• Proceedings of the Korean Geotechical Society Conference
• /
• 2001.03a
• /
• pp.563-570
• /
• 2001

In this study, the charactersistics of horizontal drains used to stabilize the dredged fill are investigated experimentally by doing tensile strength test, discharge capacity test, and filter clogging test. The types of the drains selected for the study are filament type (Tyre-E), embossed type(Type-P) and heat bonded cubic type with the thickness 10mm(Type-010) and 5mm(Type-05). The results of tensile strength and discharge capacity test show that the performance of drain Type-O10 was better than the other drains. This is caused by the fact that the lattice shape core of drain Type-O10 has strong rigidity and minimizes the loss of the sectional area of discharge with increased confining pressure. Analyzing the compatibility of filters by the results of the strength characteristics test and clogging test, the filter of filament type drain produced with polyester clothed polyamide performed well.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2006.04a
• /
• pp.68-71
• /
• 2006

Seasonal fluctuation of groundwater level by pumping amount and stream discharge at the riverbank filtrate site adjacent to the Nakdong River in Daesan-Myeon was characterized. Groundwater level fluctuation shows increase in wet season (June, July, August and September) and decrease in dry season (the other months). Seasonal variation of pumping amount shows similar trend to the groundwater fluctuation due to higher consumption of potable water in summer. The relation of specific capacity, Nakdong River and pumping quantity was analyzed. The logarithmic relationship between specific capacity and the stream discharge gives high correlation coefficient, 0.96. This fact indicates that the increase of stream discharge rate reduces the rate of drawdown in the pumping area in wet season.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.8 no.2
• /
• pp.84-89
• /
• 2009

This paper has purpose of designing the earthing system installed on the ground without laying under the ground. As a solution for green IT environment to solve the existing earthing system, the third generation earthing machine was designed by using discharge electrodes, catalyzer, and hot wires. As a result of comparison, it found that the third generation earthing system suggested in this research had more increased discharge currents by 31[A] and the speed 25 times faster than the second generation earthing system. The suggested earthing system is allowed to be installed on the ground and solve construction costs, time, area, and environment pollution, which are problems in the existing earthing system. In addition, as the earthing technique has recently developed, the earthing system is classified by generation based on capacity.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.4
• /
• pp.641-647
• /
• 2008

In this paper, we have studied the basic discharge characteristics of ac-type cylindrical microcavity structure. The structure has a two electrodes, which are positioned in the bottom of the cavity and in the side wall of the cylinder, respectively. The discharge showed asymmetric phenomena depending on the position of a cathode electrode. When the bottom electrode was a cathode, the discharge was stronger even though the area of the cathode was smaller than that of the anode. Simulation results revealed that the focused electric field toward the bottom electrode increased ion density in the space which in turn strengthened the cathode sheath and ionization process.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.7
• /
• pp.44-51
• /
• 1998

Two-step neural network is designed for determining electrical discharge machining parameters in low erosion. The first neural network, which is used as a classification network, checks whether the current conditions are appropriate to electrical discharge machining in low tool erosion. If the conditions are appropriate to EDM in low erosion, suitable EDM parameters are generated by the second neural network. Theoretically known EDM conditions are produced and also utilized for training the second neural network. The trained neural network is tested how well suitable EDM machining conditions are generated under unknown machining situations Experimental result shows that the proposed two-step neural network approach could be effectively used for determining EDM parameters in low tool erosion. The results also have a practical contribution to EDM area in that it could be applied for maintaining low tool wear as well as obtaining maximum machining rates simultaneously.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.33 no.4
• /
• pp.148-159
• /
• 2021

This study estimates the region of freshwater influence (ROFI) by Han River discharge in the Yeomha channel, Gyeonggi Bay. A 3-D numerical model, which is validated for reproducibility of variation in current velocity and salinity, is applied in Gyeonggi Bay. Distance of freshwater influence (DOFI) is defined as the distance from the entrance of Yeomha channel to the point where surface salinity is 28 psu. Model scenarios were constructed by dividing the Han River discharge into 10 categories (200~10,000 m³/s). The relation equation between freshwater discharge and DOFI was calculated based on performing a non-linear regression analysis. ROFI in Yeomha channel expands from the southern sea area of Ganghwa-do to the northern sea area of Yeongheung-do as the intensity of Han River discharge increases. The discharge and DOFI are a proportional relationship, and the increase rate of DOFI gradually decreases as discharge increases. Based on the relation equation calculated in this study, DOFI in the Yeomha channel can be estimated through the monthly mean Han River discharge. Accordingly, it will be possible to respond and predict problems related to damage to water quality and ecology due to rapid freshwater runoff.

• Journal of Korea Entertainment Industry Association
• /
• v.15 no.8
• /
• pp.389-401
• /
• 2021

This study was performed to generate basic data to establish a health promotion plan for residents of Chungcheongbuk-do by identifying characteristics of discharged patients residing in the Chungcheongbuk-do area from an In-Depth Post-Discharge Injury Survey reported by the Korea Centers for Disease Control and Prevention(KCDCP). The Report provided data on demographic characteristics, medical institution use characteristics, medical use characteristics, and disease characteristics of patients discharged from medical institutions with 100 or more beds from 2013 to 2017. The total number of Chungcheongbuk-do residents who were admitted and discharged from 2013 to 2017 was estimated to be 1,656,590, and the discharge rate was 21,089, which was higher than the national average of 13,882 in 2016. The regions where the discharge rate increased during this period include Goesan, Yeongdong, Boeun, Okcheon, Jeungpyeong, and Eumseong-gun, which are mainly rural areas. Among the patients hospitalized and discharged from hospitals outside the Chungcheongbuk-do area, the discharge rate of patients who used hospitals in Incheon/Gyeonggi areas and Daejeon/Chungnam areas increased slightly. Among the malignant tumor patients, the number of lung cancer(included trachea & bronchial cancer) patients was the highest. In addition, the discharge rate was highest for patients with respiratory diseases. This study suggests that efforts need to be made to lower the discharge rate for infection, circulatory disease, genitourinary disease, and musculoskeletal disorder patients

• Journal of the Korean Geographical Society
• /
• v.39 no.4
• /
• pp.544-561
• /
• 2004

Weekly monitoring of discharge and water quality in forested and agricultural subcatchments were performed to understand the difference of water quality caused by land uses in Doegwollyong area. Correlations between water quality variables including discharge were analyzed for the same purpose. There was little variation of water Quality in forested subcatchment. On the other hand, the range of water quality variation in agricultural subcatchment was wide due to soil loss and the application of chemical fertilizers and livestock manure. Dissolved oxygen(DO) had strong negative correlation with discharge in both subcatchments. Total nitrogen(T-N) and potassium ion(K$^{+}$) had stronger positive correlation with discharge in forested subacatchment than in agricultural one. On the other hand, total suspended sediments(TSS), total phosphorus(T-P), and chemical oxygen demand(COD) had stronger correlation with discharge in agricultural subcatchment than in forested one. As water pollution of the Doam Lake, especially the increase of T-P is serious, soil conservation is very important to improve water quality. In particular, the loss of soil and nutrients from late June till early July were more serious than any other seasons, therefore it is necessary to apply environmentally sustainable methods of cultivation.n.

• Journal of Korea Water Resources Association
• /
• v.33 no.5
• /
• pp.527-536
• /
• 2000

This study estimates the pollution load in a basin by regional groups analyzing the relationship between the discharge and pollution load. The study area is placed in the Miho stream basin known as the main tributary of the Kum river. Four major Telemetary streamflow stations are chosen. In this research, discharge and water quality in a dry season and a flood season from the observed discharge in the stream are analyzed. The Rating-Curve and the Pollutograph are drawn analyzing discharge and water quality at the major stations. The characteristics of runoff for each stream are analyzed and the change of water quality are analyzed for rainfall period. The relationship between discharge and water quality has been investigated. The relationship between the discharge and pollution load is analyzed and a representative equation is derived. These relationships permit an estimates of the pollution load at the Miho stream basin. basin.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.10a
• /
• pp.1136-1143
• /
• 2008

The Vertical Drains(Sand Drains, Pack Drain, PBD) is used for Vertical Drains Method in domestic. Each of the drains is selected after it consider a field condition and efficiency of drain. A discharge capacity is very important factor, which to estimate a efficiency. And the smear Zone where disturbance area of in-suit by installation of Vertical Drains is important factor to select a drains. In this study, the complex discharge capacity test was operated for discharge capacity comparison of the Wing Drain and PBD. And a model test was operated to apprehend smear zone of the Wing Drain and PBD. From these tests, it was apprehended an engineering characteristic of vertical drain. The results of the complex discharge capacity test, a discharge capacity fell below $20cm^3/sec$ to $1cm^3/sec$ in more than overburden load $2.5kg/cm^2$. The Wing Drain maintained a over $40cm^3/sec$ in more than overburden load $2.5kg/cm^2$ and minimum discharge capacity $8cm^3/sec$. The results of the smear zone test, a influence bounds of smear zone was more larger in case of the Wing Drain(rectangle) than the PBD. But when a discharge capacity of Wing Drain is considered, it was concluded which smear zone bounds difference was effected in comparison with PBD. I think that it minimized a mandrel section to minimize a smear zone effect range