• 대한화학회지
• /
• 제45권5호
• /
• pp.481-490
• /
• 2001

이 연구의 목적은 제 6차 교육과정에 의한 중학교 1학년 과학 교과서 분별 증류 실험의 문제점을 파악하고, 중학생들이 분별 증류 실험을 능률적으로 수행할 수 있는 실험 방법을 제시하고자 하는 것이다. 이를 위한 첫 번째 단계로서 현재 사용되고 있는 8종의 과학 교과서를 분별 증류 실험 장치와 액체 혼합물의 종류에 따라 6가지로 분류하였다. 두 번째 단계로서 액체 혼합물을 가열 방법에 따라 직접 가열과 물 중탕 가열로 나누어 교과서 실험과정에 따라 같은 실험을 세 번 실시하였다. 세 번재 단계로서 실험 결과의 문제점을 해결하기 위한 대안 실험을 실시하였다. 대안 실험에서는 알코올 램프로 직접가열 하는 방법과 기름 중탕으로 가열하는 방법, 그리고 가열 맨틀을 사용하여 가열하는 방법을 사용하였다. 연구결과, 가지달린 둥근 플라스크를 직접 가열하는 실험 결과가 가지 달린 시험관을 물 중탕으로 가열하는 실험 결과보다 이론적인 결과에 근접하였다. 그리고 가지 달린 둥근 플라스크를 직접 가열하는 실험에서 플라스크 윗 부분을 보온해 주는 실험이 보온하지 않은 실험보다 실험 결과가 더 나았다. 대안 실험에서는 액체 혼합물의 증류 온도 증가를 보면서 가열 맨틀의 가열 온도를 올려 준 실험의 결과가 이론적인 결과에 가장 가까웠다. 이러한 연구 결과로부터 가지 달린 시험관을 물 중탕으로 가열하는 분별 증류 실험장치는 탐구실험 수업에 부적절한 것이므로 개선이 요구되며, 중학교 과학실 여건을 고려할 때, 액체 혼합물의 증류 온도 증가를 보면서 가열 맨틀의 가열 온도를 변화시키는 분별 증류 실험이 가장 능률적인 방법임을 알 수 있었다.

• 산업기술연구
• /
• 제25권B호
• /
• pp.121-126
• /
• 2005

Micro wires manufactured by the straightening process are used in the BT(Bio-Technology), IT(Information-Technology), NT(Nano-Technology). We have developed a novel wire straightener which uses the direct heating method(DHM) for straightening the micro wire and shearing device for burr-less cutting. In this study, we confirm the tendency of micro wire after the shearing process. It is impossible to remove the burr in the shearing process. However, the embodiment of minimum burr size after the shearing process is the best in-process method. In order to minimize the burr size, we have accomplished the various experiment condition such as the U-groove, the effect of the counter punch, the shear angle, clearance.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 금형가공,미세가공,플라스틱가공 공동 심포지엄
• /
• pp.175-180
• /
• 2005

In this study, we have developed a novel wire straightener which uses the direct heating method (DHM) fer straightening the micro wire. Also, we have developed a shearing device for cutting the micro wire. In order to avoid the surface oxidization, we supplied the inert gas(Ar) during the heating process and examined the effect of gas flow rate. The effects of the tension and the current applied to the tungsten micro wires were also thoroughly studied. From various experiments and analyses, we could obtain fine straightness $(\approx1\;{\mu}m/1000\;{\mu}m)$ and roundness $(<{\pm}2{\mu}m\;/100{\mu}m)$ when the tension is $500\~~600gf$ and the current is about 1.5A. for burrfree cutting, counter-punch method which two cutters moving contrary was used. The cutting blade has various U-groove angle where upper $10^{\circ}$, $mid:25^{\circ}$, lower $0^{\circ}$. After the shearing process, we confirmed the shearing section.

• 산업기술연구
• /
• 제24권A호
• /
• pp.17-22
• /
• 2004

In the study, we have developed a straightening system for 304 micro wires that are normally used in the medical and semi-conductor fields. To apply heat to the micro wires, we introduced the direct wire heating method which generates the thermal energy by the electrical resistance of the wire itself. To avoid the deterioration of the wire surface by the environment, such as the oxidation or the hydration, the $N_2$ gas was filled in the glass pipe in which the straightening process was being performed. A precision tension meter was also attached to control the tension of the wire during the heating and straightening process. In order to control the straightening process, several experimental investigations with varying the tension, the feeding velocity and the temperature (current) was carried out. As a result of experiments, we obtained the optimal processing conditions satisfying the straightness requirement of the micro wires.

• Journal of Welding and Joining
• /
• 제25권4호
• /
• pp.28-34
• /
• 2007

The heating unit of direct heating method manufactured as the plasma spray coating of $TiO_2/NiCr$ conductive heating material on the surface of heating unit in order to improve the disadvantages of indirect heating method. $TiO_2$ and NiCr (80wt.%Ni-20wt.%Cr) that had the properties of conduction and heating was chosen for the conductive heating material. The compositions of the composite powders were studied $TiO_2-30wt.%NiCr\;and\;TiO_2-10wt.%NiCr$. As the heating temperature was increased, the hardness of heating layer was increased because of the fine microstructure and the decrease of porosity. The adhesion strength was decreased for coarsening and connection of voids in the insulation layer, and the electrical resistivity of heating layer was increased for fine crack formation and growth. In this study, the best efficient sprayed coatings with heating unit was concluded as the plasma sprayed $TiO_2-10wt.%NiCr$ coatings that was heat treated at $300^{\circ}C$.

• 대한공업교육학회지
• /
• 제32권2호
• /
• pp.188-198
• /
• 2007

이 연구의 목적은 열처리 방법으로 탄소나노튜브에 백금나노 입자를 담지하는 것이다. 이 목적을 달성하기 위해서 염화백금산 수용액으로부터 hexachloro platinate(IV)를 탄소나노튜브에 흡착시킨 후 환원제를 사용하지 않고 질소분위기에서 $400^{\circ}C$로 열처리 하여 백금 나노입자를 담지 시켰다. 탄소나노튜브에 흡착된 hexachloro platinate(IV)의 함량은 UV-visible spectrophotometer를 사용하여 정량하였고, 탄소나노튜브에 담지된 백금 나노입자 존재와 분산을 확인하기 위해서 열중량분석, X-ray 회절분석, 투과전자현미경 관찰을 수행하였다. hexachloro platinate(IV)를 흡착시킨 탄소나노튜브를 환원제를 사용하지 않고 질소분위기에서 $400^{\circ}C$에서 열처리하면 2 nm 이하의 백금 나노입자가 균일하게 분포되었다. 한편, $800^{\circ}C$에서 열처리한 경우에는 백금입자들이 상호 응집현상이 발생하여 백금 입자의 크기가 커지고 분산이 균일하지 못했다. 따라서 hexachloro platinate(IV)를 탄소나노튜브에 흡착시킨 후 질소분위기에서 $400^{\circ}C$의 간단한 열처리를 통해서 백금 나노입자를 담지시킬 수 있었다.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제49권5호
• /
• pp.327-337
• /
• 2000

In this paper, the design sensitivity formula for the control of the transient temperature distribution is developed using the direct differentiation method, and used for the optimal design of induction heating coil position. The temperature distribution is calculated using the heat source of the induced eddy current and heat diffusion equation. The physical property variations of the workpiece depending on the temperature are considered. The eddy current distribution and the temperature distribution are calculated with the 2D finite element procedure. The adjoint variable technique is employed in expressing the design sensitivity. The goal of the design is to have the desired distribution of the temperature on a specific region of the sensitivity. The goal of the design is to have the desired distribution of the temperature on a specific region sensitivity. The goal of the design is to have the desired distribution of the temperature on a specific region of the workpiece. The numerical example shows that the proposed design sensitivity analysis for the control of the transient temperature distribution is very useful and practical in the optimal design of induction heating coils.

• 한국의류산업학회지
• /
• 제8권4호
• /
• pp.441-448
• /
• 2006

This research is the hair damage as treating a permanent wave before and after that is compared and analyzed the change of physical and mechanical properties. This is the survey of women's hair in 20 years old. On the basis of this we would like to analyze a extend of hair damage. Also, we would to show a basic data for hair damage prevention and hair improvement to keep the beautiful and healthy hair. The conclusion is as follow. : The swelling degree after the treatment was found to be greater than before permanent wave treatment. For the formational characteristics wave, untreated hair certainly had more elastic S curl wave than damaged hair in all the permanent wave treatments, and damaged hair and extremely damaged hair had less elasticity and had saggy S curl wave. The protein permanent and soft permanent wave had thicker, gorgeous, and better elastic wave than the regular permanent wave and direct heating permanent wave in all the hair condition. As the degree of damage on hair got greater, the tensile strength dramatically decreased and as the degree of damage got greater, the elongation was great as well. For treatment method, direct heating permanent wave showed the greatest effect, causing the most damage.

• Environmental Analysis Health and Toxicology
• /
• 제29권
• /
• pp.7.1-7.8
• /
• 2014

Objectives The present study was designed to systematically characterize the denaturation and the renaturation of double stranded DNA (dsDNA), which is suitable for DNA hybridization. Methods A series of physical and chemical denaturation methods were implemented on well-defined 86-bp dsDNA fragment. The degree of each denaturation was measured and the most suitable denaturation method was determined. DNA renaturation tendency was also investigated for the suggested denaturation method. Results Heating, beads mill, and sonication bath did not show any denaturation for 30 minutes. However probe sonication fully denatured DNA in 5 minutes. 1 mol/L sodium hydroxide (alkaline treatment) and 60% dimethyl sulfoxide (DMSO) treatment fully denatured DNA in 2-5 minutes. Conclusions Among all the physical methods applied, the direct probe sonication was the most effective way to denature the DNA fragments. Among chemical methods, 60% DMSO was the most adequate denaturation method since it does not cause full renaturation during DNA hybridization.

• 한국산학기술학회논문지
• /
• 제20권3호
• /
• pp.476-482
• /
• 2019

본 기후변화협약, 온실가스배출규제와 같은 규제적 규약들은 고효율 에너지 기자재 개발과 에너지의 효율적 이용을 촉진하는 촉매로 작용하고 있다. 에너지소비가 큰 분야 중 전열기기가 효율이 좋지 못한 편이다. 전기보일러는 히터에 물을 접촉시켜 순환시키는 방식을 주로 사용하고 있다. 기존 전기보일러를 활용할 경우 물의 미네랄이 고온의 히터와 접촉하여 탄화되어 흡착되는 과정에서 히터의 부식을 촉진시키고 히터의 효율을 저하시킨다. 이러한 이유로 에너지 효율이 높고, 전도나 대류가열보다 피가열물을 균일하게 가열시킬 수 있는 유도가열방식을 보일러에 적용시킨 전기유도보일러가 각광을 받고 있는데, 이 방식은 물이 담겨 있는 보일러 관로를 유도가열방식으로 가열하여 직접가열시 발생하는 문제를 해결시킬 수 있는 대안으로 인정받고 있다. 비교적 오랜 기간 유도가열에 대한 연구가 이루어졌음에도 불구하고 유도가열을 이용한 전열기술에 대한 연구결과는 그리 많지 않은 실정이다. 따라서 본 논문에서는 전기유도보일러의 발열효율을 개선하기 위하여 매개변수연구방법을 통하여 권선의 단면적, 권선의 수 및 권선의 겹수에 의한 영향을 유한요소법을 이용하여 해석하고 발열의 요소가 되고 있는 동손과 철손을 분석하여 발열을 극대화시킬 수 있는 권선설계방법으로 총손실이 최대가 되는 설계점을 찾는 방법을 제시하였다.