• Journal of Ocean Engineering and Technology
• /
• v.22 no.3
• /
• pp.71-75
• /
• 2008

This paper illustrates haw $Y_2O_3$ contributes to crack-healing strengths as a function of crack-healing temperature and the additive amount. In investigating mechanical properties, the indentation fracture method is very simple and useful, but careful attention must be paid to the statistical data processing because data may be scattered excessively, especially for brittle materials. To estimate accurate AE signal properties we applied the useful time-frequency method with a discrete wavelet analysis algorithm. In experiments, three kinds of specimens were prepared. After the specimens were indented by a Vickers indentor, they were heat-treated and crack-healed to evaluate bending strength and the AE signal. With higher amounts of the additive powder, as 1, 3, or 5% wt. of $Y_2O_3$, the concentrative tendency of dominant frequency trended toward lower frequency groups. The $Al_2O_3$ ceramic with 3% wt. of $Y_2O_3$ was judged most suitable because it demonstrated superior crack-healing ability and relative concentration on the highest frequency group.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.29 no.5
• /
• pp.220-230
• /
• 2017

In this study we apply and compare a variety of numerical methods for calculating residence time distribution in decay tanks, a major design component in the for reducing N-16 radioactivity. Our research group has used a streamlined method using user-defined particle numbers. However, this streamlined method has several problems, including low exiting particle ratios, particle diminishing, and unphysical time distribution, among others. We utilize three numerical methods to establish residence time and time distribution (streamlined, discrete phase method [DPM], and user defined scalar [UDS]) and subsequently compare the averaged results of each. The three tests demonstrate the flow features within the decay tanks, which are then numerically simulated to enable comparison. We conclude that although each simulation predicts similar time averages, the UDS methodology provides a smoother time distribution and tracer contour plots at specific times.

• IE interfaces
• /
• v.19 no.1
• /
• pp.43-52
• /
• 2006

In order to make best use of NC machine tools with minimal labor costs, they need to be in operation 24 hours a day without being attended by human operators except for setup and tool changes. Thus, unattended machining is becoming a dream of every modern machine shop. However, without a proper mechanism for real-time monitoring of the machining processes, unattended machine could lead to a disaster. Investigated in this paper are ways to using PC camera as a real-time monitoring system for unattended NC milling operations. This study defined five machining states READY, NORMAL MACHINING, ABNORMAL MACHINING, COLLISION and END-OF-MACHINING and modeled them with DEVS (discrete event system) formalism. An image change detection algorithm has been developed to detect the table movements and a flame and smoke detection algorithm to detect unstable cutting process. Spindle on/off and cutting status could be successfully detected from the sound signals. Initial experimentation shows that the PC camera could be used as a reliable monitoring system for unattended NC machining.

• Korean Journal of Materials Research
• /
• v.15 no.9
• /
• pp.566-576
• /
• 2005

This paper describes an ab Initio study on interface energies, misfit strain energies, and electron structures at coherent interfaces Fe(bcc structure)/MCs(NaCl structure M=Ti, Zr, Hf). The interface energies at relaxed interfaces Fe/TiC, Fe/ZrC and Fe/HfC were 0.263, 0.153 and $0.271 J/m^2$, respectively. It was understood that the dependence of interface energy on the type of carbide was closely related to changes of the binding energies between Fe, M and C atoms before and after formation of the interfaces Fe/MCs with the help of the DLP/NNBB (Discrete Lattice Plane/ Nearest Neighbour Broken Bond) model and data of the electron structures. The misfit strain energies in Fe/TiC, Fe/ZrC and Fe/HfC systems were 0.390, 1.692 and 1.408 eV per 16 atoms(Fe: 8 atoms and MC; 8 atoms). More misfit energy was generated as difference of lattice parameters between the bulk Fe and the bulk MCs increased.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.374-374
• /
• 2018

프로그래밍 언어로 개발된 프로그램들은 최종 사용자 입장에서 입력과 출력이 불편하다. 또한, 모의 결과를 분석하기 위하여 그래프를 작성하는 소프트웨어를 이용하면 시간이 오래 걸린다. 본 연구에서는 기 개발된 용수 감량공급 기준곡선을 반영한 단일 댐 모의 운영 모형을 최종 사용자가 쉽게 활용할 수 있도록 사용자 편의 환경을 개발한 것에 대해 소개하고자 한다. 용수 감량공급 기준곡선을 반영한 단일 댐 모의 운영의 사용자 편의 환경은 미국의 GoldSim Technology Group에서 개발한 GoldSim을 이용하여 개발하였다. 개발된 사용자 편의 환경에는 단일 댐 모의 운영에 필요한 여러 입력 자료를 쉽게 입력할 수 있도록 하였다. 단일 댐 모의 운영 입력 자료에는 월별 기본계획공급량, 가뭄 단계별 용수 감량공급 비율, 과거 유입량 시계열, 갈수 빈도 유입량 시계열, 가뭄 단계별 감량공급 실행 저수량, 초기 저수량, 저수용량 등이 있다. 개발된 모형의 초기값은 합천댐의 자료가 입력되어 있으나, 입력자료를 변경하여 다른 다목적댐의 모의 운영에 활용이 가능하다. 단일 댐 모의 운영 결과로서 모의 기간 내 발생한 용수별 용수 공급 부족량과 감량공급 일수를 확인가능하다. 또한, 단일 댐 모의 운영 결과를 다양한 그래프로 출력 할 수 있다. 출력 가능한 시계열 그래프는 사용자가 입력한 용수 감량공급 기준곡선, 모의 시 사용한 유입량 시계열, 가뭄 단계, 용수 공급량, 저수량이다. 연구의 사례와 같이 GoldSim을 활용하면 연구개발의 편의 환경을 별도의 편의 환경 개발자를 거치지안고 과학 기술자가 직접 개발할 수 있다.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.15 no.3
• /
• pp.109-114
• /
• 2005

On the research for constructing secure group-oriented proxy signature schemes, there are several proposals of threshold proxy signature schemes which combine the notions of proxy signature with threshold signature. Recently, Hsu and Wu proposed a threshold proxy signature scheme which uses a self-certified public key based on discrete logarithm problem. In this paper, we show that this scheme is vulnerable to original signer's forgery attack. So our attack provides the evidence that this scheme does not satisfy nonrepudiation property.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.35 no.6
• /
• pp.467-473
• /
• 2009

Purpose: The aim of this study is to compare volume and revascularization of autogenous block bone grafts in simultaneously cortical perforation of recipient beds and grafts, and only cortical perforation of recipient beds. Materials and methods: Two block bone in 8mm diameter was harvested in both skull using trephine bur on 20 New Zealand white rabbits. Harvested block bone was grafted on both inferior border of mandible. On the left side(experimental side), cortical bone of recipient beds and graft were perforated, and on the right side(control side), the only recipient bed was perforated. The rabbits had been sacrificed and infused the India ink for the observation of revascularization at 20 day and 40 day after surgery. The specimens were processed for H-E staining and quantitative analysis(independent t-test, p<0.01) was made under an optical microscope. In additional, specimens were processed for the observation of revascularization. Results: After 20 days, more bone volume was observed in experimental group, but no significant difference between two groups(p=0.106). There were significantly more bone volume in the experimental group at 40 days after surgery(p<0.01). After 20 days, more discrete vascular sprouts were observed in experimental side, but no difference at 40 days after surgery. Conclusion: We conclude that the cortical perforation of both the recipient beds and grafts improve revascularization at early stage and overall graft persistence.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.21 no.4
• /
• pp.16-22
• /
• 2013

In this study, we propose the method of optimally changing material of BIW for minimizing weight while satisfying vehicle requirements on static stiffness. First, we formulate a material selection optimization problem. Next, we establish the CAE procedure of evaluating static stiffness. Then, to enhance the efficiency of design work, we integrate and automate the established CAE procedure using a commercial process integration and design optimization (PIDO) tool, PIAnO. For effective optimization, we adopt the approach of metamodel based approximate optimization. As a sampling method, an orthogonal array (OA) is used for selecting sampling points. The response values are evaluated at the sampling points and then these response values are used to generate a metamodel of each response using the linear polynomial regression (PR) model. Using the linear PR model, optimization is carried out an evolutionary algorithm (EA) that can handle discrete design variables. Material optimization result reveals that the weight is reduced by 44.8% while satisfying all the design constraints.

• Journal of Plant Biotechnology
• /
• v.46 no.4
• /
• pp.255-273
• /
• 2019

Orchids are indispensable to the floriculture industry due to their unique floral organization. The flowers have two outer whorls of tepals including a lip (labellum), and two inner whorls, pollinia and gynostemiun (column). The floral organization and development is controlled at the molecular level, mainly by the MADS-box gene family, comprising homeotic genes divided into type I and type II groups. The type I group has four sub-groups, Mα, Mβ, Mγ, and Mδ, playing roles in seed, embryo, and female reproductive organ development; the type II group genes form classes A, B, C, D, and E, which are a part of the MIKC^C subgroup with specific roles in florigenesis and organization. The coordinated functioning of these classes regulates the development of various floral whorls. The availability of genome and transcriptome sequence data for Phalaenopsis equestris offers an opportunity to validate the ABCDE model of flower development. Hence, this study sought to characterize the MADS-box gene family and elucidate of the ABCDE model. A total of 48 identified MADS-box proteins, including 20 type I [Mα (12), Mγ (8)] and 28 type II [MIKC^C (27), MIKC*(1)] members, were characterized for physico-chemical features and domains and motifs organization. The exon-intron distribution and the upstream cis-regulatory elements in the promoter regions of MADS-box genes were also analysed. The discrete pace of duplication events in type I and type II genes suggested differential evolutionary constraints between groups. The correlation of spatio-temporal expression pattern with the presence of specific cis-regulatory elements and putative protein-protein interaction within the different classes of MADS-box gene family endorse the ABCDE model of floral development.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.21 no.5
• /
• pp.8-14
• /
• 2013

In this study, we propose the method of optimally selecting material of front pillar (A-pillar) and package tray for minimizing weight while satisfying vehicle requirements on static stiffness and dynamic stiffness. First, we formulate a material selection optimization problem. Next, we establish the CAE procedure of evaluating static stiffness and dynamic stiffness. Then, to enhance the efficiency of design work, we integrate and automate the established CAE procedure using a commercial process integration and design optimization (PIDO) tool, PIAnO. For effective optimization, we adopt the approach of metamodel based approximate optimization. As a sampling method, an orthogonal array (OA) is used for selecting sampling points. The response values are evaluated at the sampling points and then these response values are used to generate a metamodel of each response using the radial basis function regression (RBFr). Using the RBFr models, optimization is carried out an evolutionary algorithm that can handle discrete design variables. Material optimization result reveals that the weight is reduced by 49.8% while satisfying all the design constraints.