• Journal of the Korean Society of Marine Environment & Safety
• /
• v.13 no.4
• /
• pp.51-54
• /
• 2007

Surfactants can be used as a cosmetics and chemical dispersants. The variation of critical micelle concentration(CMC) with temperature for hexadecyl pyridinium bromide over the range $40^{\circ}C$ to $60^{\circ}C$ has been measured by drop methods. Thermodynamic quantities for micellization of hexadecyl pyridinium bromide in water have been calculated by polynominal equation.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.3 no.3
• /
• pp.58-65
• /
• 2000

Responses to marine oil spills can be classified Into categories; 1) mechanical treatment using booms and skimmers, 2) chemical one utilizing dispersants, 3) controlled in-situ burning of spilled oils. In the present paper, characteristics, history, present issues, advantages and disadvanteges, and future applicability of in-situ burning technology which is nowadays winning much attention are summarized on the basis of a survey of related papers and other resources.

• Journal of the Korean Applied Science and Technology
• /
• v.28 no.4
• /
• pp.449-454
• /
• 2011

This surfactant can be used as a cosmetics and chemical dispersants. The variation of critical micelle concentration(CMC) with temperature for N-eicosyl pyridinium bromide over the range $40^{\circ}C$ to $60^{\circ}C$ has been measured by drop methods. Thermodynamic quantities for micellization of N-eicosyl pyridinium bromide in water have been calculated by polynominal equation.

• The Korean Journal of Ecology
• /
• v.24 no.2
• /
• pp.121-123
• /
• 2001

Gums, resins and gum-resins represent a variety of plant exudates that are highly prized and are extensively used in various industries. The usage of water soluble gums is growing at faster rate as they are excellent suspending agents, dispersants stabilizing agents, emulsifiers and gel forming agents. The gums are made up of carbohydrate polymers, composed of sugar units glycosidically condensed to form large molecules. Resins are non-volatile products, and oxidative products of terpenes or fatty acids, and are of greater commercial importance. They are soluble in water and contrasted with gums, soluble in organic solvents only.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.20 no.5
• /
• pp.450-455
• /
• 2007

LCD color filters have been manufactured in a process called photolithography to date, but various printing methods have been studied currently in response to the trend of low-end LCD panels. Direct Printing Process is a suitable fabrication technique to develope pigment components whose dimensions are in nano. The success of this process depends on the systematic preparation of pigment millbase. Conventional millbase dispersions are constituted of the organic pigments, monomer, dispersant and solvents. An experimental study on the rheology of millbase dispersions is presented. Subsequently, this thesis attempts to find out the dispersive characteristics as well as the selection of pigments, monomers and dispersants in the part of millbase among the stages of manufacturing LCD color filters using the direct printing methods. The dispersive characteristics were shown through analytic devices such as PSA, Rheometer, etc.

• Journal of Magnetics
• /
• v.13 no.3
• /
• pp.106-109
• /
• 2008

Almost monodisperse iron oxide nanoparticles with an average particle size ranging from 5 to 43 nm were fabricated using an environmentally friendly starting material, ferrous acetate. The smallest particles were formed in the presence of a reductant, 1,2-dodecanediol, while the particle size increased with increasing concentration of dispersing agents. The dispersants consisted of various combinations of oleic acid, oleylamine, trioctylphosphine, and polyvinylpyrrolidone. The threshold temperature to form crystalline particles was found to be $240^{\circ}C$. The 43 nm nanoparticles exhibited a room temperature saturation magnetization and coercivity of 57 emu/g and 47 Oe, respectively.

• Journal of the Korean Ceramic Society
• /
• v.25 no.6
• /
• pp.615-622
• /
• 1988

To develope good slip and microstructure of Si3N4 the knowledge of the interaction of particles in liquid systems is required. In this work polyethyleneimines was tested as a stabilizer for Si3N4-water system. The stability of slip dispersed with polyethyleneimines was good over a wide range of pH and concentrated slips with low viscosity could be cast. This work comprises a systematic investigation including determination of electrical mobility in order to estimate the particle surface charge, determination of sedimentation rate, as well as measurements of the viscosity as a function of dispersants, pH and shear rates. The influence of deflocculation on the microstructure of slip cast Si3N4 was discussed.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2009.05b
• /
• pp.101-106
• /
• 2009

We study on the segregation reduction effect of Self-Leveling Color Mortar by using variable composition set of plasticizer and thickener, Naphthalene, melamine and polycarbonate-based dispersants were employed as plasticizers for examining on fluidity of mortar mixtures. For enhancement of mortar stability without loss of it's fluidity, two types of thickener were used such as polysaccharide(PS) and hydroxyethylcellulose(HEC). As a result, the most effective mortar was composed by feeding 0.519% of polycarbonate-based dispersant with 0.002587% of PS and 0.155844% of HEC on amount of basic mortar.

• Journal of the Korean Ceramic Society
• /
• v.27 no.5
• /
• pp.684-692
• /
• 1990

Ultrafine magnetite powder for the ferromagnetic fluid was prepared by an addition of alkaline solution to the solution containing Fe2+ and Fe3+ ions at 6$0^{\circ}C$. The optimum condition of the magnetite synthesis was delineated by examining such various physico-chemical properties as Fe2+/Fe+3 ratio in the powder, phase characteristics, MHC and $\sigma$max. A new scheme for the steric stabilization of colloidal dispersion was proposed using the concept of the buffer group action for the increased interfacial density of the stabilizing moieties at colloid particle/dispersion medium interface. The proposed concept was successfully applied to the preparation of the kinetically stable kerosinebased ferrofluid using Tween and Span as dispersants. In the dispersion of magnetite particles in a kerosine, Tween(polyoxyethylene sorbitan oleate) acts as a primary stabilizer which provides an anchor group, whereas Span(sorbitan oleate) can be classified as a secondary stabilizer which adsorbs on the surface of magnetite particle through the action of the buffer group. Dispersion studies using various quantities of Tween and Span supported the concept of the buffer group action for increased dispersion characteristics of the kerosine based ferromagnetic fluid.

• Journal of the Korean Ceramic Society
• /
• v.28 no.8
• /
• pp.577-584
• /
• 1991

Among various forming techniques for ceramics, we have studied the slip casting method for the binary system of SiC and carbon. The stability of the slip of silicon carbide and carbon were investigated by measurements of zeta potential, viscosity, sedimentation height, and also studied as functions of PH and amounts of dispersants. A preform of SiC and C was prepared by slip casting and heat treatment at 400∼600$^{\circ}C$ under N2 gas. The preform was reacted with Si metal at 1550$^{\circ}C$, 10-1 mmHg to give rise a reaction bonded SiC with a density of 3.0g/㎤ and a bending strength of 580 MPa.