• 제목/요약/키워드: disc

검색결과 3,912건 처리시간 0.032초

암석재료 인장강도의 동적 증가계수 및 변형률 속도 의존성에 대한 실험적 연구 (An Experimental Study on the Dynamic Increase Factor and Strain Rate Dependency of the Tensile Strength of Rock Materials)

  • 오세욱;최병희;민경조;정용복;조상호
    • 화약ㆍ발파
    • /
    • 제39권1호
    • /
    • pp.10-21
    • /
    • 2021
  • 암석이나 콘크리트와 같은 취성재료는 재료에 동하중이 가해질 때에는 큰 변형률속도 의존성을 보인다. 이는 취성재료의 역학적 성질이 하중속도에 따라 크게 변화할 수 있음을 의미한다. 이런 성질 때문에 취성재료의 변형률속도 의존성은 발파공학이나 암석동역학 문제를 풀 때 반드시 고려해야 할 중요한 사항들 중의 하나이다. 하지만 불행하게도 국내의 경우, 암석이나 여타의 취성재료들의 동적물성을 특성화하는 연구들은 아직 미진한 상태에 있다. 본 연구에서는 거창 화강암과 고강도 콘크리트 시편의 동적특성을 파악하기 위해 홉킨슨 압력봉을 이용하여 동적 인장시험을 실시하였다. 시험방법으로는 ISRM이 제안한 동적 압열시험과 박리시험을 채택하였다. 일반적으로, 고변형률속도 하에서는 후자의 방법이 더 우수한 것으로 알려져 있다. 이들 두 종류의 시험을 실시한 결과, 시편들의 동적 인장강도가 거의 비슷하게 나타났다. 하지만 저자들은 애초에 시험방법에 따라 측정강도가 상이할 것으로 예상했었다. 따라서 서로 다른 방법을 적용했음에도 측정 강도가 비슷하게 나타난 것은 오히려 시험과정에서 어떤 오류가 개입된 것으로도 볼 수 있으므로 후속연구를 통해 이 부분에 대해 상세조사를 수행할 예정이다.

물성 분석을 통한 Valine 의 여드름균 바이오필름 내부 세균막 형성 억제 연구 (A Study on Inhibition of Bacterial Membrane Formation in Biofilm formed by Acne Bacteria in Valine through Property Analysis)

  • 송상훈;황병우;손성길;강내규
    • 대한화장품학회지
    • /
    • 제47권2호
    • /
    • pp.163-170
    • /
    • 2021
  • 본 연구는 인체 친화적인 소재로 여드름균을 제거하는 기술을 만들기 위해서 진행하였다. 먼저 여드름균을 운모 디스크에 흡착시켜 생장시킨 후 원자현미경을 통해 바이오필름이 제대로 성장하였는지를 확인하였다. 이미지 상으로 형태가 둥글게 변하였고 사이즈도 평균 17% 정도 길어졌으며 물질을 구분하는 공명주파수의 위상 값이 단일값으로 관찰된 것을 볼 때 세균막이 운모디스크 전체를 덮어서 자란 바이오필름을 확인할 수 있었다. 이렇게 바이오필름을 생성시킨 여드름균에 여러 가지 아미노산 50 mM을 각각 처리하여 관찰한 결과 valine, serine, argine, leucine을 처리하였을 때 여드름균의 농도가 감소한 것을 발견하였다. 나노인덴터와 AFM 컨택모드로 스캔을 한 결과 valine (Val)을 처리한 여드름균 바이오필름의 강도가 증가해 있는 것을 확인하였다. 이것은 균을 보호하는 외곽의 세균막이 형성 억제됨으로써 세균막보다 더 높은 강도일 수 있는 균을 측정했기 때문일 수 있다. 여드름균과 Val을 처리한 여드름균에 균과 바이오필름 내부의 세균막을 볼 수 있는 형광물질을 각각 태깅하고 형광 이미지를 관찰한 결과 저농도 Val을 처리한 여드름균에서는 세균막이 관찰되었으나 10 mM 이상의 Val을 처리할 때부터 여드름균의 세균막이 형성 억제됨을 알 수 있었다. 뿐만 아니라 Val 10 mM 이상의 농도에서는 여드름균 전체의 농도도 감소하는 것을 알 수 있었다. 즉, 세균막이 형성 억제됨으로써 약화된 여드름균의 결합력에 의해서 여드름 균의 농도가 감소한 것으로 볼 수 있다. 마침내 Val의 투입은 세균막 생성을 억제함으로써 여드름균을 제거하는 효능이 있음을 확인하였다.

《典經》中的道術思想來源與轉化運用研究 (The Study of the Origin and Transformation of the Arts of the Dao in The Canonical Scripture)

  • 謝聰輝
    • 대순사상논총
    • /
    • 제36집
    • /
    • pp.267-298
    • /
    • 2020
  • 本文以〈《典經》中的道術思想來源與轉化運用研究〉為題, 主要採取溯源與比較的方法, 希望能較清楚梳理大巡真理會關於道術部分核心的思想淵源, 與其經實踐工夫轉變運用的巧妙智慧。除前言與結語兩節外, 第二節〈運度定數 : 《典經》天地公事與道教開劫度人比較〉中, 析論會造成否劫的原因, 除了歸諸於自古以來神明與人類的冤結怨深有關之外, 主要跟中國自古自然曆數週期的運行思想有關。而在調整度數的天地公事上, 姜聖上帝是主控且親力親為, 信徒只是配合的輔助角色 ; 道教則更強調經典的神聖經德功能, 以及需要負責的高真集體參與運作, 而不是至高神元始天尊一人所能獨為。第三節 〈道術儀式的來源與運用特質〉分析上, 除探究了五方將, 二十四將, 二十八將與四十八將的來源意涵外, 也論證了《典經》 中一部分道術經咒與道教神霄雷法的關係, 最後則提出了其中的遁甲步罡儀式與六壬式盤占卜操作有關的看法。

Mechanical behavior and microstructural characterization of different zirconia polycrystals in different thicknesses

  • Arcila, Laura Viviana Calvache;Ramos, Nathalia de Carvalho;Campos, Tiago Moreira Bastos;Dapieve, Kiara Serafini;Valandro, Luiz Felipe;de Melo, Renata Marques;Bottino, Marco Antonio
    • The Journal of Advanced Prosthodontics
    • /
    • 제13권6호
    • /
    • pp.385-395
    • /
    • 2021
  • PURPOSE. To characterize the microstructure of three yttria partially stabilized zirconia ceramics and to compare their hardness, indentation fracture resistance (IFR), biaxial flexural strength (BFS), and fatigue flexural strength. MATERIALS AND METHODS. Disc-shaped specimens were obtained from 3Y-TZP (Vita YZ HT), 4Y-PSZ (Vita YZ ST) and 5Y-PSZ (Vita YZ XT), following the ISO 6872/2015 guidelines for BFS testing (final dimensions of 12 mm in diameter, 0.7 and 1.2 ± 0.1 mm in thicknesses). Energy-dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD) and scanning electron microscopy (SEM) analyses were performed, and mechanical properties were assessed by Vickers hardness, IFR, quasi-static BFS and fatigue tests. RESULTS. All ceramics showed similar chemical compositions, but mainly differed in the amount of yttria, which was higher as the amount of cubic phase in the diffractogram (5Y-PSZ > 4Y-PSZ > 3Y-TZP). The 4Y- and 5Y-PSZ specimens showed surface defects under SEM, while 3Y-TZP exhibited greater grain uniformity on the surface. 5Y-PSZ and 3Y-TZP presented the highest hardness values, while 3Y-TZP was higher than 4Y- and 5Y-PSZ with regard to the IFR. The 5Y-PSZ specimen (0.7 and 1.2 mm) showed the worst mechanical performance (fatigue BFS and cycles until failure), while 3Y-TZP and 4Y-PSZ presented statistically similar values, higher than 5Y-PSZ for both thicknesses (0.7 and 1.2 mm). Moreover, 3Y-TZP showed the highest (1.2 mm group) and the lowest (0.7 mm group) degradation percentage, and 5Y-PSZ had higher strength degradation than 4Y-PSZ group. CONCLUSION. Despite the microstructural differences, 4Y-PSZ and 3Y-TZP had similar fatigue behavior regardless of thickness. 5Y-PSZ had the lowest mechanical performance.

전북지역 송아지 설사 유래 병원성 대장균의 병원성 인자 및 다제 내성 패턴 (Virulence factors and multi-drug resistant patterns of pathogenic Escherichia coli isolates from diarrheic calves in Jeonbuk)

  • 곽길한;김선민;유영주;유정희;임미나;장유정;허진
    • 한국동물위생학회지
    • /
    • 제44권4호
    • /
    • pp.271-281
    • /
    • 2021
  • Pathogenic Escherichia coli (E. coli) is one among the most important agents of diarrhea in calves. From January to December 2021, 108 isolates from feces of calves with diarrhea were investigated for enterotoxigenic E. coli (ETEC), enteropathogenic E. coli (EPEC), shiga toxin-producing E. coli (STEC), enteroaggregative E. coli (EAEC), and enteroinvasive E. coli (EIEC) using real-time PCR. In addition, the genes for F5, F17 and F41 fimbriae were detected by PCR. The most frequently isolated pathotypes were EPEC/STEC (29 isolates), and ETEC/EPEC/STEC (29 isolates). ETEC/EPEC, and ETEC/STEC were also found in 10 isolates. EPEC, STEC, and ETEC were detected in 13, 11, and 6 respectively. EAEC, and EIEC was not detected. Antimicrobial resistance test was carried out by agar disc diffusion method with 14 antimicrobials. Among 108 pathogenic E. coli isolates, 107 isolates were resistant to at least one of 14 antibiotics used in this study, 99 (91.7%) were resistant to two or more antimicrobials, and a single remarkable isolate was resistant to 14 antimicrobials. The isolates were primarily resistant to penicillins, streptomycin, tetracycline, ceftiofur, Trimethoprim/sulfamethoxazole, Kanamycin, and Ciprofloxacin. The high rate of resistance in pathogenic E. coli, sometimes to multiple drugs, may complicate future options for treating human infections. These results may bu used for diagnosis and therpeitic purposes in calves with diarrhea.

급식실 실내공기에서 분리된 황색포도상구균과 바실러스 세레우스의 독소 유전자 및 항생제 내성 (Toxin Gene and Antibiotic Resistance of Staphylococcus aureus and Bacillus cereus Isolated from Indoor Air in Cafeteria)

  • 오도경;조아현;김찬영;정은선;김중범
    • 한국식품위생안전성학회지
    • /
    • 제36권6호
    • /
    • pp.520-527
    • /
    • 2021
  • 본 연구에서는 보육시설 실내공기에서 분리된 식중독 균주의 독소 유전자 분포와 항생제 내성을 분석하여 보육시설 실내공기에 의한 식중독 발생을 사전 예방하고 식중독 발생 시 적절한 치료를 위한 기초자료를 제공하고자 하였다. 어린이집 실내공기에서 분리된 Staphylococcus aureus 16주, Bacillus cereus 37주를 실험대상으로 하였다. S. aureus와 B. cereus 독소 유전자는 PCR 방법으로 검출하였다. 항생제 감수성 실험은 Clinical and Laboratory Standard Institute의 디스크 확산법에 따라 실험하였다. S. aureus 16 균주 중 11 균주(68.6%)에서 seg와 sei 독소 유전자가 검출되었다. B. cereus 37 균주 모두에서 nheA와 nheB 독소 유전자가 검출되었다. B. cereus 독소 유전자 패턴은 총 12개로 나타났으며 nheA-nheB-nheC 독소 유전자가 가장 중요한 패턴으로 나타났다. S. aureus 16 균주의 항생제 감수성실험 결과 ampicillin과 penicillin 항생제에 93.8%, 87.5% 내성을 나타내었으나 methicillin resistance Staphylococcus aureus와 vacomycin resistance Staphylococcus aureus는 검출되지 않았다. B. cereus 37 균주의 항생제 감수성 실험 결과 ampicillin과 penicillin 항생제에 100% 내성을 나타냈었다. 이러한 결과를 종합하여 볼 때 보육시설 실내공기에 오염된 S. aureus와 B. cereus에 의한 식중독을 발생을 예방하기 위하여 주기적인 환기와 공기 질 관리가 필요한 것으로 판단되었다.

Full-Endoscopic versus Minimally Invasive Lumbar Interbody Fusion for Lumbar Degenerative Diseases : A Systematic Review and Meta-Analysis

  • Son, Seong;Yoo, Byung Rhae;Lee, Sang Gu;Kim, Woo Kyung;Jung, Jong Myung
    • Journal of Korean Neurosurgical Society
    • /
    • 제65권4호
    • /
    • pp.539-548
    • /
    • 2022
  • Objective : Although full-endoscopic lumbar interbody fusion (Endo-LIF) has been tried as the latest alternative technique to minimally invasive transforaminal lumbar interobody fusion (MIS-TLIF) since mid-2010, the evidence is still lacking. We compared the clinical outcome and safety of Endo-LIF to MIS-TLIF for lumbar degenerative disease. Methods : We systematically searched electronic databases, including PubMed, EMBASE, and Cochrane Library to find literature comparing Endo-LIF to MIS-TLIF. The results retrieved were last updated on December 11, 2020. The perioperative outcome included the operation time, blood loss, complication, and hospital stay. The clinical outcomes included Visual analog scale (VAS) of low back pain and leg pain and Oswestry disability index (ODI), and the radiological outcome included pseudoarthosis rate with 12-month minimum follow-up. Results : Four retrospective observational studies and one prospective observational study comprising 423 patients (183 Endo-LIF and 241 MIS-TLIF) were included, and the pooled data analysis revealed low heterogeneity between studies in our review. Baseline characteristics including age and sex were not different between the two groups. Operation time was significantly longer in Endo-LIF (mean difference [MD], 23.220 minutes; 95% confidence interval [CI], 10.669-35.771; p=0.001). However, Endo-LIF resulted in less perioperative blood loss (MD, -144.710 mL; 95% CI, 247.941-41.478; p=0.023). Although VAS back pain at final (MD, -0.120; p=0.586), leg pain within 2 weeks (MD, 0.005; p=0.293), VAS leg pain at final (MD, 0.099; p=0.099), ODI at final (MD, 0.141; p=0.093) were not different, VAS back pain within 2 weeks was more favorable in the Endo-LIF (MD, -1.538; 95% CI, -2.044 to -1.032; p<0.001). On the other hand, no statistically significant group difference in complication rate (relative risk [RR], 0.709; p=0.774), hospital stay (MD, -2.399; p=0.151), and pseudoarthrosis rate (RR, 1.284; p=0.736) were found. Conclusion : Relative to MIS-TLIF, immediate outcomes were favorable in Endo-LIF in terms of blood loss and immediate VAS back pain, although complication rate, mid-term clinical outcomes, and fusion rate were not different. However, the challenges for Endo-LIF include longer operation time which means a difficult learning curve and limited surgical indication which means patient selection bias. Larger-scale, well-designed study with long-term follow-up and randomized controlled trials are needed to confirm and update the results of this systematic review.

Color stability of 3D-printed denture resins: effect of aging, mechanical brushing and immersion in staining medium

  • Alfouzan, Afnan Fouzan;Alotiabi, Hadeel Minife;Labban, Nawaf;Al-Otaibi, Hanan Nejer;Taweel, Sara Mohammad Al;AlShehri, Huda Ahmed
    • The Journal of Advanced Prosthodontics
    • /
    • 제13권3호
    • /
    • pp.160-171
    • /
    • 2021
  • Purpose. This in-vitro study evaluated and compared the color stability of 3D-printed and conventional heat-polymerized acrylic resins following aging, mechanical brushing, and immersion in staining medium. Materials and methods. Forty disc-shaped specimens (10 mm in diameter and 3 mm thick) were prepared from two 3D-printed [DentaBASE (DB) and Denture 3D+ (D3D)] and one conventional polymethylmethacrylate (PMMA) denture materials. The specimens were thermo-cycled, subjected to mechanical brushing, and were immersed in either coffee, lemon juice, coke, or artificial saliva (AS) to simulate one and two years of oral use. Color measurements of the specimens were recorded by a spectrophotometer at baseline (T0), and after one (T1) and two years (T2) of simulation. The color changes (ΔE) were determined and also quantified according to the National Bureau of Standards (NBS) units. Descriptive statistics, followed by factorial ANOVA and Bonferroni post-hoc test (α=.05), were applied for data analysis. Results. The independent factors, namely material, staining medium, and immersion time, and interaction among these factors significantly influenced ΔE (P<.009). Irrespective of the materials, treatments, and time, the highest and the lowest mean ΔEs were observed for PMMA in lemon juice (4.58 ± 1.30) and DB in AS (0.41 ± 0.18), respectively. Regarding the material type, PMMA demonstrated the highest mean ΔE (2.31 ± 1.37), followed by D3D (1.67 ± 0.66), and DB (0.85 ± 0.52), and the difference in ΔE between the materials were statistically significant (P<.001). All the specimens demonstrated a decreased color changes at T2 compared to T1, and this difference in mean ΔE was statistically significant (P<.001). Conclusion. The color changes of 3D-printed denture resins were low compared to conventional heat polymerized PMMA. All the tested materials, irrespective of the staining medium used, demonstrated a significant decrease in ΔE values over time.

신효월도산(神效越桃散)이 메티실린에 내성이 있는 Staphylococcus aureus에 대한 항균활성에 관한 연구 (Antibacterial Effect of Sinhyowoldosan Against Methicillin-Resistant Staphylococcus aureus)

  • 신인식;강옥화;정대기;강희정;김지은;황형칠;김인원;권동렬
    • 대한본초학회지
    • /
    • 제28권1호
    • /
    • pp.59-64
    • /
    • 2013
  • Objectives : Methicillin-Resistant Staphylococcus aureus (MRSA) is a cephalosporin and beta-lactam antibiotic-resistant strains. In most cases, that is spread from infected patients and infection rates are growing increasingly. Thus, accordingly, increased resistance to antibiotics is causing serious problems in the world. Therefore, there is a need to develop alternative antimicrobial drugs for the treatment of infections diseases. Methods : The antibacterial activities of Sinhyowoldosan were evaluated against 3 strains of Methicillin-resistant staphylococcus aureus(MRSA) and 1 standard Methicillin-susceptible S. aureus (MSSA) strain by using the disc diffusion method, minimal inhibitory concentrations (MICs) assay, colorimetric assay using MTT test, checkerboard dilution test and time-kill assay was performed under dark. Results : The MIC (minimum inhibitory concentration) of Sinhyowoldosan water extract against S. aureus strains ranged from 500 to 2,000 ${\mu}g/mL$, so we have confirmed it on a strong antibacterial effect. Also, the combinations of Sinhyowoldosan water extract and conventional antibiotics exhibited improved inhibition of MRSA with synergy effect. We suggest that Sinhyowoldosan water extract against MRSA have antibacterial activity, it has potential as alternatives to antibiotic agent. the combination test was used, Triton X-100 (TX) and DCCD for measurement of membrane permeability and inhibitor of ATPase. As a result, antimicrobial activity of SH is affected by the cell membrane were assessed. Conclusion : We suggest that the Sinhyowoldosan water extract lead the treatment of bacterial infection to solve the resistance and remaining side-effect problems that are the major weak points of traditional antibiotics.

논리적 시간의 균열 라캉 정신분석의 시간은 거꾸로 흐른다 (The Uncertainty of Logical Time The Time of Lacan's Psychoanalysis Flows Backwards)

  • 이동석
    • 문화기술의 융합
    • /
    • 제7권4호
    • /
    • pp.113-122
    • /
    • 2021
  • 이 연구는 자크 라캉(Jacques Lacan : 1901 ~ 1981)이 1945년 3월에 『예술노트 Les Cahiers d'Art』의 복 간호에 실은 논문 『논리적 시간과 선취된 확실성의 단언 : 한 가지 새로운 소피즘』을 토대로 시작한다. 이 논문에서 교도관이 세명의 죄수들에게 난해한 문제를 제시한다. 문제를 풀면 그 죄수는 석방된다. 문제를 풀기 위해 조건이 주어진다. 죄수들 상호 간의 대화 금지와 자신 등 뒤에 붙은 원반을 볼 수 없다. 이 시간과 공간 속에서 죄수들은 선택 받는 자가 되기 위해 '이해하는 시간'을 통하여 논리적 시간으로 자신들을 위치시킨다. 우리는 언제나 논리적 시간 속에 살고 있다. 필자는 라캉이 정신분석에서 논리적 시간을 파괴하는 지점을 주장할 것이다. 라캉 정신분석의 시간은 과거, 현재, 미래의 시간 구분을 초월한다. 우리의 시간은 언제나 현재 속의 과거이다. 라캉 정신분석에서 논리적 시간은 타자의 속의 시간이다. 라캉 정신분석 시간개념의 초월성은 논리적 시간의 일탈을 보여준다. 필자는 본문에서 라캉이 정신분석과 시간의 문제를 타자 속의 시간과 어떻게 대비시키는가를 증명해 보려 한다. 첫째, 정신분석에서 논리적 시간과 충동은 어떻게 연관되는가를 살펴볼 것이다. 둘째로 시니피앙(기표, signifiant)의 사후성을 논할 것이다. 셋째로 라캉 정신분석 시간의 초월성을 제시할 것이다. 결론에서 라캉 정신분석의 시간은 거꾸로 흐르고 있다는 관점을 제시할 것이다. 라캉 정신분석에서 논리적인 시간은 타자의 영토에 있으며, 무한대의 시간이라는 것을 증명하려 한다.