• 제목/요약/키워드: dispersants

검색결과 74건 처리시간 0.029초

유처리제 사용해역 선정기준개발 (Development of guideline to use dispersants)

  • 이문진;성홍근;강창구
    • 한국해양환경ㆍ에너지학회지
    • /
    • 제9권1호
    • /
    • pp.29-35
    • /
    • 2006
  • 우리나라 주변해역에 대한 유처리제 사용 가능여부를 판단할 수 있는 지침을 개발하고, 그 지침을 적용하여 우리나라 주변해역 전 연안에 대하여 유처리제 사용 기능여부를 나타내는 색인도를 작성하였다. 본 연구에서 유처리제 사용 가능여부는 수심조건과 환경민감자원에 미치는 영향으로 판단하였으며, 이러한 판단조건에 따라 우리나라 주변 해역을 1) 현장방제책임자 재량으로 유처리제를 사용할 수 있는 해역, 2) 주변상황을 고려한 후 사용할 수 있는 해역, 3) 유처리제를 가능한 억제해야할 해역 등의 3 가지 해역으로 구분지었다. 본 연구의 결과로서 우리나라 주변해역을 12개로 구분한 세부해역에 대해 유처리제 사용 가능여부를 나타내는 색인도를 제시하였다.

  • PDF

유처리제 방제 효용성 및 안전성 비교 연구 (A Study on the Effectiveness and Safety Comparison of Dispersants)

  • 진영민;이준혁;조영혁;이순홍
    • 한국안전학회지
    • /
    • 제30권6호
    • /
    • pp.148-155
    • /
    • 2015
  • Using dispersants is known to be an effective solution to accelerate the natural dispersion and being an appropriate oil spill response strategy. By breaking up large oil chunks into small droplets, dispersants are generally intended to help reducing further oil exposures and slicks. Collecting property data of circulating crude oil in South Korea and understanding the interaction between crude oils and dispersions need to be preceded for the effective dispersant use. This paper provides an property analysis of three selected oils which have the same composition of spilt oils from the Herbei Spirit Incident and conducts an emulsification and toxicity experiment with selected domestic and foreign dispersants. Results will present a direction of future domestic dispersants' development which aimed at eco-friendly and safety.

다양한 분산제에 의한 AlN-Y2O3 혼합분말의 비수계 용매 중 분산특성 (Dispersion Characteristics of AlN-Y2O3 Powder Mixture by Various Dispersants in Non-aqueous Solvents)

  • 김신;방상우;황인준;윤상옥;신현호
    • 한국세라믹학회지
    • /
    • 제51권4호
    • /
    • pp.324-331
    • /
    • 2014
  • The dispersion characteristics of AlN-4.5 wt% $Y_2O_3$ powder mixture by various dispersants were investigated in ethanol and methyethly-ketone (MEK) solvents. In general, the cationic polymer dispersants demonstrated superior dispersion of the powder as compared to the non-ionic ester-type dispersants or anionic phosphate-ester-based ones. The dispersion performance of the cationic polymer dispersants was sensitive to the type of solvent. An anhydric maleic-acid-based graft copolymer dispersant, AFB-1521, demonstrated a very good dispersion capability in ethanol but exhibited a much inferior dispersion in MEK. On the other hand, the dispersion of the powder mixture was very good with a phosphate-ester-based block polymer dispersant, BYK-111, in MEK solvent, while dispersionwas much degraded in ethanol.

수성 현탁액에서 카르복실기를 포함하는 혼합 분산제에 의한 이트리아 안정화 지르코니아의 분산성 향상 (Enhanced Dispersion of Yttria Stabilized Zirconia by Mixed Dispersants Containing Carboxyl Group in Aqueous System)

  • 김수현;강종봉;배성환
    • 한국재료학회지
    • /
    • 제28권2호
    • /
    • pp.82-88
    • /
    • 2018
  • Stable slurries of YSZ in aqueous suspension with added polymer dispersants, namely, poly-methacrylic acid ammonium salt (PMMA), poly-acrylic acid (PAA) and poly-acrylic-co-maleic acid (PAMA), were mixed with the monomolecular dispersants citric acid and oxalic acid. The dispersion properties of the suspension were investigated using PSA, viscosity, sedimentation, and FT-IR. The polymer dispersants and monomolecular dispersants were attached to the YSZ surface by the carboxylic group, as shown by the FTIR results. A stabilized aqueous suspension was obtained when the polymer dispersant and citric acid were mixed and compared to the use of citric acid alone as a dispersant agent. When the polymer dispersant and citric acid were mixed and milled through attrition milling, there was a smaller particle size compared to when the polymer dispersant alone was used as a dispersant agent. This study determined that the particle size of the mixed dispersant was affected by the properties of the monomolecular dispersant and that the stability of the suspension was affected by the polymer dispersant. However, when slurries of YSZ were mixed with oxalic acid, the particle bridging behavior was the result of the high degree of viscosity and the small sedimentation height.

해수중에서 유처리제 및 유처리제/Bunker-C유 혼합물의 생분해도와 용존산소소비에 관한 연구(I) - 유처리제의 생분해도와 용존산소소비 - (Study on the Biodegradability of Dispersants and Dispersant/Bunker-C Oil Mixtures and the Dissolved Oxygen Consumption in the Seawater(I) - The Biodegradability of Dispersants and the Dissolved Oxygen Consumption in the Seawater -)

  • 김광수;박청길;유선재
    • 한국수산과학회지
    • /
    • 제26권5호
    • /
    • pp.493-501
    • /
    • 1993
  • 유처리제의 생분해도와 유처리제가 해수중의 용존산소에 미치는 영향을 구명하기 위해서 세 제품의 유처리제(SG, GL, WC)와 비이온 계면활성제(OA-5)에 대한 TOD분석, 원소분석 및 해수중에서의 생분해 실험을 행한 결과를 요약하면 다음과 같다. 1. 1mg의 유처리제는 $2.37{\sim}2.80mg$의 TOD, 1mg의 비이온 계면활성제는 2.45mg의 TOD를 나타내었다. 2. 유처리제는 탄소가 $67.6{\sim}76.5\%$, 수소가 $10.2{\sim}12.3\%$였고, 비이온 계면활성제는 탄소가 $65.3\%$, 수소가 $10.3\%$였으며 어느 것에서도 질소는 검출되지 않았다. 3. 유처리제는 생분해시 제품에 따라 다소 차이가 있었으나 1mg의 유처리제가 $0.403{\sim}0.595mg$$BOD_5$$0.703{\sim}0.855mg$$BOD_{20}$를 유발하였다. 또한 1mg의 비이온 계면활성제는 0.50mg의 $BOD_5$ 및 0.97mg의 $BOD_{20}$를 나타내었다. 4. 해수중에서 탈산소계수($K_1$)는 유처리제(4.0mg/l)의 경우 $0.121{\sim}0.171/day$, 비이온 계면활성제(2.0mg/l)의 경우 0.181/day로 나타났다. 또한 유처리제 1mg의 최종산소요구량($L_o$)은 $0.789{\sim}0.953mg$로서 계면활성제 1mg의 최종산소요구량 0.956mg과 비슷하였으며, Glucose 1mg의 TOD값 1.07mg에 접근하는 값이었다. 5. 해수 중의 생분해도($BOD_5/TOD$)에 있어서, 유처리제는 $17{\sim}21\%$, 비이온 계면활성제는 약 $20\%$로서 모두 중간 분해군에 속하였다.

  • PDF

미국 멕시코만 기름유출사고에서 본 유처리제 사용의 효용성 고찰 (The Effectiveness of the Dispersant Use during the "Deepwater Horizon" Incident -REVIEW of the Proceedings from 2011 International Oil Spill Conference-)

  • 조현진;하창우
    • 해양환경안전학회지
    • /
    • 제18권1호
    • /
    • pp.61-65
    • /
    • 2012
  • 바다에 기름오염 사고가 발생하면 여러 가지 방제 방법 중 물리적 회수 방법을 우선적으로 사용하고 유처리제는 최후 수단으로 고려하는 경향이 있다. 유처리제는 수중으로 기름이 신속히 분산되도록 하여 해수면으로부터 제거하는 방법이다. 해수면으로부터 신속히 기름을 제거하는데 대한 유처리제의 효용성은 널리 증명되어 왔으나 아직도 대부분의 국가들은 해양환경에 미치는 독성을 우려하여 적극적인 사용을 하지 않고 있는 실정이다. 보고된 자료에 의하면 유처리제와 혼합된 기름이 기름 그 자체보다 독성이 더 크게 나타나지 않았다. 멕시코만 기름유출 사고시 미국 정부와 BP사는 최대한 해안에 기름이 도달하지 않는데 중점을 두고 해수면뿐만 아니라 수중의 기름에 대해서도 유처리제를 사용하였다. 유처리제에 대한 순환경편익을 분석하면 유처리제를 사용함으로써 기름이 생태계에 머무는 시간이 줄어들며 장기간 노출을 예방하고 야생동물에 심각한 오염을 방지하는 효과가 있는 등 다양한 연구가 진행되고 있다. 미국 멕시코만 유류오염 사고와 같은 대규모 해양오염사고의 위험이 상존하는 우리 실정에서도 과학적 결과를 바탕으로 한 유처리제 사용의 효용성과 안전성에 대한 검토가 이루어져야 할 시점이라 사료된다.

자성 분리를 이용한 해상 유류오염제어에 사용되는 유화제를 제거하는 새로운 기술에 대한 연구 (Innovative Technology for Removal of Dispersants used in Oil Spill Remediation Using the Magnetic Separation)

  • 천찬란;박재우
    • 대한환경공학회지
    • /
    • 제22권4호
    • /
    • pp.679-688
    • /
    • 2000
  • 최근 해상유류오염사고시 사용되는 유화제는 해안으로 이동하여 또 다른 수질오염의 원인으로 문제가 되고 있다. 이 연구에서는 자성을 띠고 있는 흡착제를 이용하여 해수 속에 잔류하는 유화제를 제거하는 기술에 대해서 논의하였다. 본 실험에서는 자성을 띠는 흡착제로서 마그네타이트와 마그헤마이트를 이용하였고, 대표적인 유화제 성분으로는 음이온성 계면활성제인 SDDBS (Sodium dodecylbenzene sulfonic acid)와 비이온성 계면활성제인 Triton X-100 (t-octylphenoxypoly-ethoxyethanol)을 사용하였다. 실험은 두 흡착제의 유화제에 대한 흡착 평형시간과 흡착능에 대한 회분식 실험과 모의 실제 상황에서 흡착제가 영구자석이나 전자석에 의해 수거되는 양상을 알아보기 위한 수조실험으로 나누어 이루어졌다. 마그헤마이트는 계면활성제의 종류와 사용된 물의 종류에 상관없이 제거효율이 일정하게 나타나는데 비해 마그네타이트는 음이온성 계면활성제에 대해 선택적으로 고효율을 보이고 있고, 이온이 존재하는 해수보다는 증류수의 경우가 높은 효율을 보이고 있다. 미그네타이트의 흡착메커니즘은 정전기적 인력에 의한 것으로 판단되고, 마그헤마이트의 경우는 정전기적 인력과 함께 흡착능을 향상시키는 구조적 특정과 표면상태의 특성으로 설명되어진다. 수조실험에서는 흡착이 이루어진 후 자석에 의한 회수는 100%에 가까운 것으로 나타났다. 이와 같은 결과는 두 흡착제와 사석에 의한 유화제 제거방법이 실제 해상에서 적용되었을 때 유화제를 짧은 시간 내에 고효율로 처리할 수 있는 효과적인 방법임을 시사한다.

  • PDF

중유용 분산제 구조에 따른 중유 분산 특성 (Dispersing Properties of Heavy Crude Oil according to Dispersant Structures)

  • 손정매;김남균;신지훈;양영도;김영운
    • Tribology and Lubricants
    • /
    • 제31권6호
    • /
    • pp.251-257
    • /
    • 2015
  • Heavy oil production is receiving significant attention because of increased demands for thermal power generation systems of the diesel engine and boilers. However, asphaltene, which is a heavy oil components (6-8 wt%), reduces the heat efficiency of the fuels owing to its agglomerated sludge of asphaltene during the burning process. Therefore, for hassle-free operation, we should develop asphaltene dispersants to suppress the formation of the sludge. We prepare variable salt-type polymeric dispersants using poly(isobutenyl succinic anhydride) and poly(amine) through both condensation esterification and acid-base neutralization reactions, which we subsequently evaluate for dispersing performance, using Turbiscan measurement. Total acid number (TAN) and total base number (TBN) of 75Lec-25SynDis.2 composed of lecithin and the prepared polymeric salt having the ratio of 3 : 1 are 18.9 and 33.7 mg KOH/g, respectively, which are comparable to those of the commercial dispersants (15.8 and 26.5 mg KOH/g). We determine the initial turbidity observed for 15 min of the polymeric dispersant was determined with transmittance (%), which can be calculated to separability number (SN). The SN value of 75Lec-25SynDis.2 is close to zero, which is superior to that of commercial dispersants and lecithin (0.015 and 0.017).

Copper Phthalocyanine Pigment의 분산을 위한 (2-Dimethylamino)ethyl Methacrylate와 Oligo(ethylene oxide)methyl Ether Methacrylate를 포함하는 잘 규정된 블록 공중합체형 분산제의 원자 이동 라디칼 중합을 이용한 합성 (Synthesis of Well-Defined Block Copolymer Dispersants with (2-Dimethylamino)ethyl Methacrylate and Oligo(ethylene oxide)methyl Ether Methacrylate via ATRP for Dispersing Copper Phthalocyanine Pigment)

  • 김은희;김봉수;정기석;김진구;백현종
    • 폴리머
    • /
    • 제36권1호
    • /
    • pp.104-110
    • /
    • 2012
  • LCD 컬러필터에서 안료의 분산은 컬러 강도를 증가시키는 중요한 요소이므로, 안료를 분산시키기 위한 안료 분산제의 첨가는 필수적이라 할 수 있다. 안료 분산제로서의 고분자는 안료와의 친화성을 가지는 anchoring group과 매체와의 혼화성을 가지는 stabilizing group을 포함하고 있다. 원자 이동 라디칼 중합은 잘 규정된 고분자 합성을 가능하게 하는 중합법으로, 이러한 구조를 포함하는 고분자형 안료 분산제를 얻기 위한 적절한 수단이 될 수 있다. Anchor로서 (2-dimethylamino)ethyl methacrylate를, stabilizer로서 oligo(ethylene oxide)methyl ether methacrylate를 각각 선택해 고분자 분산제를 합성하였다. 고분자의 구조 및 조성이 안료 분산에 미치는 영향을 연구하기 위해 다양한 길이의 stabilizing group을 가지는 diblock copolymer를 합성하여 비교하였다.

유처리제용 양이온 계면찰성제의 임계미셀농토에서 온도의 효과 (The Effect of Temperature on the Critical Micelle Concentration of Cationic Surfactant for Chemical Dispersants)

  • 김영찬
    • 해양환경안전학회지
    • /
    • 제14권2호
    • /
    • pp.145-148
    • /
    • 2008
  • 화장품과 유처리제 등에 응용할 수 있는 양이온 계면활성제인 N-octadecyl pyridinium bromide를 사용하여 온도 $40{\sim}60^{\circ}C$ 범위에서 적하법을 이용한 임계미셀농도를 적용 미셀형성에 따른 열역학적 특성(자유에너지, 엔탈피, 엔트로피, 열용량)을 조사하였다. 그 결과 자유에너지 변화는 온도가 증가함에 따라 감소함을 알 수 있었다.

  • PDF