• Explosives and Blasting
• /
• v.39 no.1
• /
• pp.10-21
• /
• 2021

Brittle materials such as rocks and concretes exhibit large strain-rate dependency under dynamic loading conditions. This means that the mechanical properties of such materials can significantly be varied according to load velocity. Thus, the strain-rate dependency is recognized as one of the most important considerations in solving problems of blast engineering or rock dynamics. Unfortunately, however, studies for characterizing the dynamic properties of domestic rocks and other brittle materials are still insufficient in the country. In this study, dynamic tensile tests were conducted using the Hopkinson pressure bar apparatus to characterize the dynamic properties of Geochang granite and high-strength concrete specimens. The dynamic Brazilian disc test, which is suggested by ISRM, and the spalling method were applied. In general, the latter is believed to have some advantages in experiments under high-strain rate deformation. It was found from the tests that there were no significant difference between the dynamic tensile strengths obtained from the two different test methods for the two materials given. However, this was not the expected result before the tests. Actually, authors expected that there be some differences between them. Hence, it is thought that further investigations are needed to clarify this results.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.47 no.2
• /
• pp.163-170
• /
• 2021

This study was conducted to create a technology to remove acne bacteria with human-friendly materials. First, the Cutibacterium acnes (C. acnes) were adsorbed to the mica disc to grow, and then the biofilm was checked through an atomic microscope to see if the biofilm had grown. Based on the topographic image, the shape changed round, the size was 17% longer on average, and the phase value of the resonance frequency separating materials was observed as a single value, the biofilm grown by covering the extracellular polymeric substrate (EPS). As a result of processing 50 mM of amino acids in the matured biofilm, the concentration of C. acnes decreased when valine, serine, arginine and leucine were treated. Scanning with nanoindentation and AFM contact modes confirmed that the hardness of biofilms treated with Valine (Val) increased. This indicates that an AFM tip measured cell which may have more solidity than that of EPS. The experiment of fluorescent tagged to EPS displays an existence of EPS at the condition of 10 mM Val, but an inhibition of growth of EPS at the 50 mM Val. Number of C. acnes was also reduced above 10 mM of Val. Weak adhesion of biofilm generated from an inhibition of EPS formation seems to induce decrease of C. acnes. Accordingly, we elucidated that Val has an efficiency which eliminates C. acnes by approach of an inhibition of EPS.

• Journal of the Daesoon Academy of Sciences
• /
• v.36
• /
• pp.267-298
• /
• 2020

The purpose of the paper is to analyze the developmental background and practical approaches to the arts of the Dao (道術 dosul) in Daesoon Jinrihoe (大巡真理會) by tracing this concept back to its source and comparing and contrasting Daesoon Jinrihoe's usage of 'arts of the Dao' with the usage found in traditional Daoism. The paper is divided into a preface, conclusion, and two body sections. Especially significant discoveries appear in the second and third sections. In the second section, the Daoist concept of Alterable and Unalterable Degree Numbers (運度定數 yundudingshu, 'degree numbers' suggesting 'fate' or 'destiny') allows for a comparison between the Reordering Works of Heaven and Earth (天地公事 cheonjigongsa) from Daesoon Jinrihoe's The Canonical Scripture (典經 jeon-gyeong) and the Opening of Calamities to Save Humanity (開劫度人 kaijieduren) in Daoism. Here discourse can be provided regarding the cause of calamities (劫 'jie' in Chinese and 'geop' in Sino-Korean). Additionally examined are the deep grievances between divine beings and humans and the cosmic cycles of growth and decay as both of these relate to the reason for calamities. As for the resolving of calamities, there are two differing perspectives proposed by Daesoon Jinrihoe and traditional Daoism. Daesoon Jinrihoe believes that Kang Jeungsan (姜甑山) led changes and renewal through the Reordering Works of Heaven and Earth. In this context, clergy and laity play roles as assistants. However, Daoism emphasizes gaining merit from the recitation of scriptures and the collective participation of immortals rather than relying completely upon divine intervention from the Celestial Worthy of the Primordial State (元始天尊 yuanshi tianzun). In the third section, 'The Origin and Application of the Arts of the Dao (道術 daoshu),' analysis is provided regarding the origin and connotation of five directional generals (五方將 wufangjiang), the twenty-four generals (二十四將 ershijiang), the twenty-eight generals (二十八將 ershibajiang), and the forty-eight generals (四十八將 sishibajiang). Likewise examined is the relationship between the arts of the Dao in The Canonical Scripture and Thunder Rites in the Shen Xiao Lineage (道教神霄雷法 daojiao shenxiao leifa) of Daoism. Lastly, some points are made about the operation of two ceremonies: The Ceremony of Transformation and Pacing (遁甲步罡儀式 dunjiabugangyishi) and Divination through the Formula Disc of the Six Ren Gods (六壬式盤占卜 liuren shipanzhanbu).

• The Journal of Advanced Prosthodontics
• /
• v.13 no.6
• /
• pp.385-395
• /
• 2021

PURPOSE. To characterize the microstructure of three yttria partially stabilized zirconia ceramics and to compare their hardness, indentation fracture resistance (IFR), biaxial flexural strength (BFS), and fatigue flexural strength. MATERIALS AND METHODS. Disc-shaped specimens were obtained from 3Y-TZP (Vita YZ HT), 4Y-PSZ (Vita YZ ST) and 5Y-PSZ (Vita YZ XT), following the ISO 6872/2015 guidelines for BFS testing (final dimensions of 12 mm in diameter, 0.7 and 1.2 ± 0.1 mm in thicknesses). Energy-dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD) and scanning electron microscopy (SEM) analyses were performed, and mechanical properties were assessed by Vickers hardness, IFR, quasi-static BFS and fatigue tests. RESULTS. All ceramics showed similar chemical compositions, but mainly differed in the amount of yttria, which was higher as the amount of cubic phase in the diffractogram (5Y-PSZ > 4Y-PSZ > 3Y-TZP). The 4Y- and 5Y-PSZ specimens showed surface defects under SEM, while 3Y-TZP exhibited greater grain uniformity on the surface. 5Y-PSZ and 3Y-TZP presented the highest hardness values, while 3Y-TZP was higher than 4Y- and 5Y-PSZ with regard to the IFR. The 5Y-PSZ specimen (0.7 and 1.2 mm) showed the worst mechanical performance (fatigue BFS and cycles until failure), while 3Y-TZP and 4Y-PSZ presented statistically similar values, higher than 5Y-PSZ for both thicknesses (0.7 and 1.2 mm). Moreover, 3Y-TZP showed the highest (1.2 mm group) and the lowest (0.7 mm group) degradation percentage, and 5Y-PSZ had higher strength degradation than 4Y-PSZ group. CONCLUSION. Despite the microstructural differences, 4Y-PSZ and 3Y-TZP had similar fatigue behavior regardless of thickness. 5Y-PSZ had the lowest mechanical performance.

• Korean Journal of Veterinary Service
• /
• v.44 no.4
• /
• pp.271-281
• /
• 2021

Pathogenic Escherichia coli (E. coli) is one among the most important agents of diarrhea in calves. From January to December 2021, 108 isolates from feces of calves with diarrhea were investigated for enterotoxigenic E. coli (ETEC), enteropathogenic E. coli (EPEC), shiga toxin-producing E. coli (STEC), enteroaggregative E. coli (EAEC), and enteroinvasive E. coli (EIEC) using real-time PCR. In addition, the genes for F5, F17 and F41 fimbriae were detected by PCR. The most frequently isolated pathotypes were EPEC/STEC (29 isolates), and ETEC/EPEC/STEC (29 isolates). ETEC/EPEC, and ETEC/STEC were also found in 10 isolates. EPEC, STEC, and ETEC were detected in 13, 11, and 6 respectively. EAEC, and EIEC was not detected. Antimicrobial resistance test was carried out by agar disc diffusion method with 14 antimicrobials. Among 108 pathogenic E. coli isolates, 107 isolates were resistant to at least one of 14 antibiotics used in this study, 99 (91.7%) were resistant to two or more antimicrobials, and a single remarkable isolate was resistant to 14 antimicrobials. The isolates were primarily resistant to penicillins, streptomycin, tetracycline, ceftiofur, Trimethoprim/sulfamethoxazole, Kanamycin, and Ciprofloxacin. The high rate of resistance in pathogenic E. coli, sometimes to multiple drugs, may complicate future options for treating human infections. These results may bu used for diagnosis and therpeitic purposes in calves with diarrhea.

• Journal of Food Hygiene and Safety
• /
• v.36 no.6
• /
• pp.520-527
• /
• 2021

In this study, toxin gene and antibiotic resistance of food poisoning strains isolated from indoor air in the cafeteria were analyzed to prevent food poisoning. Staphylococcus aureus (16 strains) and Bacillus cereus (37 strains) isolated from indoor air in child care center were tested. The toxin genes of S. aureus and B. cereus were detected by PCR assay. The antimicrobial susceptibility test followed the disc diffusion method described by the Clinical and Laboratory Standard Institute. The seg and sei toxin genes were detected in 11 of 16 S. aureus strains (68.6%). The nheA and nheB toxin genes were detected in 37 B. cereus strains. In this study, a total of 12 toxin gene patterns of B. cereus were found, among which the nheA-nheB-nheC toxin gene was found to be the most frequent pattern. The result of the antimicrobial susceptibility test of S. aureus revealed 93.8% and 87.5% resistance to ampicillin and penicillin antibiotics, but methicillin resistance S. aureus and vancomycin resistance S. aureus were not detected. All 37 B. cereus tested in this study were resistant to ampicillin and penicillin antibiotics. Based on the result of this study, it was judged that regular ventilation and air quality management were necessary to prevent food poisoning caused by S. aureus and B. cereus contaminated in the indoor air of child care centers.

• Journal of Korean Neurosurgical Society
• /
• v.65 no.4
• /
• pp.539-548
• /
• 2022

Objective : Although full-endoscopic lumbar interbody fusion (Endo-LIF) has been tried as the latest alternative technique to minimally invasive transforaminal lumbar interobody fusion (MIS-TLIF) since mid-2010, the evidence is still lacking. We compared the clinical outcome and safety of Endo-LIF to MIS-TLIF for lumbar degenerative disease. Methods : We systematically searched electronic databases, including PubMed, EMBASE, and Cochrane Library to find literature comparing Endo-LIF to MIS-TLIF. The results retrieved were last updated on December 11, 2020. The perioperative outcome included the operation time, blood loss, complication, and hospital stay. The clinical outcomes included Visual analog scale (VAS) of low back pain and leg pain and Oswestry disability index (ODI), and the radiological outcome included pseudoarthosis rate with 12-month minimum follow-up. Results : Four retrospective observational studies and one prospective observational study comprising 423 patients (183 Endo-LIF and 241 MIS-TLIF) were included, and the pooled data analysis revealed low heterogeneity between studies in our review. Baseline characteristics including age and sex were not different between the two groups. Operation time was significantly longer in Endo-LIF (mean difference [MD], 23.220 minutes; 95% confidence interval [CI], 10.669-35.771; p=0.001). However, Endo-LIF resulted in less perioperative blood loss (MD, -144.710 mL; 95% CI, 247.941-41.478; p=0.023). Although VAS back pain at final (MD, -0.120; p=0.586), leg pain within 2 weeks (MD, 0.005; p=0.293), VAS leg pain at final (MD, 0.099; p=0.099), ODI at final (MD, 0.141; p=0.093) were not different, VAS back pain within 2 weeks was more favorable in the Endo-LIF (MD, -1.538; 95% CI, -2.044 to -1.032; p<0.001). On the other hand, no statistically significant group difference in complication rate (relative risk [RR], 0.709; p=0.774), hospital stay (MD, -2.399; p=0.151), and pseudoarthrosis rate (RR, 1.284; p=0.736) were found. Conclusion : Relative to MIS-TLIF, immediate outcomes were favorable in Endo-LIF in terms of blood loss and immediate VAS back pain, although complication rate, mid-term clinical outcomes, and fusion rate were not different. However, the challenges for Endo-LIF include longer operation time which means a difficult learning curve and limited surgical indication which means patient selection bias. Larger-scale, well-designed study with long-term follow-up and randomized controlled trials are needed to confirm and update the results of this systematic review.

• The Journal of Advanced Prosthodontics
• /
• v.13 no.3
• /
• pp.160-171
• /
• 2021

Purpose. This in-vitro study evaluated and compared the color stability of 3D-printed and conventional heat-polymerized acrylic resins following aging, mechanical brushing, and immersion in staining medium. Materials and methods. Forty disc-shaped specimens (10 mm in diameter and 3 mm thick) were prepared from two 3D-printed [DentaBASE (DB) and Denture 3D+ (D3D)] and one conventional polymethylmethacrylate (PMMA) denture materials. The specimens were thermo-cycled, subjected to mechanical brushing, and were immersed in either coffee, lemon juice, coke, or artificial saliva (AS) to simulate one and two years of oral use. Color measurements of the specimens were recorded by a spectrophotometer at baseline (T0), and after one (T1) and two years (T2) of simulation. The color changes (ΔE) were determined and also quantified according to the National Bureau of Standards (NBS) units. Descriptive statistics, followed by factorial ANOVA and Bonferroni post-hoc test (α=.05), were applied for data analysis. Results. The independent factors, namely material, staining medium, and immersion time, and interaction among these factors significantly influenced ΔE (P<.009). Irrespective of the materials, treatments, and time, the highest and the lowest mean ΔEs were observed for PMMA in lemon juice (4.58 ± 1.30) and DB in AS (0.41 ± 0.18), respectively. Regarding the material type, PMMA demonstrated the highest mean ΔE (2.31 ± 1.37), followed by D3D (1.67 ± 0.66), and DB (0.85 ± 0.52), and the difference in ΔE between the materials were statistically significant (P<.001). All the specimens demonstrated a decreased color changes at T2 compared to T1, and this difference in mean ΔE was statistically significant (P<.001). Conclusion. The color changes of 3D-printed denture resins were low compared to conventional heat polymerized PMMA. All the tested materials, irrespective of the staining medium used, demonstrated a significant decrease in ΔE values over time.

• The Korea Journal of Herbology
• /
• v.28 no.1
• /
• pp.59-64
• /
• 2013

Objectives : Methicillin-Resistant Staphylococcus aureus (MRSA) is a cephalosporin and beta-lactam antibiotic-resistant strains. In most cases, that is spread from infected patients and infection rates are growing increasingly. Thus, accordingly, increased resistance to antibiotics is causing serious problems in the world. Therefore, there is a need to develop alternative antimicrobial drugs for the treatment of infections diseases. Methods : The antibacterial activities of Sinhyowoldosan were evaluated against 3 strains of Methicillin-resistant staphylococcus aureus(MRSA) and 1 standard Methicillin-susceptible S. aureus (MSSA) strain by using the disc diffusion method, minimal inhibitory concentrations (MICs) assay, colorimetric assay using MTT test, checkerboard dilution test and time-kill assay was performed under dark. Results : The MIC (minimum inhibitory concentration) of Sinhyowoldosan water extract against S. aureus strains ranged from 500 to 2,000 ${\mu}g/mL$, so we have confirmed it on a strong antibacterial effect. Also, the combinations of Sinhyowoldosan water extract and conventional antibiotics exhibited improved inhibition of MRSA with synergy effect. We suggest that Sinhyowoldosan water extract against MRSA have antibacterial activity, it has potential as alternatives to antibiotic agent. the combination test was used, Triton X-100 (TX) and DCCD for measurement of membrane permeability and inhibitor of ATPase. As a result, antimicrobial activity of SH is affected by the cell membrane were assessed. Conclusion : We suggest that the Sinhyowoldosan water extract lead the treatment of bacterial infection to solve the resistance and remaining side-effect problems that are the major weak points of traditional antibiotics.

• The Journal of the Convergence on Culture Technology
• /
• v.7 no.4
• /
• pp.113-122
• /
• 2021

This study begins on the basis of Jacques Lacan's article 『Logical Time and Assertions of Preemptive Certainty: A New Sophism』 published in the reissue of 『Art Note Les Cahiers d'Art』 in March 1945. In this paper, a guard presents an esoteric problem to three prisoners. If the problem is solved, the prisoner is released. A condition is given to solve a problem. Conversation between prisoners is prohibited, and the disc behind them cannot be seen. In this time and space, prisoners place themselves in logical time through the 'time of understanding' in order to become the chosen ones. We always live in logical time. We will argue the point at which Lacan destroys logical time in psychoanalysis. Time in Lacanian psychoanalysis transcends time divisions of the past, present, and future. Our time is always the past in the present. In Lacanian psychoanalysis, logical time is the time in the Other. The transcendence of the Lacanian psychoanalysis concept of time shows the deviation of logical time. In this text, We try to prove how Lacan contrasts psychoanalysis and the problem of time with time in the other. First, we will examine how logical time and impulse are related in psychoanalysis. Second, the postmortemity of the signifient (signifier) will be discussed. Third, Lacan psychoanalysis will present the transcendence of time. In conclusion, We will present the view that the time of Lacan psychoanalysis is flowing backwards. In Lacanian psychoanalysis, we try to prove that logical time is in the territory of the Other and is infinite time.