• Journal of the Korean Society of Industry Convergence
• /
• v.23 no.2_2
• /
• pp.289-299
• /
• 2020

The composition of convergence cross-section of the material is a technique that provides reasonable design and construction of structures. It is frequently used in medium-sized bridges and architectural structures. However, the structural behavioral spare capacity enhancement of the structure by the application of the convergence cross-section is still limited by the expandability due to the limiting state of each material. In order to overcome these limitations, this study reasonably analyzed the construction stages before and after the convergence cross-section constructed and developed a technique for forming multi-point boundary conditions using struts, which are compression members. Based on the existing cases, a reasonable construction step for forming the material composite section of the entire structural system of the structure was derived, and a numerical analysis model for a specific part was constructed to analyze the behavior of the strut application. As a result of this study, the effect of reducing the sectional force of 7.40% in beam-column joint and 6.31% in the center of girder was derived, and the deflection, which is a measure of the serviceability of the structure, improved by 54.41% from the installation and dismantling of strut members at each construction stage.

• Journal of Construction Engineering and Project Management
• /
• v.1 no.2
• /
• pp.37-42
• /
• 2011

The key role in safety management is to identify any possible hazard before it occurs by identifying any possible risk factors which are critical to risk assessment. It is well known that falsework (temporary facilities) in construction projects is fundamentally important. This planning/assessment process is considered to be tedious and requires a lot of attention due to the following reasons: firstly, the installation and dismantling of those facilities are one of the high risk activities in the job sites. Secondly, temporary facilities are generally not clearly delineated on the building drawings. Therefore, it is our strong belief that safety tools have to be simple and convenient enough for the jobsite people to manage them easily and be flexible for any occasions to be occurred at various degrees. In order to develop a safety identification system of temporary facilities, this research utilizes the BIM technology in retrieving important information by importing data from BIM models and use it in the safety planning stage.

• Journal of the Korean Society of Safety
• /
• v.34 no.4
• /
• pp.95-102
• /
• 2019

The purpose of this study is to investigate the correlation between aluminum form work and noise-induced deafness by conducting special health examination on construction aluminum worker and noise measurement at the workplace. All the 11 aluminum form workers were diagnosed with noise-induced deafness after holding a special health examination. The workers have not had any previous history of noise-induced deafness which indicates that aluminum form work is related to noise-induced deafness disease. The impact noise of 120 dB(A)~125 dB(A), which exceeds the regulations of industrial safety and health act, was found during the dismantling rather than installation when noise measurement was made at the aluminum workplace. The aluminum form workers could permanently lose the hearing sense if they are exposed to this impact noise. This study is to suggest the method to prevent noise-induced deafness for aluminum form workers by firstly giving out hearing protection equipment at the construction site and secondly installing rubber mat, soundproof panel as well as changing the noise-lowering technique.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.7 no.1
• /
• pp.22-28
• /
• 2019

Cement is a basic material for the construction industry and it requires high temperature sintering when manufacturing cement. $CO_2$ emissions from raw materials and fuels are recognized as new environmental problems and efforts are underway to reduce them. Techniques for reducing $CO_2$ in concrete are also recommended to use blended cement such as blast furnace slag or fly ash. In addition, the construction waste generated in the dismantling of concrete structures is recognized as another environmental problem. Thus, various methods are being implemented to increase the recycling rate. The purpose of this study is to utilize the inorganic raw materials generated during the dismantling of the structure as a raw material for the low carbon type cement binder. Such as, waste concrete powder, waste cement block, waste clay brick and waste textile as raw materials for low carbon type cement binder. From the research results, low carbon type cement binder was manufactured from the raw material composition of waste concrete powder, waste cement block, waste clay brick and waste textile.

• The Journal of the Korea Contents Association
• /
• v.19 no.5
• /
• pp.64-73
• /
• 2019

This study analyzed the efficiency by using the DEA model to evaluate the competitiveness of specialty construction firms. The target of the analysis is 300 firms with continuous data from 2010 to 2017 as listed and externally listed firms. Significant analysis results are as follows. First, the efficiency of specialty construction firms is lower than that of general construction industry. Second, efficiency by type was highest in facilities construction and dismantling work. This shows that the relevant industries such as reinforced concrete works and scaffolding and demolition work are relatively efficient in specialty construction industry. Third, the efficiency of specialty construction industry is affected by economic fluctuations. When the construction industry is in the expansion phase, the efficiency value is high and the efficiency value is low in the down phase. Finally, in the scale profitability analysis, specialty construction industry was most analyzed by DRS. This means that it is effective to scale down for the efficiency of the firm.

• Design & Manufacturing
• /
• v.15 no.1
• /
• pp.8-13
• /
• 2021

Excavators are construction machines used for digging soil, transporting soil, dismantling buildings and clearing the ground at construction sites. There are various attachments attached to the arm end of the excavator and used for various operations. There are the most common types of buckets attached for excavation and other types of attachments used for foresting, road cleaning, snow removal, and waste disposal. When multiple types of work are done at the same time, several attachments must be replaced and a device called a quick coupler is used to reduce replacement time. Although a quick coupler reduces the replacement time of the Attachment, it is necessary to attach safety devices to prevent unintentional detachment of attached attachments during the operation. To prevent the attachment from leaving or falling regardless of the operator's intention, support is installed in the hook of the bucket pin and controlled through a separate hydraulic cylinder to ensure safety. When attaching an attachment, it shall be attached without any action. This study is intended to verify the design validity of safety devices to prevent falls of attachments occurring at construction sites.

• Journal of the Korean Society of Costume
• /
• v.65 no.6
• /
• pp.99-111
• /
• 2015

The purpose of this study is to identify the expression methods of uncanny images shown in contemporary fashion through the visual expression methods of plastic arts. The study results are as following. First, there is a concept-forming element of 'The return of Repressed', which is a psychological mechanism for generating uncanny sets to the component of 'repression' and 'return'. 'Repression' herein consisted of 'unconsciousness', 'the other', and 'anxiety', while the return was composed of 'trauma' and 'repetition compulsion'. Second, there are visual expression methods of the uncanny in contemporary art. The subject of 'repressed things' was expressed as grotesque and having a terrible look. 'Fragmented body' was analyzed as 'dismantling' by mutilation, 'combination' placing cut body parts in other places, and 'damage' suffering from an illness or accident. 'Fear of death' was shown as 'anatomy' reminiscent of death and 'iconography of death' meaning return of the dead. 'Post-human' was a surrealistic being such as a monster and mechanized human, and was analyzed as 'gene variation' and 'cyborg'. Third, the methods of visual expression of the uncanny reflected on contemporary fashion was analyzed as 'fragmented body', 'fear of death', and 'post-human'. 'Fragmented body' appeared as the object reminiscent of the fragmented body, 'dismantling and combination of the body', and 'damage of the body' through the distortion of the clothing construction principle. 'Fear of death' visualized the characteristic elements of the subject reminiscent of death as 'iconography of death' and 'symbolic object of death' through the motif. 'Post-human' was the description of the subject beyond the body's function and form, and was shown as 'gene variation' and 'cyborg'.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.1
• /
• pp.48-55
• /
• 2011

Hydraulic excavator is one of the most widely used heavy machines in construction sites including dismantling. In the dismantling sites, the excavators equipped with crusher or breaker carry out dangerous operations, so drivers are always exposed to unexpected danger. For safety operation, remote control of the hydraulic excavator has been studied using proportional control valve, which requires an appropriate motion control of its bucket tip. In this case, kinematics and dynamics analysis have to be preceded through modeling of excavator. However, it is difficult to acquire reasonable results from the analysis due to insufficient information of physical parameters such as mass of each links and locations of mass centers, etc. This study deals with the trajectory control of bucket tip, which is based on experimental estimation of cylinder output force. The estimated forces are fed into the control of each cylinder in order to compensate gravitational and frictional effects in the cylinders. The control was applied to horizontal trajectories that are for flattening work.

• Spatial Information Research
• /
• v.19 no.5
• /
• pp.53-62
• /
• 2011

Recently environmental pollution and resource depletion have been rapidly progressing in the world. Construction Industries discharge tones of wastes and consumes heavy resource as compared with the production activities of other industries, so it is the main reason of increasing of the Earth's environment. In Korea, as people become aware of the need of technical and institutional infrastructure for the recycling of construction wastes, they manage Allbraro system which is Total Management System in the wastes. Therefore, they promote the handling of standardized information, processing construction waste of transparency procure and promotion of the efficiency of task about the disposal of occurrence and movement of real-time construction waste. However, objective information for dismantling building did not construct in the organization of the system, so the emission of system randomly produces and discharges information of the waste. Because of that reasons, the exact value of waste abandonment is difficult to measure and recycling after waste disposal has the limit point. Therefore, in this study, advantages and disadvantages of the existing waste management system are analyzed, and we improved solution of construction building and environment of the city when BIM / GIS are utilized.

• Journal of the Korea Institute of Construction Safety
• /
• v.5 no.1
• /
• pp.9-16
• /
• 2023

Gang-foam is used in many construction projects because it is not only precise in terms of vertical, horizontal, and specifications, but also easy to install and dismantle. However, major accidents occur every year due to non-compliance with safety rules and work order, also manuals and checklists currently in use are insufficient. Thirty-seven surveys was conducted by analyzing major accident cases of domestic gang-form construction project and deriving 20 risk factors and 43 check points. Based on the survey, the importance and appropriateness of check points were evaluated. As a result of this study, a checklist was presented, check points were placed in the order of importance based on assembly, installation, dismantling, and lifting of the Gang-form process. The checklist was organized so that workers could comply with safety rules and work order. Through this, it is expected to prevent major accidents and contribute to efficient safety management.