• Tribology and Lubricants
• /
• 제33권5호
• /
• pp.220-227
• /
• 2017

In this work, carbon nanotube and nano-size alumina particle are exploited as additive for lubrication experiment. We used pin-on-disk type tribometer to investigate the tribological characteristics of lubricants with respect to additives and rotational speed. We conducted more than 15 trials of tribotests for two hours for each specimen to obtain stable and accurate frictional force and to create measurable wear track on the substrate. We conducted tests at the boundary/mixed lubrication regime to evaluate the influence of additives on the tribological characteristics. We found that the friction coefficient decreased as the rotational speed increased and as additives were added. In particular, the reduction of friction by adding additives was more significant at low rotational speed than at high rotational speed. We speculate that the additives helped to separate and protect the two contacting surfaces at low speed, while the influence of additives was not significant at high speed since sufficiently thick lubricant film was formed. The wear of the substrate was also reduced by adding additives to the lubricant. However, in contrast to friction, the amount of wear at high rotational speed was less when alumina particles were added to the lubricant than the amount of wear at low speed. We speculate that the increased wear at low rotational speed is as a result of the intermittent abrasive wear caused by alumina particles with uneven shape, while the reduced wear at high speed is as a result of sufficient film thickness which prevented the abrasive wear.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1998년도 제14회 학술발표회 논문개요집
• /
• pp.109-109
• /
• 1998

최근 들어 MOCVD 법으로 성장시킨 GaN, InGaN, AIGaN를 이용한 광소자 ( (LED, LD)와 전자소자(FET, MODFET)에 대한 관심이 고조되면서, MOCVD 법 을 이용한 GaN 중심의 질화물 반도체 성장에 관심이 집중되고 있다. 금번 실험에 사용된 MOCVD 장비는 수직형 MOCVD 장비이다. 특히, wafer c carner를 1$\alpha$)() rpm이상의 고속으로 회전시킬 수 있는 장치로서 원료 가스의 반웅 기 내에서의 흐름을 균일하게 하여 uniformity가 높은 질화물 반도체를 성장시킬 수 있다 .. GaN 에피충은 c-plane 사파이어를 기판으로 하여 11 00 "C 이상의 고온 에서 수소를 이용하여 기판을 cleaning하고, 500 "C 부근에서 핵생성충올 성장시 킨 후 1050 "C에서 trimethylgallium(TMGa)과 NI-h를 이용하여 성장시켰다. n n -GaN를 성장시키기 위해서는 SiH4을 사용하였으며, InGaN의 경우는 t trimethylindium(TMIn)을 In원 료 가스로 하여 635 - 725 "C 범 위 에 서 성 장시 켰 다. 성 장된 undoped GaN, n-GaN, InGaN는 X -ray di잔raction(XRD), H떠l m measurement, Photoluminescence(PU동올 이용하여 결정성과 전기적 및 광학적 특성올 고찰하였다 .. 2ttm 두께로 성장된 undoped G값V박막의 경우 Hall 측정결과 6 6 X lOI6/e며 정도의 낮은 도핑 농도를 보였으며, V!lII ratio(2500 - 5000)증가에 따라 결정성이 향상됨을 GaN (102)면의 X -ray e -rocking분석올 통하여 확인하 였다 .. n-GaN의 경우 SiH4양올 3 - 13 sccm으로 증가시킴에 따라 n -type 도명농 도가 선형적으로 증가하였고, 1017/c며 범위 내로 도평이 된 경우 상온에서 300 e마 N Ns 이상의 high mobility를 얻올 수 있었다 .. PL 관측 결과로부터 Si 도핑으로 인 하여 GaN bandedge emission이 강화됨을 알 수 있었다 .. InGaN 박막의 경우 성 장온도를 낮춤에 따라서 m의 양을 증가시킬 수 있었다. 또한 유량비(TMIn I T TMGa)가 1에 가까운 경 우에서도 온도를 635 "C 정도로 낮훈 경우 410 nm정도에 서 PL bandedge peak올 얻을 수 있었으며, 이 때의 반치폭은 50 meV정도의 낮 은 값을 보였다. 반치폭은 50 meV정도의 낮 은 값을 보였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.694-699
• /
• 2002

As the demand for slim laptops requires ion'-height optical disc drives, vibration problems of optical disc drives are of great concern. Additionally, with the decrease of a track width and a depth of focus in high density drives, studies on vibration resonance between mechanical parts become more important. From the vibration point of view, the performance of optical disc drives is closely related with the relative displacement between a disc and an objective lens which is controlled by servo mechanism. In other words, to read and write data properly, the relative displacement between an optical disc and an objective lens should be within a certain limit. The relative displacement is dependent on not only an anti-vibration mechanism design but also servo control capability. Good servo controls can make compensation for poor mechanisms, and vice versa. In a usual development process, robustness of the anti-vibration mechanism is always verified with the servo control of an objective lens. Engineers partially modify servo gain margin in case of a data reading error. This modification cannot correct the data reading error occasionally and the mechanism should be redesigned more robustly. Therefore it is necessary to verify a mechanism with respect to the possible servo gain plot. In this study we propose the experimental verification method far anti-vibration mechanism with respect to the existing servo gain plot. This method verifies axial vibration characteristics of optical disc drives on the basis of transmissibility. Using this method, we verified our mechanism and modified the mechanism for better anti-vibration characteristics.

• 한국식물병리학회지
• /
• 제14권6호
• /
• pp.646-650
• /
• 1998

Mycological characteristics of Phytophthora nicotianae var. nicotianae SPC10 (A1 type) causing Phytophthora rot of strawberry and the resistances of 11 strawberry cultivars against the pathogen were examined. Optimum temperature for the mycelial growth of the pathogen was obtained in the range of 30~35$^{\circ}C$, and the growth was completely stopped under 13$^{\circ}C$ or over 42$^{\circ}C$. Aerial mycelia were abundant on oatmeal agar (OMA), V-8 juice agar (V8A) and lima bean agar (LBA) medium, although there were slight differences, however, on cornmeal agar (CMA) medium, it was a shape of stellate without aerial mycelia. The colony shape on potato dextrose agar (PDA) medium was rough and irregular whereas the mycelial growth was slow, and some aerial mycelia were only produced in the middle of PDA medium. Optimum temperature for sporangial formation was 3$0^{\circ}C$, and zoospores were mostly released at $25^{\circ}C$ from the sporangia. Sporangia were more produced in C/Z solution with pH 5. 0~6.$0^{\circ}C$ than sterilized distilled water (DSW) and distilled water (DW), and zoospores were also released much more than other solutions. Eleven strawberry cultivars such as Reiko, Hokowase, Eyeberry, Akaneko, Sistakara, Toyonoka, Nyoho, Sulhong, Suhong, Myhong and Wonkyo #3104 revealed the disease incidence up to 88.9~100% by the leaf inoculation with mycelial disk. However, Nyoho and Suhong showed higher level of resistance against the pathogen by root inoculation.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2001년도 제34회 추계학술대회 개최
• /
• pp.296-303
• /
• 2001

In nuclear power steam generators, high flow rates can induce vibration of the tubes resulting in fretting wear damage due to contacts between the tubes and their supports. In this paper the fretting wear tests and the sliding wear tests were performed using the steam generator tube materials of Inconel 690 against STS 304. Sliding tests with the pin-on-disk type tribometer were done under various applied loads and sliding speeds at air and water environment. Fretting tests were done under various vibrating amplitudes, applied normal loads and various temperatures. From the results of sliding and fretting wear tests, the wear of Inconel 690 can be predictable using the work rate model. Depending on normal loads and vibrating amplitudes, distinctively different wear mechanisms and often drastically different wear rates can occur. At room temperature, the wear coefficient K of Inconel 690 is 7.57${\times}$10$\^$13/Pa$\^$1/ in air and it is 1.93${\times}$10$\^$13/Pa$\^$1/ in water. At room temperature, it is found that the wear volume in air is more than in water. In water, the wear coefficient K at 50$^{\circ}C$ and 80$^{\circ}C$ is 4.35${\times}$10$\^$-13/Pa$^1$ and 5.81${\times}$10$\^$-13/Pa$^1$ respectively, Therefore, it is found that the wear volume extremely increases by increasing on temperature in water. This study shows that the dissolved oxygen with temperature increment increases and the wear due to fluidity is severe.

• 한국동물위생학회지
• /
• 제34권1호
• /
• pp.37-43
• /
• 2011

This study was conducted to investigate the prevalence and genotypes of extended-spectrum ${\beta}$-lactamase (ESBL) in 377 Escherichia coli isolated from healthy and sick animals. Two isolates (0.5%), each of which were isolated from diseased swine and chicken, respectively, were confirmed as ESBL producing isolates by double disk synergy test, and showed a multidrug resistant phenotype. Minimum inhibitory concentration of cefotaxime for the two ESBL producing isolates were 3~4 times higher than those of ceftazidime, respectively. By PCR and sequencing, one isolate from swine have both $bla_{CTX-15}$ and $bla_{TEM-1}$, and one isolate from chicken have $bla_{CTX-15}$ and $bla_{TEM-116}$. Also, these genes were transferred to E. coli J53 by conjugation. These two isolates showed unrelated pulsed-field gel electrophoresis. To our knowledge, this is the first time that $bla_{TEM-116}$ gene was identified in E. coli isolated from animals in Korea. These results suggest more prudent use of third- generation cephalosporins, and surveillance and monitoring for ESBL producing E. coli in both animals and their environments should be necessary.

• 센서학회지
• /
• 제10권5호
• /
• pp.314-319
• /
• 2001

$CaSO_4$:Tm 열형광체 분말 20wt%를 PTFE와 혼합하여 직경 8.5mm, 두께 $90mg/cm^2$로 압축 성형한 후 중합하여 디스크 형태의 $CaSO_4$:Tm-PTFE TLD소자를 제작하였다. $^{60}Co$ 원격조사장치를 이용하여 0.5Gy의 $\gamma$-선을 조사한 TLD 소자의 균일성은 3.1%로 우수하였다. 이 중에서, 선별한 TLD를 이용하여 고에너지 전자선에 대한 polystyrene 팬톰에서의 흡수선량 분포를 측정하여 최대선량깊이, 50%선량깊이 및 실용비정의 값을 구할 수 있었으며, 조사야 내의 beam 평탄도는 4.5%로 나타났다. 이들 값은 dosimetry system으로 측정한 결과와 비교하여 다소 증가하는 경향을 나타내었다.

• 센서학회지
• /
• 제4권3호
• /
• pp.22-29
• /
• 1995

$60^{\circ}C$의 질소 분위기에서 tetraethyl orthosilcate, lithium methoxide, zirconium n-propoxide 그리고 tributyle phosphate를 전구체로 써서 sol-gel법으로 Li 이온-고체 전해질을 합성하였다. 합성한 물질을 건조하고 분쇄하여, 이를 가압 성형하여 원반형 시편들을 제조하였다. 시편들을 $900^{\circ}C{\sim}1100^{\circ}C$에서 50시간 열처리하였다. 시편들의 물성을 TG/DTA, SEM, AES 및 XRD 법으로 조사하였다. Li 이온 이온-고체 전해질을 이용한 $CO_{2}$ 가스 감지 소자를 제작하고 그 동작 특성을 측정하였다. 제작된 감지 소자 중에서 $1000^{\circ}C$에서 열처리한 경우, 동작 온도가 $200^{\circ}C{\sim}300^{\circ}C$ 일 때, $CO_{2}$ 농도 변화에 대해 $35{\sim}63mV/decade$의 기전력 변화를 나타내었고, $300{\sim}6000 ppm$까지 선형성이 우수하였다.

• 패션비즈니스
• /
• 제22권2호
• /
• pp.1-13
• /
• 2018

3D printing technology, which is expected to play a leading role within the Fourth Industrial Revolution, is becoming distinguished not only in the space, automotive, medical and engineering industries, but also in the area of design. The fashion and textile structures created by 3D printing technology were classified into three types - basic structure, unified structure, and a new physical structure. When traditional weaving, knitting, and stitching was reinterpreted through 3D printing, there were apparent limitations in reproducing the characteristics of fabric structures due to differences in the materials and structures of traditional textiles. New physical structures are being developed to break away from merely reproducing traditional textile structures, and to bring out the characteristics of 3D printing technology. As examples of new physical structures, there are the kinematics structure which utilizes the hinge method, mesostructure cellular material, and the N12 disk structure. Such techniques potentially open a new paradigm of fashion and textile structures. Some innovative aspects of 3D printing technology may result in changes in the methods of collaboration, manufacturing, and distribution. Designers are receiving help from specialists of various backgrounds to merge 3D printing technology to create original works. Also, 3D printing not only makes personalized custom designs available, but shortens the distribution channels, foretelling a change within the fashion and textile industry.

• The Journal of Advanced Prosthodontics
• /
• 제8권6호
• /
• pp.449-456
• /
• 2016

PURPOSE. This in vitro study evaluated the effects of four different cements on the color attributes of a zirconia ceramic. MATERIALS AND METHODS. 40 zirconia ceramic disk specimens (0.5 mm thickness, 10 mm diameter, 0.1 mm cement space) were fabricated by a computer-aided design and computer-aided manufacturing system. The specimens were divided into 4 groups of 10 specimens and cemented to composite substrates using four different cements including: Glass Ionomer, Panavia F2.0, Zinc Phosphate, and TempBond. The $L^*$, $a^*$, and $b^*$ color attributes of the specimens were measured before and after cementation by a spectrophotometer. Additionally, ${\Delta}E$ values were measured to determine color changes for the groups and then compared with the perceptional threshold of ${\Delta}E=3.3$. Repeated Measures ANOVA, Tukey Post Hoc, Bonferroni, One-way ANOVA, and One-sample t-test tests were used to analyze the data. All tests were carried out at the 0.05 level of significance. RESULTS. Statistically significant differences were detected in the ${\Delta}E$ values for Zinc Phosphate (P<.0001) and TempBond (P<.0001) groups. However, there were no statistically significant differences in this respect for Glass Ionomer (P=.99) and Panavia F2.0 (P=1) groups. The means and standard deviations of the ${\Delta}E$ values for Glass Ionomer, Panavia F2.0, Zinc Phosphate, and Tempbond groups were $2.11{\pm}0.66$, $0.94{\pm}0.39$, $5.77{\pm}0.83$, and $7.50{\pm}1.16$ Unit, respectively. CONCLUSION. Within the limitations of this study, it was concluded that Zinc Phosphate and Tempbond cements affected the color attributes of the tested zirconia ceramic beyond the perceptional threshold. However, Glass Ionomer and Panavia F2.0 cements created acceptable color changes.