• 대한기계학회논문집A
• /
• 제29권1호
• /
• pp.88-95
• /
• 2005

This paper presents a design scheme of model reference adaptive control incorporating a Neural Network for a pneumatic servo system. The parameters of discrete-time model of plant are estimated by using the recursive least square method. Neural Network is utilized in order to compensate the nonlinear nature of plant such as compressibility of air and frictions present in cylinder. The experiment of a trajectory tracking control using the proposed control scheme has been performed and its effectiveness has been proved by comparing with the results of a model reference adaptive control.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1990년도 하계학술대회 논문집
• /
• pp.60-63
• /
• 1990

This note presents a direct adaptive pole assignment control for general discrete, linear, time-invariant, nonmimum phase system.Controller parameters are estimated from the recursive least-squares algorithm, and some additional auxiliary parameters are obtained from aset of recursive equations based on a certain polynomial identity which is derived from the pole assignment equation and the Bezout identity. This scheme increase the numerical stability of the auxiliary parameters, and guarantees local convergence without any extra conditions for the external input. The effectiveness of the proposed scheme is demonstrated by the computer simulation.

• 제어로봇시스템학회논문지
• /
• 제9권1호
• /
• pp.10-21
• /
• 2003

During seek operation in disk drives, the recording head is moved toward desired track by seek servo controller and then is settled onto the center of the desired track by settling servo controller. If the head speed at the start of settling servo control is not slow, it may produce overshoot relative to the center of track and thus extend the settling time. The degradation in settling performance will be more severe as the track width becomes smaller for higher density of data storage. We design a new settling servo controller for minimizing settling time based on the pole-zero cancellation. In order to cancel slow poles in settling response, we apply discrete pulse signals to the system in addition to the state feedback control. For exact pole-zero cancellation, we consider the dynamics of power amplifier used for actuator current regulation and the effects of delay in control action. In addition, we present system parameter identification algerian for the robustness of our controller to system parameter variation. In order to demonstrate the practical use of our controller, we present experimental results obtained by using a commercially available disk drive.

• 소음진동
• /
• 제6권5호
• /
• pp.567-574
• /
• 1996

This paper concerns an articulated space robot with flexible links. The equations of its motion are derived by means of the Lagrangian mechanics. Assuming that magnitude of elastic motions are relatively small, the perturbation approach is taken to separate the original equations of motion into linear and nonlinear equations. Th effect the desired payload motion, open loop control inputs are first determined based on the nonlinear equations. One the other hand, in order to reduce the positional errors during the maneuver, vibration suppression is actively done with a feedforward control for disturbance cancellation to some extent. Additionally, for performance robustness against residual disturbance, an LQ control modified to have a prescribed degree of stability is applied based on the linear equations. Measurement equations are formulated to be used for the maximum likelihood estimator to reconstruct states from the original robot equations of motion. Finally, numerical simulations show effectiveness of the proposed control design scheme.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.647-651
• /
• 1992

This paper presents a model-based control scheme for a robot manipulator to track a desired trajectory as closely as possible in spite of a wide range of manipulator motions and parameter uncertainties of links and payload. The scheme has two components: a nominal control and a variational control. The nominal control, generated from direct calculation of the manipulator dynamics along a desired trajectory, drives the manipulator to a neighborhood of the trajectory. Then a discrete-time PID regulator is designed based on the linearized dynamic model and Linear Quadratic(LQ) method, which generates the variational control that regulates perturbations in the vicinity of the desired trajectory.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2018년도 전력전자학술대회
• /
• pp.344-345
• /
• 2018

In order to alleviate the negative impacts of harmonically distorted grid condition on grid-connect inverters, an optimal control design-based gain selection scheme of an LCL-filtered grid-connected inverter and its ability to compensate selective harmonics are presented in this paper. By incorporating resonant terms into the control structure in the state-space to provide infinity gain at selected frequencies, the proposed control offers an excellent steady-state response even under distorted grid voltage. The proposed control scheme is achieved by using a state feedback controller for stabilization purpose and by augmenting the resonant terms as well as intergral term into a control structure for reference tracking and harmonic compensation. Furthermore, the optimal linear quadratic control approach is adopted for choosing an optimal feedback gain to ensure an asymptotic stability of the whole system. A discrete-time full state observer is also introduced into the proposed control scheme for the purpose of reducing a total number of sensors used in the inverter system. The simulation results are given to prove the effectiveness and validity of the proposed control scheme.

• International Journal of Control, Automation, and Systems
• /
• 제6권3호
• /
• pp.378-385
• /
• 2008

This paper aims to present a polynomial approach to the steady-state optimal filtering for delayed systems. The design of the steady-state filter involves solving one polynomial equation and one spectral factorization. The key problem in this paper is the derivation of spectral factorization for systems with delayed measurement, which is more difficult than the standard systems without delays. To get the spectral factorization, we apply the reorganized innovation approach. The calculation of spectral factorization comes down to two Riccati equations with the same dimension as the original systems.

• Journal of Power Electronics
• /
• 제13권3호
• /
• pp.419-428
• /
• 2013

The modular multilevel cascade converter (MMCC) is a new family of multilevel power converters with modular realization and a cascaded pattern for submodules. The MMCC family can be classified by basic configurations and submodule types. One member of this family, the Hexverter, is configured as Double-Delta Full-Bridge (DDFB). It is a novel multilevel AC/AC converter with direct power conversion and comparatively fewer required components. It is appropriate for connecting two three-phase systems with different frequencies and driving an AC motor directly from a utility grid. This paper presents the dq model of a Hexverter with both of its AC systems by state-space representation, which then simplifies the continuous time-varying model into a periodic discrete time-invariant one. Then a generalized multivariable optimal control strategy for regulating the Hexverter's independent currents is developed. The resulting control structure can be adapted to other MMCCs and is flexible enough to include other control criterion while guaranteeing the original controller performance. The modeling method and control design are verified by simulation results.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 G
• /
• pp.2849-2852
• /
• 1999

This paper describes the fuzzy PD controller using simplified indirect inference method. First, the fuzzy PD controller is derived from the conventional continuous time linear PD controller. Then the fuzzification, control-rule base, and defuzzification using SIIM in the design of the fuzzy controller are discussed in detail. The resulting controller is a discrete time fuzzy version of the conventional PD controller. which has the same linear structure. but are nonlinear functions of the input signals. The proposed controller enhances the self-tuning control capability. particularly when the process to be controlled is nonlinear. As the SIIM is applied, the fuzzy Inference results can be calculated with splitting fuzzy variables into each action component and are determined as the functional form of corresponding variables. So the Proposed method has the capability of the high speed inference and extending the fuzzy input variables easily. Computer simulation results have demonstrated the superior to the control Performance of the one Proposed by D. Misir et at. Final)y. we simulated the contour control of the X-Y tables with direct control strategies using the proposed fuzzy PD controller.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.1545-1548
• /
• 1991

In this note, we consider a robust linear shift-invariant feedback compensator design for discrete-time multivariable systems which have both matched and mismatched uncertainties. In order to attack the problem of designing robust compensators guaranteeing uniform ultimate boundedness of every closed-loop system response within a neighborhood of the zero state based solely on the knowledge of the upper norm-bounds of uncertainties, we use an approach which is effective on studying augmented feedback control systems with both mismatched and matched uncertainties. We draw some robust stability conditions using the approach and give an example.