• 한국광물학회지
• /
• 제31권3호
• /
• pp.161-172
• /
• 2018

멀티 앤빌 프레스(multi-anvil press)는 일반적으로 5-25 GPa의 압력범위와 ${\sim}2,300^{\circ}C$의 온도범위를 구현할 수 있는 고압 기기로, 지구과학에서는 상부맨틀-맨틀전이대까지의 지구 구성물질의 구조를 연구하는 데 도움이 된다. 본 연구에서는 광물의 상전이를 이용한 멀티 앤빌 프레스에 대한 압력-부하 보정(pressure-load calibration) 과정을 소개하고, 시료실(sample chamber) 내에 존재할 수 있는 온도구배에 대해서 논의하였다. 압력-부하 보정은 14/8 G2, 14/8 step, 14/8 HT 조립세트(assembly set)와 18/12 조립세트에 대해 1,100톤 멀티 앤빌 프레스를 이용하여 수행했다. 초기 물질로 석영, 규회석구조의 $CaGeO_3$, 포르스테라이트를 사용했고, 고압상의 동정은 XRD 분석을 통해 수행하였다. 광물의 상전이를 통해 $1,200^{\circ}C$에서 시료에 가해지는 압력을 유추할 수 있었으며, ${\alpha}$-석영에서 코에사이트로의 상전이는 3.1 GPa, 석류석 구조의 $CaGeO_3$에서 페로브스카이트 구조의 $CaGeO_3$로의 상전이는 5.9 GPa, 코에사이트에서 스티쇼바이트로의 상전이는 9.2 GPa, 포르스테라이트에서 와즐리아이트로의 상전이는 13.6 GPa의 압력 확인에 이용했다. XRD 결과로 획득한 압력-부하 보정 곡선은 기존에 보고된 유사한 기기의 압력-부하 보정 곡선에 비해 동일 압력을 구현하기 위해 50톤 가량의 유압이 더 필요한 것으로 확인됐다. 이러한 차이는 시료실의 크기 및 조립세트의 압력 매체(pressure medium)와 이차앤빌 사이의 마찰력으로부터 기인한 유압 손실에 의한 것으로 생각된다. 또한 본 연구에서는 14/8 HT 조립세트에서의 시료실 내의 온도구배를 확인했다. 특히 열전대(thermocouple)의 위치 변화에 따라 시료실 높이에 평행한 방향으로 약 ${\sim}200^{\circ}C/mm$에 해당하는 온도구배가 존재한다. 본 연구로부터 구한 멀티 앤빌 프레스의 압력-부하 보정 곡선과 시료실 내의 온도구배 값은 앞으로 맨틀 내에서의 다양한 비정질 및 결정질의 지구물질에 대한 원자 구조의 변화와 그에 따른 물성 변화를 설명하는 데 적용할 수 있다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1629-1632
• /
• 2003

A technique is presented for generating a compound human motion from its primitive motions obtained by a motion capture system. Some human fundamental motions are modeled in a 3-D way and registered as primitive motions. Because the factorization method is used for the motion capture, calibration of video cameras and connection of the motion in the direction of time is both unnecessary. Employing these motions, various compound human motions are generated by connecting the motions after having applied rotation and parallel transformation to them. Linear interpolation is done at the discontinuous boundary between primitive motions and smooth connection is achieved. Experimental results show satisfactory performance of the proposed technique. The technique may contribute to producing various complicated human motions without much effort using a strict motion capture system.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.2555-2559
• /
• 2003

In this study, we develop an automatic sorting system, which is mostly affected by frictional forces between a veneer and friction-generating device. So we will make a suitable dynamic model and mechanism to control friction force using a AC servo-motor. We suggest Stick friction and Column friction model, which is occurred between roller and veneer and within veneers as well. A kind of sensor can get the velocity of roller and movement of roller vertical direction. We assume that the several things to simplify the complicate and difficult nonlinear friction phenomenon. And to create an optimal normal force, which can generate a suitable friction force, we control the movement of sorting roller and supporter as well. We introduce several results about a friction character and suggest the value of calibration of sorting roller movement and supporters as well.

• 대한기계학회논문집A
• /
• 제21권3호
• /
• pp.477-484
• /
• 1997

This paper describes the build-up force measuring system of 9.9 MN capacity which consists of nine force transducers of each having 1.1 MN capacity. We have specially designed a force transducer for a build-up force measuring system to reduce the uncertainty of a build-up system and to accomodate the new test procedure for a build-up system. It reveals that the relative uncertainty of the force measuring system is less than 1.5*10$^{-4}$ in the ran9e of 1-4.5 MN irrespective of loading direction. The force measuring system may be used to calibrate a 10 MN force standard machine to be used as a large force standard in Korea.

• 전자공학회논문지
• /
• 제50권7호
• /
• pp.231-235
• /
• 2013

Lens distortions have a significant impact on captured or projected image geometry. This paper proposes a lens distortion correction with gradient components for wide-angle lenses. In most cases, distortion coefficients are estimated using a distortion model by point correspondences. Corrected images using only point correspondences can be compensated excessively, therefore, producing bended lines into the opposite direction near the corners. To curtail these phenomena, we propose to adopt the gradient components in addition to positions to obtain the distortion coefficients. We verified the improved accuracy and the straightness of the proposed method through experimentation.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2000년도 유체기계 연구개발 발표회 논문집
• /
• pp.65-74
• /
• 2000

A five path ultrasonic and/or magnetic flowmeter were installed after valve. Five path ultrasonic flowmeter were tested to obtain it's performance in a water flow standard system and magnetic flowmeter. It's varied with straight pipe length(nD), install direction and valve position. All the results are summerized. The multi-path flowmeters(MUF) showed up to $\pm0.5{\%}$ at a 2, 4, 8, 15D spacing : the MUF was significantly better than magnetic flowmeter at disturbed flow conditions.

• 대한기계학회논문집B
• /
• 제21권11호
• /
• pp.1449-1457
• /
• 1997

Since a non-nulling method of five-hole probes is valid only when the flow angle is within the calibrated angle range, it can not be used in a complex flow field. Full angle range pressure coefficient maps show that widely used nulling methods do not guarantee correct alignment of the probe with the flow direction in the unknown complex flow field. Zone decision method and features of zone map were studied by investigating the full angle range pressure coefficient maps. A reliable and efficient new nulling algorithm using zone decision by pressure ordering is proposed and verified. Since the zone decision method by pressure ordering can decide whether the flow is within the calibration angle range or not, it is useful in wide angle nonnulling methods, too.

• 한국기계가공학회지
• /
• 제13권2호
• /
• pp.28-34
• /
• 2014

A non-contact type measurement system is specially devised to measure the width of a piston ring groove in the grinding process. This system comprises a line camera with an imaging lens, collimated white light source, and a one axis translation stage. When the measurement system movesalong the diagonal direction of the cylinder, the line camera captures an image. By analyzing such images, the width of the piston ring groove can be determined. The experimental results prove that the proposed system is useful, especially as a monitoring system in grinding piston ring grooves on cylinders with accuracy of several micrometers in an area of dozens of millimeters.

• International Journal of Precision Engineering and Manufacturing
• /
• 제7권2호
• /
• pp.56-59
• /
• 2006

A vibrational model of powder transfer equipment based on the lumped parameter method was developed, in which the operating motion consists of surging, bouncing, and pitching. After decoupling the equation of motion, the vibrational excitation source of the pitching motion was removed. So the designers are able to plan the optimum design to adjust the motion trajectory of the powder transfer equipment. That is, a procedure to adjust the motion trajectory of powder transfer equipment by changing design specifications such as the installation position, the direction of the motor, the driving speed, the mass unbalance, the stiffness coefficient, and the installation position of the support spring, is presented in this paper. The powder transfer equipment manufactured according to the results of this study did not suffer fatigue destruction, since the maximum stress on the basket structure was sufficiently small.

• 한국정밀공학회지
• /
• 제20권8호
• /
• pp.101-107
• /
• 2003

A new mechanical probe for 3-D feature measurement on coordinate measuring machines (CMMs) is presented. The probe is composed of the contact stylus and the three-component force sensor. With the stylus mounted on the force sensor, the probe can not only measure 3-D features, but also detect contact force acting on the stylus tip. Furthermore, the probing direction and the actual contact position can be determined by the relationship among three components of contact force to be detected. In this paper, transformation matrix representing the relationship between the external force acting on the stylus tip and the output voltages of measurement gauges is derived and calibrated. The prototype of probe is developed and its availability is investigated through the experimental setup for calibration test of the probe. A series of experimental results show that the proposed probe can be an effective means of improving the accuracy of touch probing on CMM.