• Proceedings of the Korean Vacuum Society Conference
• /
• 1998.02a
• /
• pp.109-109
• /
• 1998

최근 들어 MOCVD 법으로 성장시킨 GaN, InGaN, AIGaN를 이용한 광소자 ( (LED, LD)와 전자소자(FET, MODFET)에 대한 관심이 고조되면서, MOCVD 법 을 이용한 GaN 중심의 질화물 반도체 성장에 관심이 집중되고 있다. 금번 실험에 사용된 MOCVD 장비는 수직형 MOCVD 장비이다. 특히, wafer c carner를 1$\alpha$)() rpm이상의 고속으로 회전시킬 수 있는 장치로서 원료 가스의 반웅 기 내에서의 흐름을 균일하게 하여 uniformity가 높은 질화물 반도체를 성장시킬 수 있다 .. GaN 에피충은 c-plane 사파이어를 기판으로 하여 11 00 "C 이상의 고온 에서 수소를 이용하여 기판을 cleaning하고, 500 "C 부근에서 핵생성충올 성장시 킨 후 1050 "C에서 trimethylgallium(TMGa)과 NI-h를 이용하여 성장시켰다. n n -GaN를 성장시키기 위해서는 SiH4을 사용하였으며, InGaN의 경우는 t trimethylindium(TMIn)을 In원 료 가스로 하여 635 - 725 "C 범 위 에 서 성 장시 켰 다. 성 장된 undoped GaN, n-GaN, InGaN는 X -ray di잔raction(XRD), H떠l m measurement, Photoluminescence(PU동올 이용하여 결정성과 전기적 및 광학적 특성올 고찰하였다 .. 2ttm 두께로 성장된 undoped G값V박막의 경우 Hall 측정결과 6 6 X lOI6/e며 정도의 낮은 도핑 농도를 보였으며, V!lII ratio(2500 - 5000)증가에 따라 결정성이 향상됨을 GaN (102)면의 X -ray e -rocking분석올 통하여 확인하 였다 .. n-GaN의 경우 SiH4양올 3 - 13 sccm으로 증가시킴에 따라 n -type 도명농 도가 선형적으로 증가하였고, 1017/c며 범위 내로 도평이 된 경우 상온에서 300 e마 N Ns 이상의 high mobility를 얻올 수 있었다 .. PL 관측 결과로부터 Si 도핑으로 인 하여 GaN bandedge emission이 강화됨을 알 수 있었다 .. InGaN 박막의 경우 성 장온도를 낮춤에 따라서 m의 양을 증가시킬 수 있었다. 또한 유량비(TMIn I T TMGa)가 1에 가까운 경 우에서도 온도를 635 "C 정도로 낮훈 경우 410 nm정도에 서 PL bandedge peak올 얻을 수 있었으며, 이 때의 반치폭은 50 meV정도의 낮 은 값을 보였다. 반치폭은 50 meV정도의 낮 은 값을 보였다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.05a
• /
• pp.694-699
• /
• 2002

As the demand for slim laptops requires ion'-height optical disc drives, vibration problems of optical disc drives are of great concern. Additionally, with the decrease of a track width and a depth of focus in high density drives, studies on vibration resonance between mechanical parts become more important. From the vibration point of view, the performance of optical disc drives is closely related with the relative displacement between a disc and an objective lens which is controlled by servo mechanism. In other words, to read and write data properly, the relative displacement between an optical disc and an objective lens should be within a certain limit. The relative displacement is dependent on not only an anti-vibration mechanism design but also servo control capability. Good servo controls can make compensation for poor mechanisms, and vice versa. In a usual development process, robustness of the anti-vibration mechanism is always verified with the servo control of an objective lens. Engineers partially modify servo gain margin in case of a data reading error. This modification cannot correct the data reading error occasionally and the mechanism should be redesigned more robustly. Therefore it is necessary to verify a mechanism with respect to the possible servo gain plot. In this study we propose the experimental verification method far anti-vibration mechanism with respect to the existing servo gain plot. This method verifies axial vibration characteristics of optical disc drives on the basis of transmissibility. Using this method, we verified our mechanism and modified the mechanism for better anti-vibration characteristics.

• Korean Journal Plant Pathology
• /
• v.14 no.6
• /
• pp.646-650
• /
• 1998

Mycological characteristics of Phytophthora nicotianae var. nicotianae SPC10 (A1 type) causing Phytophthora rot of strawberry and the resistances of 11 strawberry cultivars against the pathogen were examined. Optimum temperature for the mycelial growth of the pathogen was obtained in the range of 30~35$^{\circ}C$, and the growth was completely stopped under 13$^{\circ}C$ or over 42$^{\circ}C$. Aerial mycelia were abundant on oatmeal agar (OMA), V-8 juice agar (V8A) and lima bean agar (LBA) medium, although there were slight differences, however, on cornmeal agar (CMA) medium, it was a shape of stellate without aerial mycelia. The colony shape on potato dextrose agar (PDA) medium was rough and irregular whereas the mycelial growth was slow, and some aerial mycelia were only produced in the middle of PDA medium. Optimum temperature for sporangial formation was 3$0^{\circ}C$, and zoospores were mostly released at $25^{\circ}C$ from the sporangia. Sporangia were more produced in C/Z solution with pH 5. 0~6.$0^{\circ}C$ than sterilized distilled water (DSW) and distilled water (DW), and zoospores were also released much more than other solutions. Eleven strawberry cultivars such as Reiko, Hokowase, Eyeberry, Akaneko, Sistakara, Toyonoka, Nyoho, Sulhong, Suhong, Myhong and Wonkyo #3104 revealed the disease incidence up to 88.9~100% by the leaf inoculation with mycelial disk. However, Nyoho and Suhong showed higher level of resistance against the pathogen by root inoculation.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2001.11a
• /
• pp.296-303
• /
• 2001

In nuclear power steam generators, high flow rates can induce vibration of the tubes resulting in fretting wear damage due to contacts between the tubes and their supports. In this paper the fretting wear tests and the sliding wear tests were performed using the steam generator tube materials of Inconel 690 against STS 304. Sliding tests with the pin-on-disk type tribometer were done under various applied loads and sliding speeds at air and water environment. Fretting tests were done under various vibrating amplitudes, applied normal loads and various temperatures. From the results of sliding and fretting wear tests, the wear of Inconel 690 can be predictable using the work rate model. Depending on normal loads and vibrating amplitudes, distinctively different wear mechanisms and often drastically different wear rates can occur. At room temperature, the wear coefficient K of Inconel 690 is 7.57${\times}$10$\^$13/Pa$\^$1/ in air and it is 1.93${\times}$10$\^$13/Pa$\^$1/ in water. At room temperature, it is found that the wear volume in air is more than in water. In water, the wear coefficient K at 50$^{\circ}C$ and 80$^{\circ}C$ is 4.35${\times}$10$\^$-13/Pa$^1$ and 5.81${\times}$10$\^$-13/Pa$^1$ respectively, Therefore, it is found that the wear volume extremely increases by increasing on temperature in water. This study shows that the dissolved oxygen with temperature increment increases and the wear due to fluidity is severe.

• Korean Journal of Veterinary Service
• /
• v.34 no.1
• /
• pp.37-43
• /
• 2011

This study was conducted to investigate the prevalence and genotypes of extended-spectrum ${\beta}$-lactamase (ESBL) in 377 Escherichia coli isolated from healthy and sick animals. Two isolates (0.5%), each of which were isolated from diseased swine and chicken, respectively, were confirmed as ESBL producing isolates by double disk synergy test, and showed a multidrug resistant phenotype. Minimum inhibitory concentration of cefotaxime for the two ESBL producing isolates were 3~4 times higher than those of ceftazidime, respectively. By PCR and sequencing, one isolate from swine have both $bla_{CTX-15}$ and $bla_{TEM-1}$, and one isolate from chicken have $bla_{CTX-15}$ and $bla_{TEM-116}$. Also, these genes were transferred to E. coli J53 by conjugation. These two isolates showed unrelated pulsed-field gel electrophoresis. To our knowledge, this is the first time that $bla_{TEM-116}$ gene was identified in E. coli isolated from animals in Korea. These results suggest more prudent use of third- generation cephalosporins, and surveillance and monitoring for ESBL producing E. coli in both animals and their environments should be necessary.

• Journal of Sensor Science and Technology
• /
• v.10 no.5
• /
• pp.314-319
• /
• 2001

In this study, the highly sensitive $CaSO_4$:Tm-PTFE TLDs has been fabricated for the purpose of measurement of high energy electron. $CaSO_4$:Tm phosphor powder was mixed with polytetrafluoroethylene(PTFE) powder and moulded in a disk type(diameter 8.5mm, thickness $90mg/cm^2$) by cold pressing. The batch uniformities were average deviation 3.1%. The TLDs were applied to measurement of absorbed dose distribution for high energy electron, the ranges were determined to be $R_{100}=14.5mm$, $R_{50}=24.1mm$ and $R_p=31.8mm$, respectively. The beam flatness were 4.5% as the variation of dose relative to the central axis over the central 80% of the field size at a maximum dose depth in a plane perpendicular to the central axis.

• Journal of Sensor Science and Technology
• /
• v.4 no.3
• /
• pp.22-29
• /
• 1995

Lithium ionic solid electrolyte was synthesized at $60^{\circ}C$ in $N_{2}$ ambience by sol-gel method, using tetraethyl orthosilcate, lithium methoxide, zirconium n-propoxide, and tributyle phosphate as precursors. The prepared material was dried and crushed into powder, and it was pressed into disk type samples. These samples were sintered at $900^{\circ}C{\sim}1100^{\circ}C$ for 50 hours. The physical characteristics of the samples were investigated by TG/DTA, SEM, AES and XRD methods. $CO_{2}$ sensor based on lithium ionic solid electrolyte was fabricated and its operational characteristics were measured. The sensing characteristics of the sensor sintered at $1000^{\circ}C$ shows the variation of e.m.f. about $35{\sim}63\;mV/decade$ for the variation of $CO_{2}$ concentration at $200^{\circ}C{\sim}300^{\circ}C$ of operating temperature, and good linearity for $300{\sim}6000\;ppm$.

• Journal of Fashion Business
• /
• v.22 no.2
• /
• pp.1-13
• /
• 2018

3D printing technology, which is expected to play a leading role within the Fourth Industrial Revolution, is becoming distinguished not only in the space, automotive, medical and engineering industries, but also in the area of design. The fashion and textile structures created by 3D printing technology were classified into three types - basic structure, unified structure, and a new physical structure. When traditional weaving, knitting, and stitching was reinterpreted through 3D printing, there were apparent limitations in reproducing the characteristics of fabric structures due to differences in the materials and structures of traditional textiles. New physical structures are being developed to break away from merely reproducing traditional textile structures, and to bring out the characteristics of 3D printing technology. As examples of new physical structures, there are the kinematics structure which utilizes the hinge method, mesostructure cellular material, and the N12 disk structure. Such techniques potentially open a new paradigm of fashion and textile structures. Some innovative aspects of 3D printing technology may result in changes in the methods of collaboration, manufacturing, and distribution. Designers are receiving help from specialists of various backgrounds to merge 3D printing technology to create original works. Also, 3D printing not only makes personalized custom designs available, but shortens the distribution channels, foretelling a change within the fashion and textile industry.

• The Journal of Advanced Prosthodontics
• /
• v.8 no.6
• /
• pp.449-456
• /
• 2016

PURPOSE. This in vitro study evaluated the effects of four different cements on the color attributes of a zirconia ceramic. MATERIALS AND METHODS. 40 zirconia ceramic disk specimens (0.5 mm thickness, 10 mm diameter, 0.1 mm cement space) were fabricated by a computer-aided design and computer-aided manufacturing system. The specimens were divided into 4 groups of 10 specimens and cemented to composite substrates using four different cements including: Glass Ionomer, Panavia F2.0, Zinc Phosphate, and TempBond. The $L^*$, $a^*$, and $b^*$ color attributes of the specimens were measured before and after cementation by a spectrophotometer. Additionally, ${\Delta}E$ values were measured to determine color changes for the groups and then compared with the perceptional threshold of ${\Delta}E=3.3$. Repeated Measures ANOVA, Tukey Post Hoc, Bonferroni, One-way ANOVA, and One-sample t-test tests were used to analyze the data. All tests were carried out at the 0.05 level of significance. RESULTS. Statistically significant differences were detected in the ${\Delta}E$ values for Zinc Phosphate (P<.0001) and TempBond (P<.0001) groups. However, there were no statistically significant differences in this respect for Glass Ionomer (P=.99) and Panavia F2.0 (P=1) groups. The means and standard deviations of the ${\Delta}E$ values for Glass Ionomer, Panavia F2.0, Zinc Phosphate, and Tempbond groups were $2.11{\pm}0.66$, $0.94{\pm}0.39$, $5.77{\pm}0.83$, and $7.50{\pm}1.16$ Unit, respectively. CONCLUSION. Within the limitations of this study, it was concluded that Zinc Phosphate and Tempbond cements affected the color attributes of the tested zirconia ceramic beyond the perceptional threshold. However, Glass Ionomer and Panavia F2.0 cements created acceptable color changes.

• The Bulletin of The Korean Astronomical Society
• /
• v.36 no.2
• /
• pp.113.2-113.2
• /
• 2011

We observed a low-mass pre-main sequence star, HBC722 (also known as $LkH{\alpha}$ 188 G4), with Camera for QUasars in EArly uNiverse (CQUEAN) attached to 2.1 Otto Struve telescope at McDonald Observatory, USA. HBC722 is a new FU orionis-type object in the direction of NGC7000/IC5070, which produced large amplitude optical outbursts (${\delta}V$=4.7 mag over one year) for a few months and reached the peak in 2010 September. We carried out the photometric observation in SDSS r,i, and z band in 2011 April, July and August to monitor the long term decrease of its brightness. We also made continuous observation in r-band for half night in July, and whole two nights in August to investigate short term variability which could be related to the rotation of the central star or the inner circumstellar disk. In this poster, we present a preliminary result of the photometric observation for HBC722.