the carbon composites with 10 vol% $MoSi_2$ was 1.8g.$\textrm{cm}^{-3}$ and 34%, respectively. This composite was oxidized about 0.05mm from the surface of the carbon composite after oxidation test at $1500^{\circ}C$ for 10h in air. Formation of the $SiO_2$ glass layer was observed by SEM. When this composite suffered damage in the coating layer, it had hardly farther oxidation because of its self-repairing property. The composite prepared in this study indicated good oxidation resistance.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2020.11a
• /
• pp.137-138
• /
• 2020

The purpose of this study is to evaluate the absorption ratio reduction of recycled coarse aggregate for concrete coated by polymer dispersions. The surface of recycled coarse aggregate is treated by polymer dispersion such as SBR and SAE with solid contents of 2%, 5% and 10%. From the test results, The minimum absorption ratio of the coated recycled coarse aggregate is 1.60 times smaller than that of uncoated recycle coarse aggregate. It is apparent that the absorption ratio of recycled coarse aggregate is much more improved by surface coating with polymer dispersions.

• Journal of the Korean Applied Science and Technology
• /
• v.31 no.4
• /
• pp.711-718
• /
• 2014

In this paper, the mechanical property change was investigated by adding 1,4-butanediol as chain extender of polyurethane dispersion for leather coating. Reagents for the synthesis were polypropylene glycol(PPG), isoporon diisocyanate(IPDI), dimethylolpropionic acid(DMPA) and 1,4-BD. All samples showed good solvent resistance and flexibility by different content of the 1,4-BD. As results, samples which contains a lot of 1,4-BD showed good properties whth strength of $1.80kg_f/mm^2$ and abrasion test measurement of 49.54 mg.loss. According to elongation test, the sample which contains low amount of 1,4-BD was good property as 364 %.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.39 no.1 s.119
• /
• pp.25-29
• /
• 2007

Print mottle is the spotty and cloudy appearance of the ink on the substrate. Print mottle is influenced significantly by the characteristics of the paper with regard to homogeneity of its structure and its coating. The print mottle can be counteracted, in particular by altering the absorption characteristics of the inks, by changing sequence in which the inks are printed, or by using a advanced coated paper. In this study, we investigated the effect of ink dispersion to the print mottle through trial printing test and also analyzed the correlation between properties of coated paper and subjective results by statistic method. The result of this study is expected to be applied the basic data to solve the problem of printing mottle.

• Korean Journal of Materials Research
• /
• v.29 no.4
• /
• pp.221-227
• /
• 2019

This study examines the role of the nano- and micro-particle ratio in dispersion stability and mechanical properties of composite resins for SLA(stereolithography) 3D printing technology. VTES(vinyltriethoxysilane)-coated $ZrO_2$ ceramic particles with different nano- and micro-particle ratios are prepared by a hydrolysis and condensation reaction and then dispersed in commercial photopolymer (High-temp) based on interpenetrating networks(IPNs). The coating characteristics of VTES-coated $ZrO_2$ particles are observed by FE-TEM and FT-IR. The rheological properties of VTES-coated $ZrO_2/High-temp$ composite solution with different particle ratios are investigated by rheometer, and the dispersion properties of the composite solution are confirmed by relaxation NMR and Turbiscan. The mechanical properties of 3D-printed objects are measured by a tensile test and nanoindenter. To investigate the aggregation and dispersion properties of VTES-coated $ZrO_2$ ceramic particles with different particle ratios, we observe the cross-sectional images of 3D printed objects using FE-SEM. The 3D printed objects of the composite solution with nano-particles of 80 % demonstrate improved mechanical characteristics.