• 대한기계학회논문집
• /
• 제17권6호
• /
• pp.1633-1639
• /
• 1993

본 연구에서는 급속연소기술의 가솔린엔진에 적용을 목적으로 흡입과정시 강한 와류(swirl)를 생성하는 마스크부착 헤드(masked shroud head, MSH)형을 급속연 소형으로 제작하여 마스크부착 헤드형에서의 급속연소효과를 이온전류법에 의한 화염 속도를 측정하므로서 규명하려한다. 이온전류는 이온탐침계(ion probe)를 연소실 표면의 두 지점에 설치하여 검출하며, 이온전류 신호를 정성적인 방법으로 검증한 후 표준 헤드형과 마스크부착헤드형을 장착한 엔진에 대해서 화염전파 속도를 비교 측정 한다. 측정된 화염 전파속도는 정확한 연소특성 분석을 위해 각 사이클에서의 값을 표본으로 하는 통계적 방법으로 처리한다.

• Journal of Power Electronics
• /
• 제16권5호
• /
• pp.1689-1697
• /
• 2016

Continuous conduction mode (CCM) boost converters are commonly used in home appliances and various industries because of their simple topology and low input current ripples. However, these converters suffer from several disadvantages, such as hard switching of the active switch and reverse recovery problems of the output diode. These disadvantages increase voltage stresses across the switch and output diode and thus contribute to switching losses and electromagnetic interference. A new topology is presented in this work to improve the switching characteristics of CCM boost converters. Zero-current turn-on and zero-voltage turn-off are achieved for the active switches. The reverse-recovery current is reduced by soft turning-off the output diode. In addition, an input current sensorless control is applied to the proposed topology by pre-calculating the duty cycles of the active switches. Power factor correction is thus achieved with less effort than that required in the traditional method. Simulation and experimental results verify the soft-switching characteristics of the proposed topology and the effectiveness of the proposed input current sensorless control.

• 정보처리학회논문지C
• /
• 제14C권1호
• /
• pp.7-16
• /
• 2007

3G 이동통신, 무선랜은 각기 다른 장단점을 가지고 무선 통신 서비스를 제공하고 있다. 현재 이들 서비스의 단점들을 보완하도록 설계한 WiBro 서비스가 개발되었으며. 3중-모드로 작동하는 단말기를 이용하는 사용자가 세 개 망을 편리하게 사용할 수 있도록 하기 위한 3G-WLAN-WiBro 연동 시스템이 제안되었다. 각 망은 보안과 과금을 위하여 사용자와 네트워크간의 상호 인증 절차를 도입하고 있으나, 서로 다른 인증 프로토콜을 사용하고 있다. 본 논문에서는 3G-WLAN-WiBro 연동 네트워크상에서, 사용자가 동일 사업자의 이종 망으로 이동할 때 이전망에서 사용하던 인증 정보를 활용하면서 새로운 망으로 안전하게 로밍할 수 있도록 지원하기 위한 통합된 인증 및 키 관리 프로토콜을 제안하였다.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제13권3호
• /
• pp.178-185
• /
• 2013

As computer technology continues to develop, computer networks are now widely used. As a result, there are many new intrusion types appearing and information security is becoming increasingly important. Although there are many kinds of intrusion detection systems deployed to protect our modern networks, we are constantly hearing reports of hackers causing major disruptions. Since existing technologies all have some disadvantages, we utilize algorithms, such as the fuzzy C-means (FCM) and the support vector machine (SVM) algorithms to improve these technologies. Using these two algorithms alone has some disadvantages leading to a low classification accuracy rate. In the case of FCM, self-adaptability is weak, and the algorithm is sensitive to the initial value, vulnerable to the impact of noise and isolated points, and can easily converge to local extrema among other defects. These weaknesses may yield an unsatisfactory detection result with a low detection rate. We use a genetic algorithm (GA) to help resolve these problems. Our experimental results show that the combined GA and FCM algorithm's accuracy rate is approximately 30% higher than that of the standard FCM thereby demonstrating that our approach is substantially more effective.

• Archives of Plastic Surgery
• /
• 제35권2호
• /
• pp.223-228
• /
• 2008

Purpose: V.A.C. is a new concept which is closed dressing with negative pressure to promote wound healing. It has been widely used as the treatment of chronic and acute wounds such as pressure sores, burns, stasis ulcers, and other complicated wounds. However It has disadvantages such as high cost and the need of specific equipment. In this article, we described new method to overcome these disadvantages. Methods: We made newly innovated equipment with 50 cc syringe and spring to create negative pressure. From May 2006 to May 2007, we applied it to two patients with chronic wound. Results: The treatment period was 5 weeks for one case and 3 weeks for the other case. Both patients were healed completely without admission and wound healing was accelerated. During follow-ups, there were no complications. The mean cost for single dressing was 9,590 won. Conclusion: Modified portable negative therapy using newly innovated equipment could accelerate wound healing better than conventional dressing. It lowers the number of dressings, saves cost of treatment, and enables treatment as outpatient basis.

• 한국컴퓨터정보학회논문지
• /
• 제21권8호
• /
• pp.13-20
• /
• 2016

The purpose of this study is to investigate and suggest nonviolent, emotionally and helpful games for young people. In this paper, the digital animation, advantages, disadvantages, production process, etc. for overseas trends were defined. Also, creating games with the Visual Basic language in the animated feature of the disadvantages of existing algorithms shows case and screen time, so delayed distortion appears respectively. The proposed algorithm improves the speed and distortion through the screen. Simply two games of in-game animation and animation in complex game features were designed for the experiment and showed the superiority of the proposed algorithm by running. In this paper, the user interface of the game for children and proposed relevant algorithms were designed and resultant screens of the game showed. Most of contemporary games are violent to children. Therefore, in order to solve such problems, the game which is not violent but educative and child-friendly was designed and implemented in this paper. The future study on the game with a more in-depth is needed for animation techniques.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2005년도 춘계학술대회 논문집
• /
• pp.71-76
• /
• 2005

The defects evaluation of the interior and the surface would be considered as vital characteristics in predicting the total life span of the steel structure. More importantly, the understandings in the interior composite of welding zone and the notifications in the presence, the formation, and the positioning of the non-metallic inclusion are necessary as well, since there were signs of relatively high defect frequency presented in the welding zone. The ultrasonic testing is a highly recommended technique chosen from among other techniques because of variety of advantages in conducting the non-destructive testing for the welding zone. However, the ultrasonic testing had technical disadvantages referred as followings; the problems due to the couplant between the PZT and the specimen, the formations that were miniature and complex, the moving subject, and the high temperature surrounding the specimen. This research was conducted to resolve the technical disadvantages of the contact ultrasonic testing by studying the non-contact ultrasonic testing where the ultrasonic waves were transferred by the laser, and revealing the specimen defects at its interior part and its surface part. The ultimate goal of this research was to develop a non-destructive evaluation applying the laser manipulated ultrasonic method for the steel structure.

• 대한인간공학회지
• /
• 제7권2호
• /
• pp.31-44
• /
• 1988

If an error occurs in the automatic mode when the advanced teleoperator system performs a task in hostile environment then the automatic mode changes into the manual mode. The operation by the control program and the operation by a human recover the error in the manual mode. The system resumes the automatic mode and continues the given task. It is necessary to improve the manual mode in order to make the best use of a man-robot system, as a part of the human interface technique. Therefore, the error recovery task is performed by combining the operation by the control program representing autonomy of a robot and the operation by a human representing versatility of a human operator effectively in the view point of human factors engineering. The geometric inverse kinematics is used for the calculation of the robot joint values in the operation by the control program. The singularity operation error and the parameter operation error often occur in this procedure. These two operation errors increase the movement time of the robot and the coordinate reading time, during the error recovery task. A singularity algorithm, parameter algorithm and fuzzy control are studied so as to remove the disadvantages of geometric inverse kinematics. And the geometric straight line motion is studied so as to improve the disadvantages of the operation by a human.

• 대한수학교육학회지:학교수학
• /
• 제2권1호
• /
• pp.29-51
• /
• 2000

In this study, we tried to suggest an example of the analysis on the use of mathematical manipulatives. Taking algebra tiles as an example of mathematical manipulatives, we analysed several effects resulted from the use of algebra tiles. The algebra tiles make it possible to do activities that are needed to introduce and explain the distributive law and factoring. The algebra tiles have a several advantages; First of all, This model is simple. Even though they cannot make algebra easy, this model can play an important role in the transition to a new algebra course. This model provides access to symbol manipulation for students who had previously been frozen out of the course because of their weak number sense. This model provides a geometric interpretation of symbol manipulation, thereby enriching students' understanding, This model supports cooperative learning, and help improve discourse in the algebra class by giving students objects to think with and talk about. On the other hand, The disadvantages of this model are as follows; the model reinforces the misconception that -x is negative, and x is positive; the area model of multiplication is not geometrically sound when minus is involved; only the simplest expressions involving minus can be represented; It is ineffective when be used the learning of already known concept. Mathematics teachers must have a correct understanding about these advantages and disadvantages of manipulatives. Therefore, they have to plan classroom work that be maximized the positive effect of manipulatives and minimized the negative effect of manipulatives.

• 한국강구조학회 논문집
• /
• 제19권4호
• /
• pp.403-411
• /
• 2007

CFT(Concrete filled steel tube)기둥은 콘크리트와 강관의 이질적인 성질을 상호보완 할 수 있는 구조체 일뿐만 아니라 시공적인 측면에서도 공기단축으로 인한 공사원가 절감으로 인해 최근 널리 사용되고 있다. 그러나 기존CFT기둥은 강관의 항복이후 일정지점의 국부좌굴을 생기는 단점을 지니고 있다. 이를 개선하고자 본 연구에서는 예상국부좌굴위치에 탄소섬유쉬트로 보강을 한 TR(Tranversely reinforced) -CFT기둥에 대해 실험을 수행하였다. 실험변수는 콘크리트강도와 탄소섬유쉬트보강량이며 CFT실험체와 TR-CFT실험체의 이력곡선, 초기강성, 내력, 소성변형능력, 흡수에너지를 각각 비교분석하였다.