• 현장농수산연구지
• /
• 제3권1호
• /
• pp.30-47
• /
• 2001

This research was performed to develope a stable direct seeding method in rice cultivation using by a direct seeder with soil application. A principle of this methodology was introduced from seeding nursery system of machine transplanting enable to increase high seeding establishment direct seeding method with soil application was high of 89-95% while that of water seeding was 68%. During seeding growth plant height was ralatively small but seeding health was high. A total soil consumption of this methodology was 145kg/10a in dirll seeding and 26kg/10a in hill seeding respectively, there was 100% erected in direct seeding with soil application while water seeding was 45% in erected seeding stand. In direct seeding method with soil application total carbohydrate content was higher than that of water seeding. This machine was manufactured to attach and/or detach to a machine transplanter with riding type and machine cultivator with multipurpose. In the farmer's demonstrated rice field this method was well performed like machine transplanting in terms of rice growth and development. There was highly cost reduction for rice production like other direct seeding methods.

• 한국레이저가공학회지
• /
• 제8권1호
• /
• pp.9-18
• /
• 2005

The laser direct writing method using a UV Argon-ion laser is studied for fabrication of waveguide. The laser direct writing system is constructed with a vision camera, a xy-stage, a motion controller and the delivery components of a laser beam. The UV Argon-ion laser has wavelength range of $333.6\~363.8$ nm. A photo-active UV curable polymer for a planar light-wave circuit(PLC) of single mode is used. This polymer is irradiated by Argon-ion laser and developed by a solvent after a post-baking. The optimum laser direct writing condition is obtained experimentally by changing various process parameters such as laser power, writing speed and focal length. The propagation and coupling loss of a optical waveguide was measured as 1dB/cm and 0.6dB/cm, respectively. Also, the minimum width of waveguide of $100{\mu}m$(ZPLW-207) is obtained. Finally, the waveguides of line, bend and branch type are successfully fabricated.

• 한국재료학회지
• /
• 제29권12호
• /
• pp.818-824
• /
• 2019

In this study, the direct water quenching technique is applied to validate the applicability of direct water quenching as a cooling method in the hot stamping process of 3.2 mm thick boron steel sheet. Cooling performance of conventional die quenching and direct water quenching is compared. Higher cooling rate is obtained by hot stamping with direct water quenching compared to die quenching. As the flow rate of cooling water increases, the cooling rate increases, and a high cooling rate of 71 ℃/s is achieved under flow rate conditions of 0.8 L/min. Through direct water quenching, the cooling time required for sufficient cooling of the sheet is reduced. Full martensitic microstructure is obtained under flow rate condition of 0.8 L/min. Hardness increases with increasing flow rate. From these results, it is verified that the direct water quenching is applicable to the hot stamping of thick boron steel sheet.

• 한국인터넷방송통신학회논문지
• /
• 제14권3호
• /
• pp.13-19
• /
• 2014

노트북, 태블릿, 스마트폰 등 모바일 기기들의 성능 향상으로 인하여 임의의 장소에서의 그룹 회의를 진행하는 사람들이 많아지고 있다. 그러나 회의 참석자들이 근거리에 위치하고 있음에도 불구하고 참석자들 간의 데이터의 교환은 셀룰러 망을 이용하여 이루어지고 있다. 이는 불필요하게 셀룰러망에 부하를 가중시키는 원인이 되어 데이터의 송수신 지연을 발생시키고 원활한 회의의 운영 및 일반 모빌 통신 사업자의 통화 품질을 저하시키는 원인이 된다. 이러한 문제를 해결하기 위하여 본 논문에서는 Wi-Fi Direct 기술을 이용하여 근거리 통신기기들 간의 셀룰러 망을 사용하지 않고 회의 참석자들간 직접 통신을 수행할 수 있는 안드로이드 어플리케이션을 개발하고 그 방법에 대하여 소개한다.

• Transactions on Electrical and Electronic Materials
• /
• 제9권1호
• /
• pp.16-19
• /
• 2008

In this study, it was investigated about optical simulation in direct-type backlight design. Direct-type backlight has been used high-brightness backlight such as medical LCD application. The key parameter in designing direct-type backlight was consists of three geometrical dimension such as the distance of two lamps, the gap of lamp and reflection plate and the number of lamps. It has many of variations in optical design and it causes the different properties in backlight system. It shows the best values of above parameters; 26 mm of the distance of two lamps, 4.5 mm of the gap of lamp and reflection plate and 16 lamps. And we produced the specimen as above condition, and acquired good result in backlight such as the value of the brightness is 6423 nit in center of emission area and less than 5 % in brightness uniformity. It shows the effective ways of designing backlight system using optical simulation method for medical LCD application.

• 한국정보과학회논문지:컴퓨팅의 실제 및 레터
• /
• 제10권1호
• /
• pp.114-124
• /
• 2004

본 논문에서는 DirectShow 프로그래밍의 주요 개발 도구인 그래프 에디터에서 작성된 필터 연결 그래프로부터 C 소스 코드를 자동 생성하는 시스템에 대한 설명한다. 기존의 DirectShow 프로그래밍 환경에서는 그래프 에디터를 이용한 프로그램 설계 및 실행 확인 작업과 실제 프로그램 코드를 작성하는 프로그램 개발 작업이 별도로 이루어진다. 이에 반해, 본 시스템을 사용할 경우, 멀티미디어 응용 프로그램 개발자는 소스 코드를 직접 일일이 수정할 필요 없이, 그래프 에디터를 이용하여 필터 삽입 및 필터 연결을 통한 프로그램 설계 작업을 수행한 다음, GRF 파일로 저장하기만 하면, 원하는 C 소스 프로그램을 자동적으로 얻을 수 있기 때문에 보다 효과적이고 훨씬 신속한 DirectShow 프로그래밍이 가능하다. 더욱이 본 시스템은, 고정된 개수의 매우 제한된 미디어 제어 기능만을 소스 코드에 추가할 수 있는 기존의 시스템과는 달리, 시스템 사용자인 프로그램 개발자로 하여금 자신이 개발하고자 하는 응용 프로그램에 추가할 미디어 제어 기능을 보다 쉽고 다양하게 선택할 수 있도록 지원하기 때문에 보다 실용적인 도구로 활용될 수 있다.

• 한국강구조학회 논문집
• /
• 제22권4호
• /
• pp.293-303
• /
• 2010

본 연구는 강구조 설계기준(KBC 2009)에서 골조 안정성 평가를 위해 제시한 하중증폭계수를 적용한 직접해석법의 적용 방법에 따른 영향을 해석적 방법을 통해 평가하는데 목적이 있다. 이를 위해 KBC 2009에서 제안하고 있는 가상수평하중 적용 방법, 휨강성 감소 방법, B2 계수 산정 방법 등을 각각 적용한 직접해석을 3층 1스팬 및 5층 3스팬 비가새 강구조 골조에 대해 실시하고, 그 해석 결과를 2차 비탄성 해석 결과와 비교하여 각 적용 방법의 영향을 평가하였다. 직접해석법 적용 방법 이외에 외적 요인의 영향을 고찰하기 위해 골조의 규모, 기둥의 축력비, 축력의 층별분포 등도 변수로 추가하였다. 연구 결과 소요압축강도는 직접해석법 적용 방법에 따른 차이가 크지 않은 것으로 나타났으며, 소요휨강도는 가상수평하중 누계 및 추가 적용, 층강성 개념 B2 계수를 직접해석법에 적용시 적절한 결과를 나타내었다.

• Journal of Electrical Engineering and Technology
• /
• 제12권3호
• /
• pp.1124-1136
• /
• 2017

Direct Power Control technique has become popular in the grid connected Voltage Source Converter (VSC) applications due to its simplicity, direct voltage vector selection and improved dynamic performance. In this paper, a direct method to determine the effect of voltage vector on the instantaneous active and reactive power variations is developed. An alternative Look Up Table is proposed which minimizes the commutations in the converter and results in minimum reactive power variation. The application of suggested table is established for Shunt Active Power Filter (SAPF) application. The Predictive Direct Power Control method, which minimizes apparent power variation, is further investigated to reduce commutations in converters. Both the methods are validated using 2 kVA laboratory prototype of Shunt Active Power Filters (SAPF).

• 간호행정학회지
• /
• 제19권2호
• /
• pp.217-226
• /
• 2013

Purpose: Purpose of this research was to identify effects of application of a modified primary nursing system. Methods: Measurement was done of direct nursing time and satisfaction of nurses and patients before and after one month of the modified primary nursing system in a surgery unit in C university hospital, Seoul. Results: There was no statistically significant difference between average for patient satisfaction (4.24) before and (4.11) after application of the modified primary nursing system. Total average for nurse satisfaction with the nursing delivery system was 2.89 before application and, 3.34 after, indicating some significant differences (t=-4.06, p<.001). The KPCS-1 was 10.19 before application of the modified primary nursing system and 9.52 after application. Recalculated into direct nursing time, the average direct nursing time for one patient was 92 minutes before application, and 85.98 minutes after, indicating no significant difference. Conclusion: Through this research an attempt was made to build and test a modified primary nursing system. Results indicate that the most important thing is to clearly regulate office work and safely implement the new system.

• 한국작물학회지
• /
• 제43권1호
• /
• pp.49-53
• /
• 1998

Direct-seeding has major advantages such as labor and cost saving by eliminating preparation of seed bed and transplanting. But, it required increased input of fertilizers and pesticides because of the extended paddy period. Direct seeding in wet paddy (DSWP) gives faster growth and more uniform seedling emergence than direct-seeding in dry paddy. This research had an objective to develop an efficient N management practices for DSWP with split application of N fertilizer. A paddy field experiment was conducted to evaluate effects of starter N and N-topdressing which was delayed N application until 5-leaf stage, with comparison to transplanting (TP). Total amount of N application were two levels; 110kg and 77kg/ha. The N applications were split four times during rice growth stages; starter, topdressing at 5-leaf stage, top dressing at tillering stage, and topdressing at panicle initiation stage. DSWP had more tillers/$m^2$ than TP, but with the delayed heading. The DSWP plots which received N-topdressing at 5-leaf stage without starter N had higher leaf area index (LAI) and leaf greenness than the TP plot. Also, these DSWP plots had high leaf-N concentration at the heading stage, as calculated from leaf chlorophyll meter readings. Rice yield in DSWP with N-topdressing at 5-leaf stage was significantly higher than that in TP and in DSWP with starter N. Energy and N use efficiency were improved in DSWP with N-topdressing at 5-leaf stage. But, there were no significant differences in grain yield between the two levels of total amounts of N applications, 77kg and 110kg/ha. We concluded that starter N could not be used effectively by rice seedlings, but topdressing N at 5-leaf stage was an efficient N management for rice growth and yield in DSWP system.