• Journal of the Korean Society of Industry Convergence
• /
• v.24 no.6_2
• /
• pp.883-890
• /
• 2021

In this study, joint analysis was conducted on the rock slope by aerial surveying using UAV. Aerial photos were taken using UAV to measure the directionality of the rock slope exposed to the site, and the directionality of the joint was analyzed using the photographed photos. UAV photography was taken under conditions of 90% overlap and an altitude of 50m. The photographing path was measured in the horizontal, vertical, and oblique directions based on the slope, and the joint characteristics were analyzed. Aerial surveying research on the joint directionality analysis of rock slopes is still incomplete, and the method for accurate joint directionality analysis is not presented strategically, so it is difficult to apply it in design. Through the results of this study, we would like to propose an flight photographing technique for the investigation of rock joints. As a result of the study, in the case of the joint investigation of the rock slope using UAV, it was necessary to change conditions such as altitude, aerial photography route, and overlap according to the size of the joint according to the site conditions.

• Journal of the Society of Naval Architects of Korea
• /
• v.41 no.1
• /
• pp.1-7
• /
• 2004

GUI program for analyzing directional spectrum waves is introduced in this paper Basically, MLM (Maximum Likelihood Method) was used for this program which was additionally consisted of performing spectral and time domain analysis for two dimensional irregular waves. Moreover, the directionality of directional spectrum waves generated by single summation and double summation method was investigated based on MLM. The directionality from each summation method has good agreement compared with that of target wave spreading function in the case of single wide directional spectrum waves. In addition to this, the resolution of directionality in double summation method was investigated as introducing coherence function between each wave component

• Journal of Korea Multimedia Society
• /
• v.22 no.6
• /
• pp.706-715
• /
• 2019

This research implemented grammatical rules for relationship extraction from class diagram candidate. The problem statement is generated by our algorithm to yield class diagram and candidate relationship candidates. The relationships of class diagrams are extracted automatically from the problem statement by using Natural Language Processing (NLP). The extraction used the grammatical rules that obtained from various sources and translated into our algorithm. The performance evaluation of the extraction algorithm used ATM problem statements. The application captures the problem statement and draws automatically the relations of class diagrams using Forced-Directionality Graph algorithm. The performance evaluations show refining methods for class diagram and relationships extraction improve recall score.

• Proceedings of the IEEK Conference
• /
• 2000.11d
• /
• pp.231-234
• /
• 2000

This paper has been studied a method that effectively displaying color image to monochromatic display such as PDA and movable-phone. Generally, the Floyd-Steinberg dithering algorithm has been used in this area and its' effectiveness were well known. But it shows some ugly patterns in white area and also shows some directionality in vertical and horizontal directions. To reduce those directionality, I suggest the error diffusion direction to be rotated randomly according to the bit value of the current position. This can also mitigate some ugly pattern in white area

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.54 no.1
• /
• pp.40-47
• /
• 2005

This paper concerns on Filtered-x least mean square (FXLMS) algorithm for adaptive estimation of feedforward control parameters. The conditions for convergence in ensemble mean of the FXLMS algorithm are derived and the directional convergence properties are discussed from a new geometric vector analysis. The convergence and its directionality are verified along with some computer simulations.

• Journal of the Korean Ceramic Society
• /
• v.24 no.1
• /
• pp.56-62
• /
• 1987

Tetragonal phase PZT ceramics with a tetragonality of c/a=1.027 to 1.041 were sintered at 1275$^{\circ}C$ for one hour. And the directionality of domain arrangement, microstructure, dielectric and aging properties were investigated. With increasing tetragonality, the directionality of domain arrangement of 180$^{\circ}$-domain on the surface is smaller than that in the internal part of specimens. Dielectric constants after poling are increased due to the increased internal energy or decreased due to the microcracks created by poling.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.13 no.2
• /
• pp.139-148
• /
• 2001

Phenomena induced by waves, such as overtopping, sediment transport, vibration/fluctuation and destruction of structures are highly influenced by the directionality of wave propagation. These phenomena are often dominated by non-linearity, and so hydraulic model experiments are widely adopted for stability analysis rather than numerical modeling, Thus, stability ofrubblc mound breakwaters(RMB) due to wavc directionality was experimentally investigated in this study. The incident wave angle $30^{\circ}$ was found more risky on the damage rate of RMB under directional regular waves, and the incident wave angle $40^{\circ}$ was found relatively risky under directional irregular waves. These results clarified the wave directionality effect on the stability ofRMB, These facts were found correspondent to the occurrence of the peak between $20^{\circ}$-$40^{\circ}$ with the directional frequency distribution of lIlO maximum water particle velocity.

• Structural Engineering and Mechanics
• /
• v.63 no.5
• /
• pp.647-657
• /
• 2017

To achieve this goal, two four-span concrete box-girder bridges with typical configurations of California highway bridges are selected as representative bridges: an integral abutment bridge and a seat-type abutment bridge. A detailed numerical model of the representative bridges is created in OpenSees to perform dynamic analyses. To examine the effect of earthquake incidence angle on the fragility of skewed bridges, the representative bridge models are modified with different skew angles. Dynamic analyses for all bridge models are performed for all earthquake incidence angles examined. Simulated results are used to develop demand models and component and system fragility curves for the skewed bridges. The fragility characteristics are compared with regard to earthquake incidence angle. The results suggest that the earthquake incidence angle more significantly affects the seismic demand and fragilities of the integral abutment bridge than the skewed abutment bridge. Finally, a recommendation to account for the randomness due to the ground motion directionality in the fragility assessment is made in the absence of the predetermined earthquake incidence angle.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2000.10a
• /
• pp.57-65
• /
• 2000

파형분석과 두 점을 잇는 파선추적은 진원요소 결정의 정확성을 향상시키는 주요한 요인이다. 본 연구에서는 3성분 지진기록의 직선형도(rectilinearity) 함수와 방향성(directionality)함수를 사용하여 파형분석한 결과와 두 점을 잇는 파선추적을 기존의 진원요소결정 프로그램에 적용하여 진원요소 결정의 정확성을 증가시켰다. 지진의 규모가 작을 때 Pn이 보이지 않고 PmP가 초동파로 기록된 것처럼 보인다. 이러한 지진에서는 주어진 진앙거리에서 최소 주행시간이 걸리는 P파와 S파의 초동파만 사용한 기존의 진원요소 결정 방법과 본 연구에서 PmP와 SmS를 사용한 결과는 매우 큰 차이를 보인다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.05a
• /
• pp.934-937
• /
• 2007

This study focused on investigating the effect of aligned cellulose fibers to the performance of EAPap actuator. The performance of EAPap is dependant on the material direction of cellulose film. Electrospinning was used to improve material directionality of EAPap. DMAc cellulose solution which cotton pulp was resolved in DMAc solvent was used for electrospinning cellulose film. To increase directionality of nano fibers, the Electrospun film was stretched by 10 % strain during drying process. Induced in-plane strain of Electrospun EAPap was proportional to the applied voltage and larger than that of spincast EAPap. It is concluded that the performance of EAPap was improved by aligning cellulose fibers.