• 제목/요약/키워드: direct tunnel

검색결과 198건 처리시간 0.03초

통기성 간이 피복재의 피복방법이 저온기에 잎상추의 생육, 수량 및 품질에 미치는 영향 (Effect of Covering Methods with Ventilating Non-Woven Fabric on the Growth and Yield in Leaf Lettuce during Low Temperature Season)

  • 안종길;최영환
    • 생물환경조절학회지
    • /
    • 제11권2호
    • /
    • pp.88-92
    • /
    • 2002
  • 저온기에 통기성 간이 피복재의 피복방법에 의한 보온환경이 잎상추의 생육촉진에 미치는 영향을 구명하기 위하여 농PO계 필름하우스내에서 '파스라이도' 피복재를 이용하여 직접피복, 터널피복 및 직접+터널피복 처리구 하에서 10월 13일부터 10월 31일가지 18일간 청상추와 적상추를 재배하여 그 효과를 검토하였다. 평균기온, 지온, 엽온과 상대습도는 피복의 효과가 현저하여, 직접+터널, 직접피복, 터널피복 및 대조구의 순으로 높았으며, 광합성유효광량자속은 역순위였다. $CO_2$의 농도는 주간보다 야간에 현저히 증가하였는데, 직접피복에서 가장 높았으며, 다음은 직접+터널피복, 터널피복, 대조구의 순으로 높았으나 그 차이는 매우 낮았다. 청상추와 적상추의 초장, 엽수 및 엽면적 등은 직접+터널, 직접피복, 터널피복의 순으로 촉진되었으나 통계적인 유의차는 없었다.

Orientation Dependent Directed Etching of Aluminum

  • Lee, Dong Nyung;Seo, Jong Hyun
    • Corrosion Science and Technology
    • /
    • 제8권3호
    • /
    • pp.93-102
    • /
    • 2009
  • The direct-current electroetching of high purity aluminum in hot aqueous-chloride solution produces a high density of micrometer-wide tunnels whose walls are made up of the {100} planes and penetrate aluminum in the <100> directions at rates of micrometer per second. In the process of the alternating-current pitting of aluminum, cathodic polarization plays an important role in the nucleation and growth of the pits during the subsequent polarization. The direct-current tunnel etching and alternating-current etching of aluminum are basically related to the formation of poorly crystallized or amorphous passive films. If the passive film forms on the wall, a natural misfit exists between the film and the aluminum substrate, which in turn gives rise to stress in both the film and the substrate. Even though the amorphous films do not have directed properties, their stresses are influenced by the substrate orientation. The films on elastically soft substrate are likely to be less stressed and more stable than those on elastically hard substrate. The hardest and softest planes of aluminum are the {111} and {100} planes, respectively. Therefore, the films on the {111} substrates are most likely to be attacked, and those on the {100} substrates are least likely to be attacked. For the tunnel etching, it follows that the tunnel walls tend to consist of the {100} planes. Meanwhile, the tunnel tip, where active corrosion takes place, tend to be made of four closely packed {111} planes in order to minimize the surface energy, which gives rise to the <100> tunnel etching.

성형 VPN 구조에서의 주문형 터널 생성 메커니즘 (On-Demand Tunnel Creation Mechanism in Star VPN Topology)

  • 변해선;이미정
    • 한국정보과학회논문지:정보통신
    • /
    • 제32권4호
    • /
    • pp.452-461
    • /
    • 2005
  • 성형(Star) VPN(Virtual Private Network) 구조에서는 통신하는 두 CPE(Customer Premise Equipment) VPN GW(Gateway) 간 발생하는 트래픽이 항상 Center VPN GW를 거쳐서 전송되므로 비효율적인 트래픽 전송이 이루어진다. 또한 Center VPN GW에서의 패킷 프로세싱으로 인한 과부하도 발생한다. 이를 해결하기 방안으로 IPSec(IP Security)의 IKE(Internet Key Exchange) 메커니즘을 이용하여 통신하는 두 CPE VPN GW 간 직접터널을 설립할 수 있으나 이 경우에는 터널 설립 및 관리가 복잡하고 오버헤드가 크다 이에 본 논문에서는 통신하는 CPE VPN SW 간에 자동적으로 직접터널을 설립할 수 있게 하는 SVOT(Star VPN On-demand Tunnel) 방안을 제안한다. SVOT 방안에서는 CPE YPN GW가 트래픽 모니터링 정보를 기반으로 직접터널을 설립할 것인지를 판단한다 CPE VPN GW는 Center VPN GW로부터 터널 설립에 필요한 제반정보들을 제공받아 상대 CPE VPN GW와 직접터널을 설립한다. 시뮬레이션을 통해 제안하는 방안에 대하여 성능을 조사하였고, 이와 함께 기본적으로 Center VPN GW를 통하여 모든 트래픽이 전송되는 성형 VPN 구조, 모든 CPE VPN GW간 풀-메시(Full-mesh)로 터널 연결 정보를 유지하고 있는 풀-rll시 VPN 구조와 성능을 비교하였다. 시뮬레이션 결과, 제안하는 SVOT 방안이 기본적인 성형 VPN 구조에 비해 확장성과 트래픽 전송효율성, Center VPN GW의 과부하를 방지하는 측면에서 우수한 성능을 보이면서 종단간 지연 및 처리율에 있어서는 풀-메시 VPN 구조와 거의 비슷한 성능을 보임을 확인할 수 있었다.

FLAC을 이용한 직접법 역해석 소프트웨어의 개발과 검증 (Verification of Direct Back Analysis Software Using FLAC as a Subroutine)

  • 김치환
    • 터널과지하공간
    • /
    • 제15권5호
    • /
    • pp.344-351
    • /
    • 2005
  • 터널 시공 중 계측한 변위 등으로 터널의 안정성을 재평가하기 위해 심플렉스 이론을 기초로 직접법 역해석 소프트웨어를 개발하고 그 정확성을 12 가지 조건에서 검증하였다. 이 소프트웨어는 FLAC을 부프로그램(subroutine)으로 하고 그것에 내장된 전산언어를 이용한 것이다. 변위 수 3-240개로 구성된 여러 가지 변위조합에 대한 역해석 검증결과 터널 주변의 계측위치와 입력변위의 개수에 관계없이 암반의 탄성계수와 초기응력 비를 구할 수 있었고 반복계산을 위한 출발값의 탄성계수와 초기응력 비에 관계없이 정해에 안정적으로 수렴되는 것을 확인하였다.

주관상동맥-폐동맥 이상연결증의 외과적 수술요법 (Surgical Treatment of Anomalous Connection of Left Coronary Artery to the Pulmonary Artery [ALCAPA])

  • 이정렬
    • Journal of Chest Surgery
    • /
    • 제26권3호
    • /
    • pp.228-233
    • /
    • 1993
  • Patients with anomalous connection of the left coronary artery to the pulmonary artery are at risk for myocardial infarction, and early or sudden death. Between 1986 to 1992, a total of 4 of these patients underwent surgical intervention with various operative techniques at our institution. Age at operation ranged from 2 months to 43 years. Three infant patients had congestive heart failure, 2 of them had mitral regurgitaion, and 1 had ST-T change on elctrocardiogram. Operative techniques included direct coronary artery transfer to the aorta[n=2], intrapulmonary tunnel from the aortopulmonary window[n=1], coronary artery bypass using saphenous vein[n=1]. One deaths occured at 2 weeks after direct coronary arterial transfer due to respiratory failure caused by Respiratory Syncitial virus pneumonia. Supravalvar pulmoanry stenosis occured after intrapulmoanry tunnel. We recommend direct aortic implatation of the anomalous coronary artery at the time of diagnosis. Intrapulmonary tunnel from aortopulmonary window or subclavian-coronary anastomosis could be alternatives in whom aortic implantation is not feasible anatomically.

  • PDF

FLAC을 이용한 터널 역해석 프로그램의 개발 (Development of a Back Analysis Program for Rock Tunnel using FLAC)

  • 양형식;전양수
    • 터널과지하공간
    • /
    • 제12권1호
    • /
    • pp.37-42
    • /
    • 2002
  • 본 연구에서는 터널의 주요 설계정수인 탄성계수와 측압계수를 산정 할 수 있는 역 해석 알고리즘을 개발하였다. 해석 알고리즘은 범용 유한차분해석 프로그램인 FLAC의 해석과정 내에 직접탐색법 알고리즘을 이용한 FISH 문을 삽입함으로써 구성하였다. 기존 연구에서 사용한 탄성모델에 대하여 본 연구에서 개발한 역 해석 알고리즘의 적합성을 검토하였다. 본 연구에서 개발된 역 해석 알고리즘은 기존 역 해석 기법에 비해 더 적은 반복연산에 더 정확한 결과를 얻을 수 있음을 확인하였다.

Numerical simulation of the effect of confining pressure and tunnel depth on the vertical settlement using particle flow code (with direct tensile strength calibration in PFC Modeling)

  • Haeri, Hadi;Sarfarazi, Vahab;Marji, Mohammad Fatehi
    • Smart Structures and Systems
    • /
    • 제25권4호
    • /
    • pp.433-446
    • /
    • 2020
  • In this paper the effect of confining pressure and tunnel depth on the ground vertical settlement has been investigated using particle flow code (PFC2D). For this perpuse firstly calibration of PFC2D was performed using both of tensile test and triaxial test. Then a model with dimention of 100 m × 100 m was built. A circular tunnel with diameter of 20 m was drillled in the middle of the model. Also, a rectangular tunnel with wide of 10 m and length of 20 m was drilled in the model. The center of tunnel was situated 15 m, 20 m, 25 m, 30 m, 35 m, 40 m, 45 m, 50 m, 55 m and 60 m below the ground surface. these models are under confining pressure of 0.001 GPa, 0.005 GPa, 0.01 GPa, 0.03 GPa, 0.05 GPa and 0.07 GPa. The results show that the volume of colapce zone is constant by increasing the distance between ground surface and tunnel position. Also, the volume of colapce zone was increased by decreasing of confining pressure. The maximum of settlement occurs at the top of the tunnel roof. The maximum of settlement occurs when center of tunnel was situated 15 m below the ground surface. The settlement decreases by increasing the distance between tunnel center line and measuring circles in the ground surface. The minimum of settlement occurs when center of circular tunnel was situated 60 m below the surface ground. Its to be note that the settlement increase by decreasing the confining pressure.

통기성 부직포의 피복방법 및 $\textrm{GA}_3$ 처리가 저온기에 잎상추의 생육 및 수량에 미치는 영향 (Effect of Covering Method of Ventilating Non-Woven Fabric and $\textrm{GA}_3$ Treatment on the Growth and Yield of Leaf Lettuce during Low Temperature Season)

  • 최영환;손병구;강점순;안종길
    • 생물환경조절학회지
    • /
    • 제12권2호
    • /
    • pp.72-76
    • /
    • 2003
  • 동계의 노지 및 무가온 하우스 재배시에 통기성 간이 피복재의 효과적인 보온방법과 GA$_3$ 처리로 일상추의 생육 촉진효과를 구명하기 위하여 공시재료를 청치마상추와 적치마상추로 하였다. 농PO계 필름하우스 내에서 ‘파스라이도’ 피복재를 이용하여 10월 26일부터 처리한 직접피복(1), 11월 5일부터 처리한 직접피복(2) 및 터널피복 후, 수확 일주일 전에 GA$_3$를 식물체에 엽면살포하여 그 효과를 조사하였다. 평균기온과 상대습도는 대체로 직접+터널피복, 직접피복 및 대조구의 순으로 높았다. 청치마상추와 적치마상추의 생육은 대체로 직접+터널피복, 직접피복(1), 직접피복(2), 터널피복, 대조구의 순이었고, 또 GA$_3$처리는 생육을 촉진시켰다. 엽록소 함량은 대조구, 터널피복, 직접피복(2), 직접피복(1), 직접+터널피복의 순으로 높았다 GA$_3$천리에 의해서 엽록소의 함량은 반대로 저하하였다. 청치마상추와 적치마상추의 생체중은 직접+터널피복, 직접피복(1). 직접피복(2), 터널피복, 대조구의 순이었고 건물중도 같은 경향이었다. GA$_3$처리는 생체중과 건물중을 약간 증가시켰다. 그러나 대조 구간에 비교한 결과 적치마상추의 생체중과 건물중이 청치마상추보다 낮았다

터널 건전도 평가를 위한 라이닝 모델실험 (Model Test of Lining for Estimation of Tunnel Soundness)

  • 김영근
    • 자연, 터널 그리고 지하공간
    • /
    • 제1권2호
    • /
    • pp.59-71
    • /
    • 1999
  • Recently, many deformations in tunnel such as crack and leakage were occulted. Specially, the defects of tunnel lining have been a serious problem in safety and stability many repair works for maintenance in tunnel have been carried out. Therefore, it is necessary to estimate the structural cracking for countermeasure in deformed tunnel and to investigate on the characteristics of lining system and the soundness of tunnel. In this study model tests for tunnel lining were carried out using test apparatus and centrifuge, In the direct loading test, the prototype was Kyungbu high-speed railway tunnel and the scale is 1/10, and lining models were made of concrete. Test conditions included load conditions such as direction, shape and type, lining conditions such as single and double lining, thickness, and reinforcement. In centrifuge model test, the prototype was Seoul subway tunnel and the scale is 1/100, and lining models were made of aluminum and hydrostone. Test conditions included tunnel defects such as thickness shortage. behind cavity and longitudinal cracks, reinforcement methods such as epoxy, grouting and carbon sheet. From these model tests , the characteristics of deformation and failure for tunnel lining were estimated, and the structural behaviors of deformed lining and the effects of repair and reinforcement for tunnel lining were researched.

  • PDF

교통류 보존형 터널단면 확대 시공기술의 경제적 타당성 분석 (Economic Feasibility Analysis of a Tunnel Section Enlargement Method That Does Not Halt Traffic Flow)

  • 이승수;김동규;서종원
    • 지질공학
    • /
    • 제25권4호
    • /
    • pp.459-472
    • /
    • 2015
  • 최근 국내에서 프로텍터를 사용하여 터널의 확대 공사기간 동안 기존 교통흐름을 유지할 수 있는 교통류 보존형 터널 확대 시공기술이 개발되었다. 이 공법은 교통의 흐름을 그대로 유지하여 교통정체에 따른 통행자의 시간적, 비용적 손실과 환경적 피해 등의 사회적 손실을 최소화 할 수 있다는 장점이 있다. 반면에 프로텍터의 설치 등으로 공사기간의 연장 및 직접공사비의 증가가 발생된다. 본 논문은 교통류 보존형 터널 확대 시공기술의 직접공사비와 간접적 사회적 비용을 모두 고려하여 경제적 타당성을 분석하기 위한 방법을 제시하는 것을 목표로 하였다. 사회적 비용을 차량운행비용, 시간지연비용 및 환경오염비용으로 구분하여 간접비를 산정하는 방법을 제시하였다. 그리고 기존의 확대공법과 신공법간의 경제성을 비교하기 위하여 남산3호터널을 대상으로 제시된 방법을 적용하여 분석해 보았다.