• International Journal of Highway Engineering
• /
• v.17 no.4
• /
• pp.117-126
• /
• 2015

PURPOSES : This study aims to investigate the direct and indirect influence areas from incidents on urban interrupted roadways and to develop traffic management strategies for each influence area. METHODS : Based on a literature review, various traffic management strategies for certain incidents were collected. In addition, the relationship between the measure of effectiveness and the characteristics of incidents was explored using an extensive simulation study. RESULTS : From the simulation studies, traffic delays increased as the number of lane closures increased, and the impact of lane closures was reduced to the direction upstream from the incident site. However, the magnitude of the delay change depended on the degree of saturation. Using these characteristics, the direct and indirect influence areas resulting from incidents were defined, and traffic management strategies were established for each direct and indirect influence area and for each level of incident. CONCLUSIONS: The results of this study will contribute to the improvement of national traffic safety by preventing secondary incidents and by effective adaptation to incident events.

• Journal of Korean Port Research
• /
• v.14 no.3
• /
• pp.341-351
• /
• 2000

This study is on the purpose that the influence caused by noise and shaking through construction works shall be ranged to the fishing species of fishing area of the surface of sea. This study have been performed through analysis of physical effect by the value of noise and shaking test. The resulted purpose of this study has been carried out regarding whether influence factor of the fishing species and others are related or not as per the noise and shaking. For the purpose of the survey of noise and shaking, observances have been performed regarding the direct water surface of fishing area are as well as undersea. As for this result, the influence area for the injury at the fishing area caused by the noise and shaking have been stretched out to the distance of 10km from the source of sound. In this conclusion, this study is regarded as the reference basis of the compensation of injury for the species of fish and others in fishing area.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.37 no.3
• /
• pp.260-269
• /
• 2013

This study verifies the direct and indirect causal relationship of sociocultural values related to appearance effect appearance evaluation, body area satisfaction, appearance orientation, and self-esteem that are variables involved in body images. This paper is expected to empirically support the information regarding the path and the relative influence among related-variables and their relational structures. A survey was conducted on 230 women from the ages of 20 to 29 who live in Daegu and Gyeongbuk areas. The data analysis was performed through programs such as AMOS 19.0 and SPSS 19.0 for Windows. The findings are as follows: First, Sociocultural values relating to appearance affect directly body image - appearance evaluation, body area satisfaction, and appearance orientation. Appearance evaluation and appearance orientation were influenced positively; however, body area satisfaction received egative effects. In addition, sociocultural values related to appearance exert relatively stronger influence on appearance orientation. Second, among body images, appearance evaluation and body area satisfaction directly effect self-esteem; however, appearance orientation did not show any direct influence. Appearance evaluation influenced relatively higher on self-esteem. Third, it appeared that appearance evaluation directly affected Appearance orientation. Forth, sociocultural values related to appearance affect self-esteem through body images-appearance evaluation, body area satisfaction, and appearance orientation - as mediators. This confirmed the mediator role of body image between sociocultural values related to appearance and self-esteem.

• Journal of the Korean housing association
• /
• v.21 no.4
• /
• pp.23-31
• /
• 2010

This study aims to examine the educational function space of university dormitories at local universities with corridor centered structure in Honam area regions based on direct and indirect parameters on the whole satisfaction of users in residential environment factors and personal characteristics. First, according to relations among parameters, educational and cultural activities of four major activities within the dormitory had indirect influences on social activities, eating and sleeping activities had no direct influence on other activities. And social activity had direct influence on the general satisfaction as an important parameter and educational and cultural activities had indirect influence on the whole satisfaction through social activities. Detailed results show that, in the first educational activities directly affecting the lighting and air conditioning facilities (0.22), safety (0.326), Territoriality (0.327), the space density (-0.167), directions (-0.166) and yeohyang having personal characteristics and the safety of the second cultural activities (0.183), Territoriality (0.361), Aesthetics (-0.13) and the personal characteristics Sex (-0.179), the direct effect, third, and erosion has a direct impact on activity The flexibility of the space factor (-0.128) and Territoriality (0.38) and the personal characteristics grade (0.172), respectively. Fourth in social activities directly affecting the pathfinding (-0.104), and parameter, education (0.388) and cultural activities (0.445), and some of the factors affecting the indirect lighting and air conditioning facilities, safety, and Territoriality, the space density, directions, grade, they could influence through educational activities to be analyzed. That is, territoriality in educational function space is the important factor that users react very sensitively in educational, eating and sleeping activities and educational function space must secure area and division considering personal and public use as the space accommodating activity which is lacking in unit residential space. Accordingly, the safety of educational function space in university dormitory is considered as the fundamental safety matter on the fire prevention, hygiene and cleanness for users in the satisfaction of educational and cultural activities.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.25 no.3
• /
• pp.380-391
• /
• 2015

Objectives: The objective of this study is to assess airborne particulate matter pollution and its effect on health of residents living near Ansim Briquette Fuel Complex and its vicinities. Also, this study measured and analyzed the concentration of TSP, $PM_{10}$, $PM_{2.5}$, and heavy metals which influences on the environmental and respiratory disease in Ansim Briquette Fuel Complex, Daegu, Korea. Methods: In this study, we analyzed various environmental pollutants such as particulate matter and heavy metals from Ansim Briquette Fuel Complex that adversely affected local residents's health. In particular, we verified the concentration distribution and characteristics of exposure for TSP, $PM_{10}$, and $PM_{2.5}$ among particulate matters, and heavy metals(Cd, Cr, Cu, Mn, Ni, Pb, Fe, Zn, and Mg). In that regard, the official test method on air pollution in Korea for analysis of particulate matter and heavy metal in atmosphere were conducted. The large capacity air sampling method by the official test method on air pollution in Korea were applied for sampling of heavy metals in atmosphere. In addition, we evaluated the concentration of seasonal environmental pollutants for each point of residence in Ansim Briquette Fuel Complex and surrounding area. The sampling measured periods for air pollutants were from August 11, 2013 to February 21, 2014. Furthermore, we measured and analyzed the seasonal concentrations(summer, autumn and winter). Results: The average concentration for TSP, $PM_{10}$, and $PM_{2.5}$ by direct influence area at Ansim Briquette Fuel Complex were 1.7, 1.4 and 1.9 times higher than reference region. In analysis results of seasonal concentrations for particulate matter in four direct influence and reference area, concentration levels for winter were generally somewhat higher than concentrations for summer and autumn. The average concentrations for Cd, Cr, Mn, Ni, Pb, Fe, and Zn in direct influence area at Ansim Briquette Fuel Complex were $0.0008{\pm}0.0004{\mu}g/Sm^3$, $0.0141{\pm}0.0163{\mu}g/Sm^3$, $0.0248{\pm}0.0059{\mu}g/Sm^3$, $0.0026{\pm}0.0011{\mu}g/Sm^3$, $0.0272{\pm}0.0084{\mu}g/Sm^3$, $0.4855{\pm}0.1862{\mu}g/Sm^3$, and $0.3068{\pm}0.0631{\mu}g/Sm^3$, respectively. In particularly, the average concentrations for Cd, Cr, Mn, Ni, Pb, Fe, and Zn in direct influence area at Ansim Briquette Fuel Complex were 1.9, 3.6, 2.1, 1.9, 1.4, 2.6, and 1.2 times higher than reference area, respectively. The continuous monitoring and management were required for some heavy metals such as Cr and Ni. Moreover, the average concentration in winter for particulate matter in direct influence area at Ansim Briquette Fuel Complex were generally higher than concentrations in summer and autumn. Also, average concentrations for TSP, $PM_{10}$, and $PM_{2.5}$ were from 1.5 to 2.0 times, 1.2 to 1.8 times, and 1.1 to 2.3 times higher than reference area, respectively. In results for seasonal atmospheric environment, TSP, $PM_{10}$, $PM_{2.5}$, and heavy metal concentrations in direct influence area were higher than reference area. Especially, the concentrations in C station were a high level in comparison with other area. Conclusions: In the results, some particulate matters and heavy metals were relatively high concentration, in order to understand the environmental pollution level and health effect in surrounding area at Ansim Briquette Fuel Complex. The concentration of some heavy metals emitted from direct influence area at Ansim Briquette Fuel Complex were relatively higher than reference area. In particular, average concentration for heavy metals in this study were higher than average concentrations in air quality monitoring station for heavy metal for 7 years in Deagu metropolitan region. Especially, the residents near Ansim Briquette Fuel Complex may be exposed to the pollutants(TSP, $PM_{10}$, $PM_{2.5}$, and heavy metals, etc) emitted from the factories in Ansim Briquette Fuel Complex.

• Journal of Ocean Engineering and Technology
• /
• v.27 no.5
• /
• pp.88-92
• /
• 2013

The icebreaking research vessel (IBRV) ARAON had her second ice trial in the Arctic Ocean in the summer season of 2010. During the voyage, the local ice loads acting on the bow of the port side were measured using 14 strain gauges. These measurements were carried out in three icebreaking performance tests. To convert the measured strains into the local ice pressures, a finite element model of the instrumented area was developed. The influence coefficient method (ICM), which uses the influence coefficient from the finite element model, and the direct method, which uses the measured strain, were selected as the conversion methods. As a result, the maximum measured pressure was 1.236MPa, and the average difference between ICM and the direct method was about 5% for an area of $0.2m^2$. The pressure-area relationship of the measurement falls below the range of the existing pressure-area curve, which is due to the low ice strength of melted ice in the summer.

• Journal of the Korean housing association
• /
• v.21 no.3
• /
• pp.87-94
• /
• 2010

The aim of this study was to evaluate the influence of air pollution level in industrial and residential district of Ulsan on resident's evaluation and cognition for indoor environment. The evaluation of air pollution materials (as $SO_2$, $NO_2$, $O_3$, CO, PM10) were investigated to understand the distributional characteristics in survey area, and air quality monitoring data from 2007 to 2009 were used. The data was applied in a realtime measurement of industrial and residential area respected to difference of the pollution level in Ulsan. The questionnaire of this survey for resident's cognition was to find out characteristics on perception of indoor environment and outdoor air quality recognition based on the distinct characteristics of the areas. The results of this study shows that resident's satisfaction at clean level outdoor air and indoor environment were different whether it was residential area or industrial area and outdoor air pollution level has direct influence on resident's satisfaction in indoor environment.

• Human Ecology Research
• /
• v.53 no.5
• /
• pp.531-542
• /
• 2015

This study examined the structural relationships among 4- and 5-year-old children's playfulness, communication skills, and creative characteristics. This research analyzed the direct and indirect influence of child's playfulness on communication skills and creative characteristics. The study subjects were 249 children who attend kindergartens located in the Seoul and Gyeonggi-do area. A survey questionnaire was distributed to the children's mothers and teachers. The sample was analyzed using SPSS 21.0 and AMOS 21.0 program. The parameters were estimated by maximum likelihood method. The significance of indirect effect was tested by bootstrapping at .05 level. The results of this study were: (1) in both ages 4 and 5, playfulness had a direct and positive influence on communication skills, (2) in both ages, communication skills had a direct and positive effect on creative characteristics, and (3) the 5-year-old children's playfulness had a direct effect on creative characteristics, the 4-year-old children's playfulness did not exert direct influence onto creative characteristics. Communication skills 5-year-old children were seen to precipitate a partial mediation effect between playfulness and creative characteristics. At age 4, communication skills played a full mediation variable role between playfulness and creative characteristics. Discussions include suggestions to prosper creative characteristics through enhancing a child's playfulness and communication skills.

• Asia-Pacific Journal of Business
• /
• v.14 no.4
• /
• pp.129-150
• /
• 2023

Purpose - This study is based on the Theory of Planned Behavior and aims to explore the decision-making mechanisms of consumers participating in value co-creation activities within virtual brand communities. Methodology - The research involved a comprehensive survey of 405 participants from various virtual brand communities. Structural Equation Modeling (SEM) was used for data analysis, applying SPSS and AMOS to test the hypotheses. The study focused on community rules and regulations, community experience and community trust. Results - The research found that community rules and regulations significantly impact subjective norms and perceived behavioral control, but not directly influence consumer attitudes. Community experience positively affected consumer attitudes, subjective norms and perceived behavioral control. Community trust was found to positively influence these aspects of consumer decision-making. However, a gap was identified in the direct influence of perceived behavioral control on actual consumer behavior. Implications - The findings of this study contribute to a more comprehensive understanding of factors affecting consumer behavior in virtual brand communities. It underscores the necessity for community managers to develop strategies that consider these internal decision-making mechanisms, facilitating more effective community engagement. The study also identifies a potential area for future research in the direct influence of perceived behavioral control on actual consumer behavior.

• Environmental Engineering Research
• /
• v.24 no.2
• /
• pp.347-353
• /
• 2019

Although membrane distillation (MD) has great promise for desalination of saline water sources, it is crucial to improve its thermal efficiency to reduce the operating cost. Accordingly, this study intended to examine the thermal energy efficiency of MD modules in a pilot scale system. Two different modules of hollow fiber membranes were compared in direct contact MD mode. One of them was made of polypropylene with the effective membrane area of $2.6m^2$ and the other was made of polyvinylidene fluoride with the effective membrane area of $7.6m^2$. The influence of operation parameters, including the temperatures of feed and distillate, feed flow rate, and distillate flow rate on the flux, recovery, and performance ratio (PR), was investigated. Results showed that the two MD membranes showed different flux and PR values even under similar conditions. Moreover, both flow rate and temperature difference between feed and distillate significantly affect the PR values. These results suggest that the operating conditions for MD should be determined by considering the module properties.