• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2000년도 추계학술대회 논문집
• /
• pp.219-225
• /
• 2000

This study is to develop a Fe-based disc brake lining with sponge structure for rolling stock of 150km/h train and to concept design with 3 groove type for brake disc reducing hot hair-crack and certainly friction coefficient. The developing brake lining would be to presumption of saving 300 million won during one year

• Tribology and Lubricants
• /
• 제27권2호
• /
• pp.95-100
• /
• 2011

The brake disc materials for railway vehicle have been mainly used cast-iron. The brake disc and pad should be light, resist to a thermal crack and absorb enough friction energy. In order to satisfy this requirement, aluminum alloy brake disc for railway vehicle has been newly developed. The aluminum itself has not been considered the friction material for railway vehicle. However, in the case of aluminum composite with dispersed ceramic particles, friction characteristics, resistance to wear and heat are much improved. In the present study, aluminum composite brake disc of 20% ceramic particle and three kinds of organic pads have been tested in dynamometer. The results show that Al MMC brake disc and pad have good friction coefficient and wear rate, and thermal cracks in brake disc have not been initiated. Also, the Al MMC brake disc can be applied to railway vehicle of 150 km/h.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 추계학술대회 논문집
• /
• pp.170-175
• /
• 2005

In this study, experimental and theoretical methods were applied to understand brake squeal noise VVVF rolling stock on tracks. Trailer cars needed to payed a particular attention, because they were the major source of brake noise. VVVF rolling stocks for lines no 1 of the subway system in Seoul were used for experimental analyses. In order to study brake squeal noise, a dynamometer test at the S&T Brake, Co., which was a manufacturer of brake pads had performed. For measuring vibration and noise, vibration tests of brake parts (brake lining, brake lining head, back plates, etc.) at the SNUT were executed. Also, vibration tests of disc assembly and lining block at the heavy maintenance shop of the Gunja depot were performed. The modal analyses by using an ANSYS which was one of the CAE commercial program were simulated to know the relationship to the mechanism of brake noise. On the based of the tests and the simulations it was found that specific frequencies of the brake parts affected squeal noise, and improvements for reducing squeal noise were proposed.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2000년도 제32회 추계학술대회 정기총회
• /
• pp.258-265
• /
• 2000

This study is to develop a Fe-based disc brake tinning with sponge structure for passenger car of 150km/h train and to concept design with 3 groove type for brake disc reducing hot hair-crack and certainly friction coeifficient. The developping brake linning would be to presumption of thermal stress Max.5.53k9/m0 of the 3 groove type. and It is stable friction coeifficient and wear rate on the Full Scale Brake dynamometer. So 3 groove type must be reduced to hot stress between Brake disc and Linning and Friction temperature is reduced about 20$^{\circ}C$

• Journal of Advanced Marine Engineering and Technology
• /
• 제22권1호
• /
• pp.67-76
• /
• 1998

Friction materials for brake linings and clutches have severe performance requirements. The principal function of such frictional elements is to convert kinetic energy to heat, and then either to absorb or to dissipate heat. In order to achieve these objectives, the coefficient of friction must be as high as possible, independent of variations in operating conditions, and the necessary energy conversion must be accomplished with a minimum of wear on the contacting parts. In this study, Al powder, Al bronze powder and Mo powder used in general for automobile brake was sprayed on automobile brake disc to restrain rust and to maintain friction performance. Dynamo and corrosion tests have been carried out. It is concluded that the sprayed disc with Al bronze powder has the most improved frictional performance and anti-corrosive characteristics. The main results obtained can be summarized as follows; 1. From the corrosion current density test for gray cast iron and sprayed disc with powders of Al, Al bronze and Mo, it was cleared that the spray treatment with Al bronze powder showed the most superior anti-corrosive characteristics than other powders. 2. By anode polarization toward the noble direction from corrosion potential, corrosion current density with sprayed brake disc by Al-bronze powder was the lowest. 3. Mean frictional coefficients obtained from dynamo test are as follows : the sprayed disc with Al(99.99%) powder was 0.190 ; the sprayed disc with Al-bronze powder was 0.312 ; the sprayed disc with Mo powder was 0.257 ; the non-sprayed disc of gray cast iron was 0.331. In the case of the sprayed disc Al-bronze powder showed the most excellent frictional characteristics . 4. Amount of burnish quantity obtained from burnish test by dynamometer is as follows : the sprayed disc with Al-powder was 1.079 mm : the sprayed disc with Al-bronze powder was 0.155 mm : the sprayed disc with Mo powder was 0.253 mm : the non-sprayed disc of gray cast iron was 0.241 mm. Al-bronze powder also showed the most excellent burnish characteristics.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.43-48
• /
• 2005

In order to facilitate technical exchange among nations and/or institutes through the establishment of mutual recognition and the reliability guarantee of testing results by testing standards standardization, the interlaboratory comparison tests on brake discs and linings between KRRI and CARS were conducted. So far, two ways of comparison tests were performed for a better understanding of mutual recognition and standardization in railroad brake linings between Korea and China. In this paper, the first and second comparison testing results have been summarized, and the suggestions for the future research work are also presented to encourage extensive research on comparison study of railroad brake discs and linings between KRRI and CARS. Eventually, the final goal of the current research will be the establishment of standardization of railroad testing standards.

• 한국융합학회논문지
• /
• 제11권5호
• /
• pp.139-144
• /
• 2020

본 연구에서는 드럼자체와 브레이크에 대한 시뮬레이션 해석을 하였으며 열해석 결과와 구조 해석을 통한 내구성을 고찰하여 그 해석 결과를 얻었다. 브레이크 실린더로 인하여 힘을 받는 라이닝,라이닝의 확장으로 인하여 힘을 받는 드럼 내부, 축의 회전으로 인하여 힘을 받는 드럼에 대한 열응력 및 구조 해석을 통하여 어느 부분에 등가응력과 변형량이 큰지를 확인하였다. 본 연구 결과를 종합하여 브레이크 디스크설계에 응용한다면 열변형 방지 및 그 내구성을 증대시키는데 활용성이 클 것으로 사료된다. 본 연구 결과는 실제적으로 드럼 브레이크에서의 열응력에 견딜 수 있는 내구성 있는 설계에 유용하게 적용할 수 있다. 계절별 기차선로 이음새에서의 내구성 해석을 적용함으로서 본 연구 결과가 미적인 설계에 응용되는 융합 연구에 유리하다고 보여진다.

• Tribology and Lubricants
• /
• 제5권1호
• /
• pp.21-27
• /
• 1989

A paper facirig, used for clutch disc or brake lining of the vehicles, is consisted of a combination of cellulose fiber of pulp with assorted filler and friction imparting particles, impregnated with a thermo-setting resin. In this study, as a substitution for the paper-production method, the molding-production method was attempted to produce the paper facings, and their frictional characteristics were investigated. According to the experimental results, it was estimated that the paper facings added with silica (SiO$_2$) have superior frictional characteristics, which is mused by the porosity and Mobs' hardness of the silica (SiO$_2$).

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2012년도 추계학술대회 논문집
• /
• pp.546-552
• /
• 2012

This paper is a study on squeal noise simulation under the consideration of temperature and pressure dependent material properties of friction material. For this, data of pressure and temperature dependent material properties of lining is achieved by using lining data base and exponential curve fit. Complex eigenvalue analysis is performed for predicting squeal noise frequency and instability and chassis dynamo test is performed for achieving squeal noise frequency, sound pressure level, occurrence temperature & pressure. Initial multi models are composed for considering complex interface conditions such as pad ear-clip, piston-housing and guide pin-torque member. The simulation result of base models is compared with the test result. Squeal noise simulation under the consideration of temperature and pressure dependent material properties of friction material is performed and analyzed using multi models. And additional condition is disc material property variation. Entire simulation conditions are combined and analyzed. Finally, this paper proposes direction of the warm squeal noise model.

• 한국자동차공학회논문집
• /
• 제7권9호
• /
• pp.172-181
• /
• 1999

The brakes employed on commercial vehicles must be able to withstand three types of demanding services which are use-emergency stops from high speed, many repeated stops as in a delivery or bus route, and speed control in mountain descents. Two type of friction brakes are in use ; drum breaks and disc brakes. Drum brakes are of the internally expanding type in which two shoes fitted externally with friction material are forced outward against the inside of a rotating drum on the wheel unit. In this case, the Braking power is produced by the friction force between a drum and a lining, and is converted into heat. In this research an unsteady state heat transfer analysis for drum brake system of heavy truck has been performed by ABAQUS/standard code in the case of single-braking and the repeated braking condition. The temperature histories obtained by the finite Element analysis have been compared with the result calculated by the simplified formulation and the result obtained by the experiment of real vehicle conditions.