• Korean Journal of Environmental Biology
• /
• v.31 no.1
• /
• pp.10-18
• /
• 2013

Oil spills have occurred throughout the years of industrialization and represent a global challenge as they affect vast areas of the ocean. The toxicity of crude oil to aquatic organisms has been extensively investigated, but the potential impacts of crude oil on vertebrate development remain largely unknown. Here, we investigated the effects of dispersants used in treating a recent oil spill, as well as that of crude oil, on vertebrates by using the zebrafish (Danio rerio) model species, which has been widely used in empirical studies of both early embryonic development and adult physiology. Chronic exposure to crude oil resulted in marked developmental abnormalities, including pericardial edema, abnormal trunk vessel development, retardation of axonal branching, and abnormal jaw development. Embryonic development was affected more severely by exposure to the oil-dispersant combination than to the oil alone. Thus, the zebrafish in vivo model system suggests that dispersant treatment can have detrimental developmental effects on vertebrates and its potential impact on marine life, as well as humans, should be carefully considered in clean-up efforts at the site of an oil spill.

• Journal of Korean Society on Water Environment
• /
• v.20 no.5
• /
• pp.520-524
• /
• 2004

As a feasibility study for the application of carbon nanotubes to the treatment of environmental pollutants, the adsorption characteristics of humic acid on carbon nanotubes has been investigated. The dispersion features of carbon nanotubes in aquatic environment were investigated by measuring the variation of their electrokinetic potentials with pH, and the effects of some dispersants on their dispersion features were also examined. Under the experimental conditions, humic acid was observed to mostly adsorb on nanotubes within a few minutes and reach the equilibrium state within about one hour. The adsorption features of humic acid on nanotubes were found to follow the Freundlich model better than the Langmuir Model. Humic acid adsorbed on carbon nanotubes endothermically and the change of enthalpy in adsorption reaction was estimated to be ca. 18.37kJ/mol at standard state. The entropic change in adsorption reaction for humic acid was ca. 0.0503kJ/mol at standard state and the activation energy for adsorption was also estimated based on the change of rate constants with temperature. FT-IR investigations showed that the functional groups such as alcohol, ester, and aromatics existing in the chemical structure of humic acid might work as the bridge in its adsorption on nanotubes.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 1999.11b
• /
• pp.61-69
• /
• 1999

Contaminants such as fatty acids, triglycerides, resin acids and foam collected from a high yield sulfite weak liquor storage tank lowered the water surface tension and reduced inter-fibre bonding but also tended to benefit sheet opacity. Some common wet end additives such as defoamers and dispersants gave similar results. Lignosulfonate and naphthalene sulfonate showed little if any negative effect on both surface tension and sheet strength properties. Among the natural wood extractives. fatty acids were identified to be most detrimental followed by triglycerides and then resin acids. In order to alleviate the detrimental impact of these contaminants, membrane separation, air floatation and ozone treatment were carried out on paper machine white water samples. The effect of these treatments on removal of fatty and resin acids was quantified by a GC-Mass analysis. Reverse osmosis with a 1000 molecular weight cut off membrane failed to totally reject fatty and resin acids, but markedly reduced losses of sheet properties due to contaminants. Ozone treatment resulted in a significant increase of the surface tension and air floatation was considered to be a practical and useful method for removing fatty and resin acids from the machine white water.

• Korean Journal of Materials Research
• /
• v.19 no.3
• /
• pp.156-162
• /
• 2009

Lubricant-based nanofluids were prepared by dispersing carbon nanoparticles in gear oil. In this study, the effects of the particle size, shape and dispersity of the particles on the tribological properties of nanofluids were investigated. Dispersion experiments were conducted with a high-speed bead mill and an ultrasonic homogenizer, and the surfaces of the nanoparticles were simultaneously modified with several dispersants. The effective thermal conductivity of the nanofluids was measured by the transient hot-wire method, and the tribological behaviors of the nanofluids were also investigated with a disk-on-disk tribo-tester. The results of this study clearly showed that the combination of the nanoparticles, the deagglomeration process, the dispersant and the dispersion solvent is very important for the dispersity and tribological properties of nanofluids. Lubricant-based nanofluids showed relatively low thermal conductivity enhancement, but they were highly effective in decreasing the frictional heat that was generated. For nanofluids containing 0.1vol.% graphite particles in an oil lubricant, The friction coefficient in the boundary and fluid lubrication range was reduced to approximately 70% of the original value of pure lubricant.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.261-262
• /
• 2008

분산제의 종류와 함량이 무기물-유기물 복합재료의 레올로지 특성 및 유전특성에 미치는 영향에 대하여 고찰하였다. 먼저 Multiple light scattering 방법을 통하여 용액의 입자 이동속도와 용액의 맑은층의 두께변화를 살펴보았으며 이를 통해 적정한 분산제의 선정 및 선정된 분산제의 함량비에 따른 무기물 분말의 분산 특성을 고찰하였다. 그리고 테이프 캐스팅을 통하여 테이프를 제작한 후 1GHz에서 유전특성을 측정하였다. 위 결과들을 통하여 분산제의 종류와 함량비에 따라 용액 및 슬러리의 특성이 다르며 적정한 분산제를 사용하여 유전상수 16.5에 유전손실 0.0058의 복합재료를 제작할 수 있었다.

• Journal of the Korean Society of Safety
• /
• v.34 no.6
• /
• pp.22-28
• /
• 2019

In South Korea, the enact of Korean Coast Guard Act-1 manages physical and chemical oil-dispersants. Oil snare, which is made of polypropylene, is newly added to the aforementioned act, and it has advantage on the ease of recovery compare to other adsorbents. This study synthesized bunker B-oil with diesel-oil and bunker C-oil to perform an adsorption test based on three samples which were manufactured in South Korea. As a result, adsorption test revealed 5.2 g/g more adsorption than the previous results from the act. Additional toluene test revealed that all the samples satisfied 90.0%, however coloured samples could release its pigment on the marine environment. Thus, colorless samples are recommended on the risk management of marine accidents. The study on the basic direction of the calculation of the test items and the standard value for the quality control of the oil snare was also carried out.

• Elastomers and Composites
• /
• v.56 no.3
• /
• pp.136-151
• /
• 2021

Biomass lignin, a waste produced during the paper and bio-ethanol production process, is a cheap material that is available in large quantities. Thus, the interest in the valorization of biomass lignin has been increasing in industrial and academic areas. Over the years, lignin has been predominantly burnt as fuel to run pulping plants. However, less than 2% of the available lignin has been utilized for producing specialty chemicals, such as dispersants, adhesives, surfactants, and other value-added products. The development of value-added lignin-derived co-products should help make second generation biorefineries and the paper industry more profitable by valorizing lignin. Another possible approach towards value-added applications is using lignin as a component in plastics. However, blending lignin with polymers is not simple because the polarity of lignin molecules results in strong self-interactions. Therefore, achieving in-depth insights on lignin characteristics and structure will help in accelerating the development of lignin-based products. Considering the multipurpose characteristics of lignin for producing value-added products, this review will shed light on the potential applications of lignin and lignin-based derivatives on polymeric composite production. Moreover, the challenges in lignin valorization will be addressed.

• Journal of the Korea Convergence Society
• /
• v.9 no.12
• /
• pp.181-187
• /
• 2018

The historical consumption of oil dispersant was recorded during the protection plans after huge oil spill occurred in the Gulf of Mexico in 2010. As a well-known oil dispersant, Corexit 9500 was used and continuously blamed for the negative effects on environmental ecology. Nevertheless, US EPA still recognizes Corexit 9500 as a future oil dispersant that might be possibly sprayed again to oil slick. In order to develop alternative oil dispersants, it is important to impel the convergency works mainly from microbiologist, ecologist, environmentalist, chemist, and chemical engineer. In this paper, the major components of Corexit 9500 were introduced by chemical structures and physical properties. Presented were also the biodegradable process of dispersed oils and the possible candidates of biosurfactants.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.05a
• /
• pp.95-96
• /
• 2023

In this study, the table flow of fiber reinforced cement composites mixed with CNTs dispersed differently according to the dispersion method was evaluated. The mixture was composed of plain mixture according to the presence or absence of ultrasonic dispersion and PCE-based dispersants A and B of 0.5% and 1.0%, respectively, CNT was mixed with 0.03% of cement weight and fiber was mixed with 1.5% of total volume. As a result of the experiment, NC-A0.5 showed a fluidity similar to that of P without CNT. The fluidity of NC-A0.5 and P-N showed a similar tendency, which is considered to be due to the distribution of evenly dispersed CNT particles without agglomeration between cement particles due to the dispersant. NC-B0.5 showed a similar level of firmness to P-U, but after hitting 250 mm, B Agent seems to have a significant effect on liquidity improvement.Both NC-A1.0 and NC-B1.0 seem to have increased flow due to excessive dispersion.

• The Korean Journal of Pesticide Science
• /
• v.10 no.1
• /
• pp.28-35
• /
• 2006

This study was conducted to optimize formulation factors of a self-dispersible floating granule of flucetoaulfuron that can be used at a low application volume (5 kg $ha^{-1}$). SPA and xanthan gum were selected as a binder because blending of them showed good granulation and floatation. Potassium chloride selected as a filler also showed good granulation, floatation and disintegration properties. Among wetters and dispersants, Surfynol 440 gave the best dispersibility The optimum granule size was determined to be 1.0 mm considering floating time and dispersibility. Flucetosulfuron was mixed with the blend of SPA and xanthan gum, potassium chloride, and Surfynol 440 and formulated as a floating self-dispersible granule at 1.0 mm in diameter. Indoor and outdoor field experiments showed that the floating granule of flucetosulfuron performed well, covering long range from the application spot up to 15 m in weed control. Therefore, this floating technology may be used for laborsaving herbicide formulation development and help to reduce workloads for herbicide application.