• 제목/요약/키워드: direct integration methods

검색결과 95건 처리시간 0.026초

직접적분법과 확률론적 유한요소법을 이용한 구조물의 확률론적 동적 해석 (Developing A Stochastical Dynamic Analysis Technique for Structures Using Direct Integration Methods)

  • 이정재
    • 한국농공학회지
    • /
    • 제36권1호
    • /
    • pp.54-62
    • /
    • 1994
  • The expanding technique of the Stochastic Finite Element Method(SFEM) is proposed in this paper for adapting direct integration methods in stochastical dynamic analysis of structures. Grafting the direct integration methods and the SFEM together, one can deal with nonlinear structures and nonstationary process problems without any restriction. The stochastical central diffrence and stochastic Houbolt methods are introduced to show the expanding technique, and their adaptabilities are discussed. Results computed by the proposed method (the Stochastic Finite Element Method in Dynamics: SFEMD) for two degree-of-free- dom system are compared with those obtained by Monte Carlo Simulation.

  • PDF

Houbolt 직접적분법의 시간증분에 관한 연구 (Study on the Time Increments in the Houblot Direct Integration Method)

  • 손주리;신중호
    • 한국기계연구소 소보
    • /
    • 통권18호
    • /
    • pp.55-66
    • /
    • 1988
  • Many direct integration methods are used for numerical analyses of dynamic motion. In these methods, the governing equations of a dynamic system are integrated successively using a step-by-step numerical integration procedure. Time derivatives in the equations are generally approximated using difference formulas involving one or more increments of the time. Time increment has closely relationship with the accuracy of the motion analysis. In this paper, a 4th order Houbolt direct integration method is derived. For a spring-mass system, the motion of the system are analyzed from the 3rd order Houbolt and the 4th order Houbolt approaches respectively. Finally the paper proposes the optimal time-increment based on the accuracy of numerical analyses.

  • PDF

Integrated equations of motion for direct integration methods

  • Chang, Shuenn-Yih
    • Structural Engineering and Mechanics
    • /
    • 제13권5호
    • /
    • pp.569-589
    • /
    • 2002
  • In performing the dynamic analysis, the step size used in a step-by-step integration method might be much smaller than that required by the accuracy consideration in order to capture the rapid chances of dynamic loading or to eliminate the linearization errors. It was first found by Chen and Robinson that these difficulties might be overcome by integrating the equations of motion with respect to time once. A further study of this technique is conducted herein. This include the theoretical evaluation and comparison of the capability to capture the rapid changes of dynamic loading if using the constant average acceleration method and its integral form and the exploration of the superiority of the time integration to reduce the linearization error. In addition, its advantage in the solution of the impact problems or the wave propagation problems is also numerically demonstrated. It seems that this time integration technique can be applicable to all the currently available direct integration methods.

직접적분법의 비교 (comparison of direct Integration methos)

  • 지현우
    • 한국지진공학회:학술대회논문집
    • /
    • 한국지진공학회 1999년도 추계 학술발표회 논문집 Proceedings of EESK Conference-Fall
    • /
    • pp.155-161
    • /
    • 1999
  • Many direct integration methods have been developed for dynamic analysis of structures, In order to compare each other methods and give guideline for selecting a time increment the amplification matrix is constructed according to algorithm of each method and stability and accuracy analysis is done. Four story shear building under external excitations is analyzed by each method and the RMS errors of displacements of top floor and compared with each other.

  • PDF

Extended implicit integration process by utilizing nonlinear dynamics in finite element

  • Mohammadzadeh, Saeed;Ghassemieh, Mehdi;Park, Yeonho
    • Structural Engineering and Mechanics
    • /
    • 제64권4호
    • /
    • pp.495-504
    • /
    • 2017
  • This paper proposes a new direct numerical integration algorithm for solving equation of motion in structural dynamics problems with nonlinear stiffness. The new implicit method's degree of accuracy is higher than that of existing methods due to the higher order of the acceleration. Two parameters are defined, leading to a new family of unconditionally stable methods, which helps to take greater time steps in integration and eliminate concerns about the duration of solving. The method developed can be utilized for a number of solid plane finite elements, examples of which are given to compare the proposed method with existing ones. The results indicate the superiority of the proposed method.

지반-구조물 연계모델의 등가감쇠값에 관한 연구 (A Study on Equivalent Modal Damping Values of Soil-Structure Coupling Models)

  • 박형기
    • 대한토목학회논문집
    • /
    • 제7권3호
    • /
    • pp.241-248
    • /
    • 1987
  • 지반-구조물 상호작용 효과가 큰 경우의 동적문제를 모드중첩법으로 해결하기 위하여 여러 가지 등가모드감쇠값 결정 방법에 대한 이론적 배경을 검토하였다. 또한 component mode synthesis method에 의하여 감쇠행렬을 구하고 이를 이용한 직접적분법으로 지반-구조물의 연계모델의 응답을 계산하여 각 등가모드감쇠값 결정 방법으로 구한 등가모드감쇠값을 사용한 모드 중첩법의 해석 결과와 비교 분석하였다. 해석모델로는 2종류의 상부구조와 4종류의 지반조건을 고려하고 이를 조합한 경우를 채택하였다. 본 연구 결과로 소멸에너지법으로 얻은 등가모드감쇠값이 직접적 분법의 결과에 가장 근사적인 결과를 주는 것을 알 수 있었다. 고정지반모델인 경우에는 강도가중법을 제외한 다른 방법으로 구한 등가모드감쇠값은 직접적분법의 결과와 거의 일치되는 응답을 주었다.

  • PDF

대칭 및 비대칭 유동장에서 다회선 초음파 유량계의 유속분포 적분 방법 평가 (Performance Evaluation of the Velocity Profile Integration for the Multi-Path Ultrasonic Flowmeter in Symmetric & Asymmetric Flow Field)

  • 김주영;김경진;박성하
    • 유체기계공업학회:학술대회논문집
    • /
    • 유체기계공업학회 2002년도 유체기계 연구개발 발표회 논문집
    • /
    • pp.370-377
    • /
    • 2002
  • Generally, the system of calculation for the multi-path ultrasonic flow meters can be divided into two methods by how to get the mean velocity, namely, weighting and direct method. Weighting-method derive the mean velocity through modeling in theoretical velocity profile. Direct-method derive the mean velocity though actual flow distribution. The system of calculation varies with maker's transducer configuration and integration method. Each system has merits and demerits. This paper describes the system of integration that calculates line velocity over cross-section of the circular pipe. Flow rate mr discussed in this paper is a difference between theoretical flow rate and integrated flow rate according to values of Reynolds number in symmetric flow field or theoretical flow rate and integrated flow rate according to rotated model in asymmetric flow field.

  • PDF

Direct Evaluation of the Maximum and Limit States of Inelastic Structures Under Step Loads

  • Lee, Sang-Ho-
    • 한국해안해양공학회:학술대회논문집
    • /
    • 한국해안해양공학회 1992년도 정기학술강연회 발표논문 초록집
    • /
    • pp.146-149
    • /
    • 1992
  • The dynamic inelastic analysis is now often performed for the safe structural design against the seismic events or explosions. Several powerful methods of dynamic inelastic analysis such as direct intergration methods and modal superposition methods were developed with the development of computers during the last three decades. This type of analysis generally adopts the step-by-step time-integration procedure and gives a complete time history of the evolution of the structure.(omitted)

  • PDF

Efficient methods for integrating weight function: a comparative analysis

  • Dubey, Gaurav;Kumar, Shailendra
    • Structural Engineering and Mechanics
    • /
    • 제55권4호
    • /
    • pp.885-900
    • /
    • 2015
  • This paper introduces Romberg-Richardson's method as one of the numerical integration tools for computation of stress intensity factor in a pre-cracked specimen subjected to a complex stress field across the crack faces. Also, the computation of stress intensity factor for various stress fields using existing three methods: average stress over interval method, piecewise linear stress method, piecewise quadratic method are modified by using Richardson extrapolation method. The direct integration method is used as reference for constant and linear stress distribution across the crack faces while Gauss-Chebyshev method is used as reference for nonlinear distribution of stress across the crack faces in order to obtain the stress intensity factor. It is found that modified methods (average stress over intervals-Richardson method, piecewise linear stress-Richardson method, piecewise quadratic-Richardson method) yield more accurate results after a few numbers of iterations than those obtained using these methods in their original form. Romberg-Richardson's method is proven to be more efficient and accurate than Gauss-Chebyshev method for complex stress field.

개선된 콤포넌트 모드법을 이용한 거대구조물의 동적해석 (Dynamic analysis for complex structures using the improved component mode method)

  • 심재수;박명균
    • 한국전산구조공학회:학술대회논문집
    • /
    • 한국전산구조공학회 1993년도 봄 학술발표회논문집
    • /
    • pp.37-44
    • /
    • 1993
  • There are a lot of linear dynamic analysis methods for complex structures. Each method has advantages and shortcomings. Method of dynamic analysis for complex structure is selected considering characteristics of dynamic loading, computer facility available number of degree of freedem and accuracy of results. It is a main point of view to get economical results rather then accurate ones for analysis of general complex structures, Mode superposition method and direct integration method are generally used. However, the characteristics of load is not considered in mode superpositon method, the personal computer cannot be used in direct integration methods. To over-come these shortcomings, the component mode method incorporating Ritz algorithm updated is proposed to solve economically dynamic behavior of the structures. The purpose of study is a formulation of algorithm, and computer programing suitable for dynamic analysis of the complex structure in personal computer environment.

  • PDF