• 제목/요약/키워드: discharge cleaning

검색결과 92건 처리시간 0.026초

마그네트론 스퍼터링을 이용한 Al과 Al-Si 박막의 제조 및 특성

  • 박혜선;정재인;양지훈;정재훈;송민아
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
    • /
    • pp.309-309
    • /
    • 2011
  • 알루미늄 합금은 경량성과 우수한 가공성, 내식성 등의 특성을 지니고 있고 구리나 아연, 마그네슘, 실리콘 등과 쉽게 합금화 가능하다. 또한 알루미늄과 그 합금은 자동차, 항공기, 건축물, 레저 그리고 가전용품의 재료로도 널리 사용되고 있다. 특히 Al에 Si을 소량 첨가하게 되면 내식성과 반사율이 향상되는 것으로 알려져 있다. 본 연구에서는 마그네트론 스퍼터링으로 Al, Al-Si 박막을 코팅하여 박막의 미세구조와 가시광선의 반사율을 관찰하였다. 시편은 Si wafer를 사용하였으며 알코올과 아세톤으로 각각 10분간 초음파 세척한 후 진공장비에 장착하여 Ar 분위기에서 glow discharge로 in-situ cleaning을 약 30분간 실시하였다. 시편청정이 끝나면 ~10-6 Torr 까지 진공배기를 실시하고 Ar 가스를 주입하여 2.5 mTorr로 진공도를 유지하면서 박막 코팅을 실시하였다. 기판-타겟의 거리는 12 cm로 고정 하였고 0.7, 1.5, 2.0 kW의 스퍼터링 파워와 외부 자기장의 변화에 따라 실험을 실시하였다. 순수한 Al 박막의 경우 외부 자기장 변화가 박막조직 변화에 영향을 주었으나 Si이 함유된 Al 합금 박막에서는 외부 자기장의 효과보다는 스퍼터링 전원의 세기가 박막 조직을 변화시키는 주된 공정변수였다. 박막의 반사율은 Si이 함유된 박막이 순수한 Al 박막보다 높았으며 스퍼터링 전원 세기가 증가할수록 반사율이 증가하는 경향성을 보였다. 이것은 Si을 Al에 첨가하여 스퍼터링 전원 세기를 최적화하는 것만으로도 치밀한 조직의 박막을 코팅할 수 있으며 높은 반사율을 갖는 박막을 코팅할 수 있음을 의미한다.

  • PDF

Effects of the addition of low-dose ketamine to propofol anesthesia in the dental procedure for intellectually disabled patients

  • Hirayama, Akira;Fukuda, Ken-ichi;Koukita, Yoshihiko;Ichinohe, Tatsuya
    • Journal of Dental Anesthesia and Pain Medicine
    • /
    • 제19권3호
    • /
    • pp.151-158
    • /
    • 2019
  • Background: This study aimed to examine whether the combination of low-dose ketamine and propofol in deep sedation is clinically useful in controlling the behavior in intellectually disabled patients who are typically extremely noncooperative during dental procedures. Methods: A total of 107 extremely noncooperative intellectually disabled adult patients were analyzed. In all patients, deep sedation was performed using either propofol alone (group P) or using a combination of propofol and 0.2 mg/kg or 0.4 mg/kg ketamine (groups PK0.2 and PK0.4, respectively). The procedures were performed in the order of insertion of nasal cannula into the nostril, attachment of mouth gag, and mouth cleaning and scaling. The frequency of patient movement during the procedures, mean arterial pressure, heart rate, peripheral oxygen saturation, recovery time, discharge time, and postoperative nausea and vomiting were examined. Results: The three groups were significantly different only in the frequency of patient movement upon stimulation during single intravenous injection of propofol and scaling. Conclusion: For propofol deep sedation, in contrast to intravenous injection of propofol alone, prior intravenous injection of low-dose ketamine (0.4 mg/kg) is clinically useful because it neither affects recovery, nor causes side effects and can suppress patient movement and vascular pain during procedures.

실규모 flat sheet MBR 운영 효율과 Fouling 특성을 위한 미생물 군집 평가 (Performance and microbial community analysis for fouling characteristics in a full-scale flat sheet membrane bioreactor)

  • 김승원;최정동
    • 상하수도학회지
    • /
    • 제37권6호
    • /
    • pp.325-334
    • /
    • 2023
  • Membrane bioreactor (MBR) provides the benefits on high effluent quality and construction cost without the secondary clarification. Despite of these advantages, fouling, which clogs the pore in membrane modules, affects the membrane life span and effluent quality. Studies on the laboratory scale MBR were focused on the control of particulate fouling, organic fouling and inorganic fouling. However, less studies were focused on the control of biofouling and microbial aspect of membrane. In the full scale operation, most MBR produces high effluent quality to meet the national permit of discharge regulation. In this study, the performance and microbial community analysis were investigated in two MBRs. As the results, the performance of organic removal, nitrogen removal, and phosphorus removal was similar both MBRs. Microbial community analysis, however, showed that Azonexus sp. and Propionivibrio sp. contributed to indirect fouling to cause the chemical cleaning in the DX MBR.

글로우방전 질량분석법을 이용한 구리 박막내의 미량불순물 분석: 음의 기판 바이어스에 의한 불순물원소의 농도변화 (Trace impurity analysis of Cu films using GDMS: concentration change of impurities by applying negative substrate bias voltage)

  • 임재원
    • 한국진공학회지
    • /
    • 제14권1호
    • /
    • pp.17-23
    • /
    • 2005
  • 본 논문은 글로우방전 질량분석법(Glow Discharge Mass Spectrometry: GDMS)을 이용하여 구리 박막내의 미량 불순물의 농도분석과 음의 기판 바이어스에 대한 구리 박막내의 불순물의 농도변화에 대해서 고찰하였다. 구리 박막은 실리콘 기판 위에 비질량 분리형 이온빔 증착장비를 이용하여 기판 바이어스를 걸지 않은 경우와 -50 V의 기판 바이어스를 걸은 상태에서 증착하였다. 전기를 통하지 않는 분석 샘플의 경우, 직류(DC) GDMS에 의한 분석시, 샘플 표면에서의 charge-up 효과에 의해 분석에 어려움이 있었지만, 본 실험에서는 간편하게 분석이 가능하도록 샘플을 알루미늄 포일(foil)로 감싸서 구리 박막으로부터 실리콘 기판 뒤의 샘플 홀더까지 전기적 접촉이 이루어지도록 하였다. 구리 타겟과 증착된 구리 박막들에 대한 GDMS 분석결과에 의해서, 전체적으로 박막내의 불순물의 양이 음의 기판 바이어스에 의해 줄어듦으로써 구리 박막의 전체 순도를 높일 수 있다는 것을 알게 되었다. 음의 기판 바이어스에 의한 불순물들의 농도변화는 각각의 불순물의 이온화 포텐셜의 차이에 의한 것으로, 박막 증착시 플라즈마내의 Penning ionization effect와 본 논문에서 제시한 이온화 과정에 의해 각 불순물의 농도변화가 설명되어질 수 있었다. 또한, 기판 위에서의 구리 이온들의 충격에 의한 cleaning effect도 박막내의 불순물의 농도변화에 기여했다고 판단된다.

청정환경용 정전기 제거장치 개발 (The development of the Ionizer using clean room)

  • 정종혁;우동식
    • 한국산학기술학회논문지
    • /
    • 제19권1호
    • /
    • pp.603-608
    • /
    • 2018
  • 전압 인가식 제전방식이 반도체나 디스플레이 산업에는 가장 많이 사용되고 있지만, 방전에 의한 주변 미세 먼지의 흡착 및 전극핀의 오염으로 불량 발생의 원인을 제공하므로, 주기적인 관리 비용이 발생하게 된다. 전극핀의 오염 문제는 코로나 방전으로 인하여, 주변 공기의 미세한 입자를 축적함으로 생성된다. Fuzz ball의 생성은 전극핀의 마모를 촉진 시키고, 또한 정전기 제거 장치의 성능을 저하시킨다. 오염물 제거 방법은 수동 브러쉬 및 자동 브러쉬를 이용하여 기계적인 세척 방법이 효과적이지만, 추가적인 기계부품이나 사용자의 관리를 요구한다. 일부의 경우에는 이미터에 축척된 오염물이 웨이퍼나 제품에 전이될 수도 있다. 이러한 문제를 해결하기 위해, 제전기의 외부로 돌출되는 전극핀을 없애고, 이온탱크 내부에 위치한 텡스텐 전극선을 이용하여 주위 기체 분자를 직접 이온화할 수 있는 청정 환경에 적합한 정전기 제거 장치를 개발하였다. 한국기계연구원에서 시험인증한 결과, 오염 입자는 평균 $0.7572particles/ft^3$이고, 제전 시간은 2초 이하 이며, 잔류 전위는 7.6V로 만족할 만한 결과를 얻었다.

에어로졸 중화기의 나노 입자 하전 특성 (Nano Particle Charging Characteristics of Aerosol Charge Neutralizers)

  • 지준호;배귀남;황정호
    • 대한기계학회논문집B
    • /
    • 제27권10호
    • /
    • pp.1489-1497
    • /
    • 2003
  • Aerosol charge neutralizers with various radioactive sources have been used to apply an equilibrium charge distribution to aerosols of unknown charge distribution. However, the performance of aerosol charge neutralizers is not well known, especially for highly charged particles. Measurements of highly charged particles are needed in air cleaning devices, e.g. electrostatic precipitator, bag filter with a pre-charger, and electrical cyclone. In this study, the particle charging characteristics of two different aerosol charge neutralizers were experimentally investigated for singly charged monodisperse particles and highly charged polydisperse particles. One has radioactive source of $^{85}$ Kr (beta source, 2 mCi) and the other has $^{210}$ Po (alpha source, 0,5 mCi). The air flow rate passing through each aerosol charge neutralizer was changed from 0.2 to 2.5 L/min. The results show that the charge distribution of singly charged monodisperse particles passing through the $^{85}$ Kr aerosol charge neutralizer is well agreed with the Boltzmann equilibrium charge distribution at an air flow rate of 0.3 L/min, However, it deviates from the equilibrium charge distribution when the air flow rates are 0.6, 1,0, and 1,5 L/min, On the other hands, the effect of air flow rate is insignificant for the $^{210}$ Po aerosol charge neutralizer. The non-equilibrium character in charge distribution of highly charged polydisperse particles passing through the $^{85}$ Kr aerosol charge neutralizer greatly depends on the air flow rate, however it is insensitive to the air flow rate for the $^{210}$ Po aerosol charge neutralizer.

PO 필름이 성주참외 품질 및 산업에 미치는 영향 (Effect of Polyolefin Film on Korean Melon Quality and Industry)

  • 신용습;이지은;도한우;전희;정두석
    • 생물환경조절학회지
    • /
    • 제25권2호
    • /
    • pp.95-99
    • /
    • 2016
  • PO 필름 공급이 경북 성주지역 참외 산업에 미치는 영향을 분석하기 위하여 참외 재배면적, 재배 농가수, 수량 및 소득 등을 분석한 결과, PE 필름은 2010년에 비해 2014년도에는 전국, 경북 성주 지역에서 각각 91.5%, 94.9%, 95.2%로 감소한 반면, PO 필름 보급은 각각 342.5%, 500%, 825% 이었다. 2010년에 비해 2015년 재배면적과 농가수는 각각 8.8%, 11.9% 감소하였다. 수량과 생산량은 각각 38.2%, 25.9% 증가하였다. 조수입은 2010년 3,051 억원에서 2015년 4,020 억원으로 1.3배 증가하였고 소득도 2010년 1,936 억원에서 2015년 4,020 억원으로 2.7배 증가하였다. 이상의 결과를 종합 하면 PO 필름으로 교체되면서, 참외 생산성은 증대되고, 작업 노력 및 유해물질 배출은 감소될 것으로 보여진다.

유체 모델을 이용한 질소 플라즈마의 특성 분석 (The Analysis of Nitrogen Plasma Using One-dimensional Self-consistent RF Fluid-Model)

  • 임장섭;소순열
    • 조명전기설비학회논문지
    • /
    • 제18권1호
    • /
    • pp.28-35
    • /
    • 2004
  • 질소는 안정한 가스로서 잘 알려져 있지만, 해리, 여기, 선리 등의 반응이 일어나기 시작하면 활성도가 높아지게 되고 오랫동안 유지되는 특성을 갖고 있다. 이러한 반응 및 전송과정을 이용하는 예가 많은 분야에서 볼 수 있다. 현재 질소 가스만의 특성 분석 연구에 관한 보고는 상당히 부ㅈㄱ하며 이러한 부분에 대한 연구가 필요하다고 볼 수 있다. 본 연구에서는 질소 플라즈마의 특성을 상세하게 이해하기 위해, 용량 결합형 프라즈마의 1차원 유체 모델에 의한 시뮬레이션을 행하였다. 하전입자의 밀도, 공가 전계 및 전자 에너지 등의 기본적인 움직임을 혹인하고, 전기적으로 정의 가스에서는 발생? 않는 전기적 이중층의 형성을 분석하였다. 또한 전원 전압을 300∼700 [V] 로, 압력을 0.2∼2.0 [Tow] 로 변화시켜, 그에 따른 플라즈마를 구성하는 각 입자들의 특성을 고찰하였다.

핵융합 수소동위원소의 회수공정과 위험관리에 관한 연구 (Study on the Recovery Process and Risk Management for Fusion Hydrogen Isotopes)

  • 정우찬;문흥만;장민호;이현곤;황명환;우인성
    • 한국가스학회지
    • /
    • 제23권6호
    • /
    • pp.81-89
    • /
    • 2019
  • 본 연구는 핵융합 배기가스에서 수소동위원소를 회수하기 위한 공정에 관한 것이다. 이 공정은 불순물을 제거하고 수소동위원소만을 최대로 회수하는 것이 목표이다. 수소와 중수소를 이용한 실험을 통해 수소동위원소의 회수가능성을 확인하고자 하였다. 수소가 포함된 배기가스는 주로 분리막 공정에서 불순물을 제거하여 순수한 수소만을 회수하고, 헬륨-글로우 방전 세척 공정의 배기가스는 초저온 흡착 공정을 이용해서 수소를 회수하였다. 또한 정성적 위험성 평가를 위해 HAZOP 분석을 실시하였다. 시나리오 분석을 위해서 피해 예측 ALOHA 프로그램을 사용하여 영향 범위를 산출하고, 안전성 방안을 모색하였다.

음압격리병실에서의 기침 토출입자의 입경에 따른 확산 및 침적에 대한 수치해석 연구 (A Numerical Study on Coughed Particle Dispersion and Deposition in Negative Pressure Isolation Room according to Particle Size)

  • 정민지;홍진관
    • 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
    • /
    • 제24권2호
    • /
    • pp.37-44
    • /
    • 2018
  • Purpose: This study investigates the influences of coughing direction and healthcare worker's location on the transport characteristics of coughed particles in airborne infection isolation room (AIIR), which is commonly called negative pressure isolation room, with a downward ventilation system. Methods: Computational Fluid Dynamics (CFD) was used to simulate the airflow and for tracing the behavior of particles. Results: The results show that the airflow pattern and coughing direction have a significant influence on the characteristics of particle dispersion and deposition. When healthcare workers are in the isolation room with the patient who is lying on the bed, it is recommended to be located far from the anteroom to reduce the exposures from infectious particles. And when the patient is lying, it is more effective in removing particles than when the patient is in Fowler's position. Although it is an isolation room that produces unidirectional flow, coughing particles can spread to the whole room and a large number of particles can be deposited onto patient, bed, side rails, healthcare worker, ceiling, floor, and sidewall. Implications: Following the patients' discharge or transfer, terminal cleaning of the vacated room, furniture, and all clinical equipment is essential. Also, it is necessary to establish detailed standard operating procedure (SOP) in order to reduce the risk of cross-contamination.