• Korean Journal of Applied Biomechanics
• /
• v.33 no.3
• /
• pp.94-100
• /
• 2023

Objective: Few studies have investigated alterations of ground reaction force (GRF) in individuals with chronic ankle instability (CAI) compared with lateral ankle sprain (LAS) copers and healthy controls during walking. This study aimed to investigate differences in GRF variables among the CAI, LAS coper, and control groups. Method: Eighteen individuals with CAI, 18 LAS copers, and 18 healthy controls were recruited for this study. All participants walked on 8-m walkway with a force plate three times. GRF data during stance phase were extracted and analyzed. The analysis of variance and ensemble curve analysis were used for statistical analyses of discrete points and time-series data respectively. Results: The CAI group showed a greater loading rate (LR) and a shorter time to impact peak force than the other groups, as well as decreased vGRF from 56% to 65% in the stance phase than the control group. No significant differences were noted in the other variables. Conclusion: Based on these findings, individuals with CAI should enhance their ability to create propulsion during the push-off phase and spend more time absorbing GRF to decrease the LR, which is considered one of risk factors for overuse injury and ankle osteoarthritis.

• International conference on construction engineering and project management
• /
• 2015.10a
• /
• pp.221-225
• /
• 2015

To hoist construction workers to their working space is directly related to the productivity of building construction since hoisting tasks are carried out during the working time. In order to reduce hoisting time in the condition that the number of construction lift-cars is limited, various types of the lift-cars group operation plans such as zoning and sky-lobby have been applied. However, previous researches on them cannot be compared in the performance due to their methodological limitation, discrete-event simulation methods, and cannot be find better solution to increase the performance. Therefore, this research proposed the simulation-based optimization model combining the agent-based simulation method to the scatter search optimization methods. Using the proposed model, this paper carried out the comparison analysis on the performance of typical operation plans and also optimize an operation plans by controlling the service range of lift-cars, the size and number of service zones. In this case study, it is verified that better alternatives than typical operation plans can be exists and it is possible to increase the productivity of building construction.

• Clinical and Experimental Reproductive Medicine
• /
• v.30 no.1
• /
• pp.57-64
• /
• 2003

Objective : We investigate the effects of multiple attempts of embryo transfer because of retained embryos in the catheter and of contaminated mucus on the transferred catheter. Materials and Methods: We respectively analysed data between November 1998 and August 2002 from 305 patients of 369 cycles who underwent IVF-ET. Of these patients, 47 patients of 50 cycles (Group 2) were required multiple trial of embryo transfer. They were compared with an age-matched control groups (Group 1) with female factor infertility. Pearson's $?^2$ and Fisher's tests were used to compare proportions between discrete variables. Noncategorical data were compared using t-test. Statistical significance was set at p<0.05. Results: Embryos were significantly more likely to be retained when catheter was contaminated with mucus (Group 1: 22.4%; Group 2: 44.0%). The clinical pregnancy rates, however, for the contaminated mucus or not, were 46.8%, 43.5% respectively. There was no significant difference clinical pregnancy rate between those who had all their embryos transferred at the first attempt (45.4%) and those who required more than one attempt (48.0%). Conclusions: Contaminated mucus in the catheter is associated with failed embryo transferred at the first attempt. Embryo transfers, however, that are repeated attempts do not adversely affect pregnancy rates following IVF-ET.

• Journal of Welding and Joining
• /
• v.31 no.6
• /
• pp.50-57
• /
• 2013

Characterization of microstructures and cryogenic mechanical properties of electro beam (EB) welds between cast and forged Inconel 718 superalloys has been investigated. Optimal EBW condition was found in the beam current range of 36~39 mA with the constant travel speed of 12 mm/s and arc voltage of 120 kV for 10 mm-thick specimens. Electron beam current lower than 25 mA caused to occur the liquation microfissuring in cast-side heat affected zone (HAZ) of EB welds. The HAZ liquation microfissure was found on the liquated grain boundaries with resolidified ${\gamma}/Laves$ and ${\gamma}/NbC$ eutectic constituents. EBW produced welds showing a fine dendritic structure with relatively discrete Laves phase due to fast cooling rate. After post weld aging treatment, blocky Laves phase and formation of ${\gamma}^{\prime}+{\gamma}^{{\prime}{\prime}}$ strengtheners were observed. Presence of primary strengthener and coarse Laves particles in PWHT weld may cause to reduce micro-plastic zone ahead of a crack, leading to a significant decrease in Charpy impact toughness at $-196^{\circ}C$. Fracture initiation and propagation induced by Charpy impact testing were discussed in terms of the dislocation structures ahead of crack arisen from the fractured Laves phase.

• 한국터널공학회:학술대회논문집
• /
• 2005.04a
• /
• pp.348-358
• /
• 2005

Although the evaluation of the mechanical properties and behavior of discontinuous rock masses is very important for the design of underground openings, it has always been considered the most difficult problem. One of the difficulties in describing the rock mass behavior is assigning the appropriate constitutive model. This limitation may be overcome with the progress in discrete element software such as PFC, which does not need the user to prescribe a constitutive model for rock mass. Instead, the micro-scale properties of the intact rock and joints are defined and the macro-scale response results from those properties and the geometry of the problem. In this paper, a $30m{\times}30m{\times}30m$ jointed rock mass of road tunnel site was analyzed. A discrete fracture network was developed from the joint geometry obtained from core logging and surface survey. Using the discontinuities geometry from the DFN model, PFC simulations were carried out, starting with the intact rock and systematically adding the joints and the stress-strain response was recorded for each case. With the stress-strain response curves, the mechanical properties of discontinuous rock masses were determined and compared to the results of empirical methods such as RMR, Q and GSI. The values of Young's modulus, Poisson's ratio and peak strength are almost similar from PFC model and Empirical methods. As expected, the presence of joints had a pronounced effect on mechanical properties of the rock mass. More importantly, the mechanical response of the PFC model was not determined by a user specified constitutive model.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.8
• /
• pp.101-112
• /
• 1999

In this paper, the codebook design method of VQ (vector quantization) is proposed an method to extract feature data of image for multimedia information searching. Conventional VQ codebook design methods are unsuitable to extract the feature data of images because they have too much computation time, memory for vector decoding and blocking effects like DCT (discrete cosine transform). The proposed design method is consists of the feature extraction by WT (wavelet transform) and the data group divide method by PCA (principal component analysis). WT is introduced to remove the blocking effect of an image with high compressing ratio. Computer simulations show that the proposed method has the better performance in processing speed than the VQ design method using SOM (self-organizing map).

• Korean Journal of Remote Sensing
• /
• v.27 no.3
• /
• pp.329-338
• /
• 2011

The time-series normalized difference vegetation index (NDVI) product has proven to be a powerful tool to investigate the phenological information because it can monitor the change of the forests with very high time-resolution, This study described the application of the DFT analysis over the 9 year MODIS data for the identification of the two types of vegetation cover, Pinus densiflora(Pd) and Querqus mongolica(Qm) which are dominant species of evergreen and broadleaved deciduous forest, respectively, The total number of samples was 5148 reference cycles which consist of 2160 Pd and 2988 Qm. They were extracted from the pixel-based MODIS scenes over the 9 years from 2000 to 2008 of South Korea. The DFT analysis was mainly focused on the 0th and $1^{st}$ harmonic components, each of which represents the mean value and the variation amplitude of the NDVI over the years, respectively. The $0^{th}$ harmonic values of the vegetation Pd and Qm averaged over the 9 years were 0.74 and 0.65, respectively. This implies that Pd has a higher NDVI than Qm. Similarly obtained $1^{st}$ harmonic values of Pd and Qm were 0.19 and 0.27, respectively. This can be intuitively understood considering that the seasonal variation of Qm is much larger than Pd. This distinctive difference of the $1^{st}$ harmonic value has been used to identify evergreen and deciduous forests. Overall agreement between the Fourier analysis-based map and the actal vegetation map has been estimated to be as high as 75%. This study found that the DFT analysis can be a concise and repeatable method to separate and trace the changes of evergreen and deciduous forest using the annual NDVI cycles.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.44 no.5
• /
• pp.112-117
• /
• 2007

This paper presents specialized DSP instructions and their hardware architecture for audio coding algorithms, such as the MPEG-2/4 Advanced Audio Coding(AAC), Dolby AC-3, MPEG-2 Backward Compatible(BC), etc. The proposed architecture is specially designed and optimized for the MDCT/IMDCT(Inverse Modified Discrete Cosine Transform), and Huffman decoding of the AAC decoding algorithm. Performance comparisons show a significant improvement compared with TMS320C62x and ASDSP21060 for the MDCT/IMDCT computation. In addition, the dedicated Huffman decoding accelerator performs decoding and preparing operand in only one cycle. The proposed DPU(Data Processing Unit) consists of 107,860 gates and achieves 150 MIPS.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.12B
• /
• pp.2359-2368
• /
• 1999

In this paper we propose a 2D FLIR image-based 3D target recognition system which performs group-to-ground vehicle recognition using the target contour and its degree of reliability extracted from FLIR image. First we extract target from background in FLIR image. Then we define contour points of the extracted target which have high edge gradient magnitude and brightness value as reliable contour point and make reliable contour by grouping all reliable contour points. After that we extract corresponding reliable contours from model contour image and perform comparison between scene and model features which are calculated by DST(discrete sine transform) of reliable contours. Experiment shows that the proposed algorithm work well and even in case of imperfect target extraction it showed better performance then conventional 2D contour-based matching algorithms.

• Journal of the Korean Mathematical Society
• /
• v.33 no.3
• /
• pp.625-639
• /
• 1996

A convex $RP^n$-structure on a smooth anifold M is a representation of M as a quotient of a convex domain $\Omega \subset RP^n$ by a discrete group $\Gamma$ of collineations of $RP^n$ acting properly on $\Omega$. When M is a closed surface of genus g > 1, then the equivalence classes of such structures form a moduli space $B(M)$ homeomorphic to an open cell of dimension 16(g-1) (Goldman [2]). This cell contains the Teichmuller space $T(M)$ of M and it is of interest to know what of the rich geometric structure extends to $B(M)$. In [3], a symplectic structure on $B(M)$ is defined, which extends the symplectic structure on $T(M)$ defined by the Weil-Petersson Kahler form.