• Journal of the Optical Society of Korea
• /
• 제15권2호
• /
• pp.187-195
• /
• 2011

We have designed two photonic crystal waveguide (PCW) structures with output focused beams in order to achieve more coupling between photonic devices and decrease the mismatch losses in photonic integrated circuits. PCW with coupled resonator optical waveguide (CROW) termination has been optimized by both one dimensional (1D) and seven dimensional (7D) particle swarm optimization (PSO) algorithms by evaluating the fitness function by the finite difference time domain (FDTD) method. The 1D and 7D-optimizations caused the factors of 2.79 and 3.875 improvements in intensity of the main lobe compared to the non-optimized structure, whereas the FWHM in 7D-optimized structure was increased, unlike the 1D case. It has also been shown that the increment of focusing causes decrement of the bandwidth.

• 전자공학회논문지A
• /
• 제31A권6호
• /
• pp.26-33
• /
• 1994

Much time and labor has been conventionally paid for fine adjustment of circuit elements by experience to improve the characteristics of Tap-off for CATV systems. To solve the problem, in this paper, the relations between the even- and odd-mode impedance. Z$_{oe}$ and Z$_{oo}$ of symmetrical 4-port coupled-line directional coupler and power dividing characteristics of Tap-off for CATV system have been derived. After the coupling, the reflectivity and the isolation are represented by Z$_{oe}$ and Z$_{oo}$ only, the fine adjustment of all S-parameters can be performed by controling the elements of Z$_{oe}$ and Z$_{oo}$ only. Furthermore, the validity of the new fine adjustment method proposed here has been confirmed by experiments.

• 대한조선학회지
• /
• 제23권3호
• /
• pp.1-9
• /
• 1986

Herein the dynamic response of an axisymmetric buoy to regular wave is studied within linear potential theory. The buoy has a particular geometry so that it should experience minimum wave-exiting force on the vertical direction at a precribed wave number in water of finite depth. Invoking the Green's theorem a velocity potential is generated by distributing pulsating sources and doublets on the immersed surface of the buoy at its mean position. Hydrodynamic forces and moments are obtained approximately by summation of the products of linear pressure and directional mesh area over the immersed surface. Model tests are carried out to measure the wave-exciting forces, hydrodynamic forces and motion responses. The experimental results in general agree fairly well with the numerical ones. From the analytical and experimental works it is found that the pitching motion and its coupling effect affect significantly the motion characteristics of the freely-floating axisymmetric buoy in regular waves.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2007년도 하계학술대회 논문집
• /
• pp.347-349
• /
• 2007

Charge equalization scheme for HEV lithium-ion battery system is proposed in this paper, where all the primary windings with in parallel bi-directional switches are coupled in series to provide the equalizing energy from the whole battery string to the specific under charged cells. Moreover, to realize minimized size of equalization circuit employing the proposed cell balancing scheme, the optimal power rating design rule according to equalization time and SOC distribution of imbalance is proposed. A prototype of HEV lithium-ion battery system of four cells shows the outstanding charge equalization performance while maintaining greatly reduced size of cell balancing circuit.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.260-261
• /
• 2007

본 논문에서는 800MHz와 1.9GHz 대역의 시스템에 적용할 수 있는 20dB 방향성 결합기를 8층 PCB 기판에 내장하여 소형화 및 저가화 할 수 있도록 설계하였다. 방향성 결합기는 4층과 6층에 coupled line으로 적층함으로써, 다층 PCB기판을 최대한 활용하여 공간을 최소화하였다. 또한, 고유전율을 가진 필름을 이용하여, coupled line의 끝에 내장형 고용량 커패시터를 연결하여 설계하였다. 6 $\times$ 6 $\times$ 0.7 (height)$mm^3$ 크기로 설계된 방향성 800MHz 결합기의 경우 -20dB의 coupling 특성, -0.6dB의 transmission 특성, -25dB의 isolation 특성을 나타내었다. 패키징 기판에 내장된 방향성 결합기는 단말기 및 통신시스템의 소형화에 크게 기여할 수 있을 것이다.

• Journal of the Optical Society of Korea
• /
• 제6권2호
• /
• pp.27-32
• /
• 2002

An integrated optical 2$\times$2 add/drop multiplexer in X-cut, Y-propagating LiNbO$_3$ has been demonstrated. The device consists of passive polarization splitters and acousto-optical mode converters with weighted coupling utilizing tapered acoustical directional couplers; their specific design and properties are discussed. The insertion loss has been measured to be about -8.16 ㏈ and -8.6 ㏈ for TE and TM polarizations, respectively. The device shows a 3 ㏈ bandwidth of 2.3 nm, a tuning rate 8.34 nm/MHz around λ = 1554 nm, and a sidelobe suppression of about 14.5 ㏈. Optimum operation is achieved with a RF drive power of about 43 ㎽. Multi-wavelength operation has been demonstrated.

• Current Optics and Photonics
• /
• 제1권1호
• /
• pp.60-64
• /
• 2017

We have considered optical nonlinearities of coupled quantum dots theoretically, where an exciton dipole-dipole interaction is mediated between the adjacent large and small quantum dots. For increasing a pump pulse area in resonance with the large quantum dot exciton the induced nonlinear refractive index of the small quantum dot exciton has been obtained. As the exciton dipole-dipole interaction depends on the relative orientation of two exciton dipoles, the optical nonlinearities for the directions parallel and perpendicular to the coupling axis of the two quantum dots are compared. The directional imbalance of optical nonlinearities in coupled quantum dots can be utilized for a polarization phase modulator by controlling a pump pulse area and propagation length.

• Journal of Advanced Marine Engineering and Technology
• /
• 제34권6호
• /
• pp.846-851
• /
• 2010

광섬유형 결합기의 끝단면을 이용한 액체-공기 경계면 감지 센서를 제안하고 특성을 시험하였다. 이 센서 시스템의 원리는 광섬유 끝단의 경계면에 접촉하는 물질의 굴절률 변화에 따라 발생하는 추가적인 광 손실을 이용하는 것이다. 각각 다른 광 분배비를 가지는 다섯 가지의 광섬유형 결합기를 이용하여 물과 공기에 접촉하였을 때의 스펙트럼 응답 특성을 측정하고 분석하였다. 이 실험결과는 다중 센서헤드를 가지는 센서 시스템을 개발할 경우 결합기의 광 분배비를 결정하는데 유용하게 사용되어질 것이다. 제안된 센서 구조를 이용하여 다중센서 배열을 위한 결합기 선택에 활용될 수 있기를 기대한다. 또한 다중지역에서 동시에 발생하는 홍수나 침수을 감시하는 모니터링 시스템에 적용될 수 있다.

• 한국농공학회지
• /
• 제34권1호
• /
• pp.78-86
• /
• 1992

This paper aims at investigating the effect of steel ratio and the magnitude of edge-ratio on the mechanical characteristics of reinforced concrete ring sector plate. The influence of steel bars was taken into account by coupling stiffness matrix of the steel bar element with that of the concrete plate element without dealing with separate element of steel bar and by establishing the composite stiffness matrix, which leads to the desirable result which does not increase th number of element could be obtained. Through case studies with 6 cases various steel ratios in ring sector plate supported at four edges and 4 cases with different open angles, the influence of the steel ratio was examined. A numerical analysis to find out the effect of the steel ratio d ue to above mentioned cases was carried out by 4 boundary conditions ; all edges clamped (B.C-1), all edges simply supported (B.C-2), curvilinear two edges clamped and other edges free (B.C-3) and curvilinear two edges simply supported and other edges free(B.C-4). The main results obtained are summarized as follows : 1. The effect of steel ratio on the magnitude of lateral deflection and x-directional bending moment at the center of sector plate and the midpoint of outer and inner curvilinear edges is almost the same up to $30^{\circ}$ of open angle. Beyond $30^{\circ}$ of the angle, the larger the angle, the greater the effect of ratio. 2. In design works using balanced steel ratio, the effect of steel bar can be ignored. But for larger open angles, especially greater than $90^{\circ}$, it proves desirable to consider the effect of steel bar. 3. The effect of the arc length of center circle/straight edge on lateral deflection and bending moment is remarkable in B.C-2. For larger open angle, the effect is also noted except for B.C-3 which turn out hardly affected. 4. The effect of the radius of curvature/straight side length on lateral deflection and x-directional bending moment is noted in B.C-2. As open angle increases, B.C-1 and B.C-3 almost agree and B.C-2 approaches B.C-4.

• 한국광학회지
• /
• 제11권5호
• /
• pp.335-339
• /
• 2000

본 논문에서는 2" BK7 유리 기판에 $Ag^+-Na^+$ 이온교환법을 이용한 $1.31/1.55\mu\textrm{m}$ 두파장 방향성 광 결합기를 제작하였다. 제작 및 모델링 조건으로는 이온교환 온도 $340^{\circ}C$, 이온교환 시간 12h, 확산이온농도 0.67[MF]-NaNO3+0.33[MF]-KNO3+1$\times$-3[MF]-AgNO3, 이었으며 굴절율의 분포는 폭 방향으로는 가우시안 함수로, 깊이 방향으로는 에러 함수 분포로 근사화 하였다. 광 결합기를 구성하는 채널 도파로의 폭은 단일 모드 조건으로부터 $4\mu\textrm{m}$이었고 간격은 $8\mu\textrm{m}$이었다. 제작된 소자의 전체 길이는 16mm이었으며 광 결합길이는 12.6mm이었고 $1.31/1.55\mu\textrm{m}$ 두파장에서 각각 18dB이상의 소멸비를 나타내었다.