• Advances in Energy Research
• /
• 제3권2호
• /
• pp.81-95
• /
• 2015

Microgrid, which can be considered as an integration of various dispersed resources (DRs), is characterized by number of DRs interfaced through the power electronics converters. The microgrid comprising these DRs is often operated in an islanded mode. To minimize the cost, reduce complexity and increase reliability, it is preferred to avoid any communication channel between them. Consequently, the droop control method is traditionally adopted to distribute active and reactive power among the DRs operating in parallel. However, the accuracy of distribution of active and reactive power among the DRs controlled by the conventional droop control approach is highly dependent on the value of line impedance, R/X i.e., resistance to reactance ratio of the line, voltage setting of inverters etc. The limitations of the conventional droop control approach are demonstrated and a modified droop control approach to reduce the effect of impedance mis-match and improve the time response is proposed. The error in reactive power sharing is minimized by inserting virtual impedance in line with the inverters to remove the mis-match in impedance. The improved time response is achieved by modifying the real-power frequency droop using arctan function. Simulations results are presented to validate the effectiveness of the control approach.

• 한국수산과학회지
• /
• 제29권1호
• /
• pp.107-114
• /
• 1996

우리나라 연안에 분포되어 있는 주요 어업대상어종의 자원량을 측정하기 위한 기초자료를 얻기 위하여 남해동부연안에 분포하는 멸치어군을 대상으로 Split beam 어군탐지기를 이용하여 in situ TS를 측정한 결과를 요약하면 다음과 같다. 1. 본 조사에서 어획물의 $95\%$가 멸치였으며, 그 체장빈도 분포는 체장범위 $13.6\~15.4cm$, 평균체장 14.4cm이었고, 체중빈도 분포는 체중범위 $16\~28g$ 평균체중 21.9 g이었다. 2. 멸치의 반사강도는 수심 $10\~30m$ 에서 $-40.7\~-69.2dB,\;30\~50m$, 수층에서 $-42.2\~-67.7dB,\;10\~50m$ 수층에서 $-42.2\~-67.7dB$의 범위였고, 그 빈도분포에는 2개의 mode가 명확하게 분리되어 나타났다. 3. 멸치의 평균반사강도는 -49.7 dB/fish 및 -33.1 dB/kg 이었으며, $90\%$ 신뢰구간은 1 dB 이하였다. 또한, 멸치의 반사강도 (TS)와 체장 (cm)과의 관계는 다음과 같았다. TS=20 log L-72.9.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.151-151
• /
• 2012

A new plasma process, i.e., the combination of PIII&D and HIPIMS, was developed to implant non-gaseous ions into materials surface. HIPIMS is a special mode of operation of pulsed-DC magnetron sputtering, in which high pulsed DC power exceeding ~1 kW/$cm^2$ of its peak power density is applied to the magnetron sputtering target while the average power density remains manageable to the cooling capacity of the equipment by using a very small duty ratio of operation. Due to the high peak power density applied to the sputtering target, a large fraction of sputtered atoms is ionized. If the negative high voltage pulse applied to the sample stage in PIII&D system is synchronized with the pulsed plasma of sputtered target material by HIPIMS operation, the implantation of non-gaseous ions can be successfully accomplished. The new process has great advantage that thin film deposition and non-gaseous ion implantation along with in-situ film modification can be achieved in a single plasma chamber. Even broader application areas of PIII&D technology are believed to be envisaged by this newly developed process. In one application of non-gaseous plasma immersion ion implantation, Ge ions were implanted into SiO2 thin film at 60 keV to form Ge quantum dots embedded in SiO2 dielectric material. The crystalline Ge quantum dots were shown to be 5~10 nm in size and well dispersed in SiO2 matrix. In another application, Ag ions were implanted into SS-304 substrate to endow the anti-microbial property of the surface. Yet another bio-application was Mg ion implantation into Ti to improve its osteointegration property for bone implants. Catalyst is another promising application field of nongaseous plasma immersion ion implantation because ion implantation results in atomically dispersed catalytic agents with high surface to volume ratio. Pt ions were implanted into the surface of Al2O3 catalytic supporter and its H2 generation property was measured for DME reforming catalyst. In this talk, a newly developed, non-gaseous plasma immersion ion implantation technique and its applications would be shown and discussed.

• 식물조직배양학회지
• /
• 제24권2호
• /
• pp.113-117
• /
• 1997

Simple sequence repeats (SSR)는 진핵생물체에 널리 산재되어 있으며, 큰 다형현상을 나타내고, polymerase chain reaction (PCR)으로 쉽게 분석된다. 이 연구의 목적은 서로 다른 Chlamydomonas reinhardtii계통간의 다형현상과 Chlamydomonas의 SSR 좌위에서의 유전양상을 결정하는데 있었다. C. reinhardtii의 genomic DNA library를 만들어 $^{32}$P로 라벨링한 (AC)$_{11}$ probe를 이용하여 (CA/GT)n 반복서열을 가지는 clone을 선택하기위해 screen하였다. 선택된 clone을 sequencing하여 (CA/GT)n sequence에 인접한 PCR primer set를 제조하였다. PCR은 여러 C. reinhardtii 계통의 SSR 좌위를 증폭하기 위하여 사용하였다. 그 좌위는 및몇 C. reinhardtii 계통에서 다형현상을 보였다. 그러나 그 좌위에서 C. reinhardtii의 6계통중 4계통만 DNA가 PCR 증폭을 하였고 2계통은 증폭을 하지 않았다. C. reinhardtii와 C. smithii의 교배로 생긴 4배체에서 2:2의 분리비를 보여주었는데, 이는 단순한 멘델의 유전양상을 나타낸다. 이러한 결과로 미루어 SSR 다형현상은 Chlamydomonas의 개체 식별, 개체군 연구, 연쇄 분석, 그리고 유전자 지도 작성을 하는데 유용할 것이다.다.

• 한국농공학회지
• /
• 제34권4호
• /
• pp.69-79
• /
• 1992

To estimate soil behavior and structural characteristics under the conditions of cyclic loading, freezing & thawing and initial state, several testing was performed and obtained following results. 1.After repeated freezing and thawing processes, original soil structure was destroyed and changed to globular structure from honeycomb or tube in its structure types. Also above processes resulted increasing the soil compression strain while decreasing the failure stress in stress-strain relationship and reached the soil structure into the mode of brittle fracture. Under cyclic loading conditions, soil cluster which was originally dispersed structure colloided with each other, seperated, and finally the soil failed due to the effect of overcompaction. 2.Through the stabilization processes seperated by four steps, the structure of soil skeleton was changed to quite different globular type. The degree of compressibility of soil was decreased in the normally consolidated zone, while the strength against external load increased due to soil particle stabilization. 3.Soil stress-strain chracteristics were largely influenced by repeated up and down processes of temperature. The maximum deformation was obtained in the case of temperature between 0 10˚C by the reseon of particle cluster reformation. 4.Soil compressibility was largely influenced by the optimum moisture content. Under freezing process, swelling could be found and its magnitude was proportional to the density of soil. 5.Density of soil was decreased as increasing the number or repeated freezing and thawing processes and the largest decreasing rate was found at the first turning point from freezing to thawing cycle.

• 마이크로전자및패키징학회지
• /
• 제21권4호
• /
• pp.133-137
• /
• 2014

직경 수 마이크론급의 Ag 코팅 Cu 플레이크를 제조하기 위한 선행공정으로 습식 화학적 합성법으로 제조된 서브마이크론급의 Cu 입자를 볼 밀링 공정을 통해 프레이크화 하였다. 입자들의 산화 및 응집을 막기 위해 볼 밀링 유체로는 에틸렌글리콜을 사용하였고, 에틸아세테이트 표면개질제도 첨가하였다. 용기의 회전수에 따른 실험 결과를 통해 회전수에 따른 회전 모드의 변화가 밀링 후 Cu 입자들의 평균적인 형상과 형상 균일도를 크게 변화시킴을 확인할 수 있었다. 또한 첨가한 지르코니아 볼의 직경 역시 Cu 입자들의 플레이크화 균일도를 결정하는 대표 공정변수임을 확인할 수 있었다. 그 결과 다소간의 응집체를 포함한 서브마이크론급의 Cu 입자를 사용했음에도 불구하고, 회전수, 표면개질제 첨가량, 그리고 지르코니아 볼의 직경 등의 대표 공정변수들을 최적화한 볼 밀링 공정을 통해 분산성이 우수한 수 마이크론급의 Cu 플레이크를 성공적으로 제조할 수 있었다.

• 한국환경보건학회지
• /
• 제43권3호
• /
• pp.185-193
• /
• 2017

Objectives: An on-site study was conducted in order to quantify indoor exposure levels and the emission rate of particulate matter for domestic poultry buildings. Materials and methods: Three types of poultry building (caged layer house, broiler house, and layer house with manure belt) as classified by mode of manure treatment and ventilation were investigated in this study. Nine sites per each poultry building were selected and visited for measuring exposure levels and emission rate of particulate matter. Total dust and respirable dust among the particulate matter were analyzed based on the weight method. Emission rates were estimated by dividing emission amount, which was calculated through multiplying indoor concentration ($mg/m^3$), by the ventilation rate ($m^3/h$), into indoor area ($m^2$) and number of poultry reared in the poultry building. Results: Mean exposure levels for total dust and respirable dust in the poultry buildings were $3.91({\pm}1.99)mg/m^3$ and $1.99({\pm}0.89)mg/m^3$, respectively. The emission rates of particulate matter in the poultry buildings were estimated as $4.75({\pm}1.22)mg\;head^{-1}h^{-1}$ and $64.39({\pm}24.95)g\;m^{-2}h^{-1}$ for total dust and $0.58({\pm}0.23)mg\;head^{-1}h^{-1}$ and $7.52({\pm}2.51)mg\;m^{-2}h^{-1}$ for respirable dust, respectively. The distribution patterns for total dust and respirable dust were similar regardless of poultry building type. Among poultry buildings, broiler house showed the highest exposure level and emission rate of total dust and respirable dust, followed by layer house with manure belt and caged layer house. Conclusions: The finding that the broiler house showed the highest exposure level and emission rate of particulate matter can be attributed to sawdust utilized as bedding material, which can be dispersed into the air by movements of the chickens. Thus, a work environmental management solution for optimally reducing dust concentrations is necessary for broiler houses.

• 한국주조공학회지
• /
• 제13권4호
• /
• pp.369-381
• /
• 1993

Aluminum alloy(AC8A) matrix composites reinforced with SiC particles(10% in vol.) were fabricated by Centrifugal Spray Deposition(CSD) process. The microstructures were investigated in order to evaluate both the mixing mode between aluminum matrix and SiC particles, and the effect of SiC particles on the cooling behaviours of droplets during flight and preforms deposited. A non-continuum mathematical calculation was performed to explain and to quantify the evolution of microstructures in the droplets and preforms deposited. Conclusions obtained are as follows; 1. The powders produced by CSD process showed, in general, ligament type, and more than 60% of the powders produced were about 300 to 850 um in size. 2. AC8A droplets solidified during flight showed fine dendritic structure, but AC8A droplets mixed with SiC particles showed fine equiaxed grain structure, and eutectic silicon were formed to crystallize granularly between fine aluminum grains. 3. SiC particles seem to act as a nucleation sites for pro-eutectic silicon during solidification of AC8A alloy. 4. The microstructure of composite powders formed by CSD process showed particle embedded type, and resulted in dispersed type microstructure in preforms deposited. 5. The pro-eutectic silicon crystallized granularly between fine aluminum grains seem to prohibit grains from growth during spray deposition process. 6. The interfacial reactions between aluminum matrix and SiC particles were not observed from the deposit performs and the solidified droplets. 7. The continuum model seem to be useful in connecting the processing parameters with the resultant microstructures. From these results, it was concluded that the fabrication of aluminum matrix composites reinforced homogeneously with SiC particles was possible.

• KSBB Journal
• /
• 제5권1호
• /
• pp.59-67
• /
• 1990

생성물의 분리 및 효소의 회수를 위하여 수평흐름 한외여과장치를 부착한 기포탑에서 섬유소의 연속적인 효소 가수분해 반응을 연구하였다. 기포탑을 효소 가수분해 반응 공정에 이용할 경우 기체유속의 범위는 1-3cm / sec로 기포의 합체현상이 발생하지 않는 dispersed bubble flow 영역이 적합하며 혼합도 거의 완전하게 이루어짐을 확인하였다. 효소 회수장치에 한계분자량이 $10^4$인 여과막을 사용하였을 경우 효소의 활성이 저하되지 않은 채 대부분이 회수되었고 glucose 및 cellobiose의 배제율은 0이었다. 따라서 수평흐름 한외 여과장치는 효소의 연속회수장치로 작합하였으며 반응생성물이 연속적인 분리로 섬유소의 당화율을 증가시켰다. 화분식 반응의 경우 반응시간이 8시간이내에서 실험치는 성능식에 잘 부합되었으나 반연속식 및 연속식 반응의 경우에는 이론값과 차이가 있었다. 이는 반응기 내에서의 효소의 변성에 기인된다. 반연속식 및 연속식 반응의 경우 희석율을 증가시킴에 따라 전환율은 증가하나 반응액중의 환원당의 농도는 낮아진다. 따라서 적정한 기질 공급속도 및 희석율은 효소의 회수비용, 생성물의 농축비용 및 기질의 공급비용등의 경제적 요소를 고려하여 판단하여야 한다. 이상의 결과로부터 수평흐름 한외여과장치를 효소 회수장치로 기포탑에 응용할 경우, 효소의 재사용이 가능할 뿐 아니라 당화율을 증가시킴으로서 연속반응기로 효과적이라고 판단되었다.

• 한국분말재료학회지
• /
• 제26권3호
• /
• pp.208-213
• /
• 2019

In this study, lanthanum oxide ($La_2O_3$) dispersed molybdenum ($Mo-La_2O_3$) alloys are fabricated using lanthanum nitrate solution and nanosized Mo particles produced by hydrogen reduction of molybdenum oxide. The effect of $La_2O_3$ dispersion in a Mo matrix on the fracture toughness at room temperature is demonstrated through the formation behavior of $La_2O_3$ from the precursor and three-point bending test using a single-edge notched bend specimen. The relative density of the $Mo-0.3La_2O_3$ specimen sintered by pressureless sintering is approximately 99%, and $La_2O_3$ with a size of hundreds of nanometers is uniformly distributed in the Mo matrix. It is also confirmed that the fracture toughness is $19.46MPa{\cdot}m^{1/2}$, an improvement of approximately 40% over the fracture toughness of $13.50MPa{\cdot}m^{1/2}$ on a pure-Mo specimen without $La_2O_3$, and this difference in the fracture toughness occurs because of the changes in fracture mode of the Mo matrix caused by the dispersion of $La_2O_3$.