• Journal of Practical Agriculture & Fisheries Research
• /
• v.3 no.1
• /
• pp.30-47
• /
• 2001

This research was performed to develope a stable direct seeding method in rice cultivation using by a direct seeder with soil application. A principle of this methodology was introduced from seeding nursery system of machine transplanting enable to increase high seeding establishment direct seeding method with soil application was high of 89-95% while that of water seeding was 68%. During seeding growth plant height was ralatively small but seeding health was high. A total soil consumption of this methodology was 145kg/10a in dirll seeding and 26kg/10a in hill seeding respectively, there was 100% erected in direct seeding with soil application while water seeding was 45% in erected seeding stand. In direct seeding method with soil application total carbohydrate content was higher than that of water seeding. This machine was manufactured to attach and/or detach to a machine transplanter with riding type and machine cultivator with multipurpose. In the farmer's demonstrated rice field this method was well performed like machine transplanting in terms of rice growth and development. There was highly cost reduction for rice production like other direct seeding methods.

• Laser Solutions
• /
• v.8 no.1
• /
• pp.9-18
• /
• 2005

The laser direct writing method using a UV Argon-ion laser is studied for fabrication of waveguide. The laser direct writing system is constructed with a vision camera, a xy-stage, a motion controller and the delivery components of a laser beam. The UV Argon-ion laser has wavelength range of $333.6\~363.8$ nm. A photo-active UV curable polymer for a planar light-wave circuit(PLC) of single mode is used. This polymer is irradiated by Argon-ion laser and developed by a solvent after a post-baking. The optimum laser direct writing condition is obtained experimentally by changing various process parameters such as laser power, writing speed and focal length. The propagation and coupling loss of a optical waveguide was measured as 1dB/cm and 0.6dB/cm, respectively. Also, the minimum width of waveguide of $100{\mu}m$(ZPLW-207) is obtained. Finally, the waveguides of line, bend and branch type are successfully fabricated.

• Korean Journal of Materials Research
• /
• v.29 no.12
• /
• pp.818-824
• /
• 2019

In this study, the direct water quenching technique is applied to validate the applicability of direct water quenching as a cooling method in the hot stamping process of 3.2 mm thick boron steel sheet. Cooling performance of conventional die quenching and direct water quenching is compared. Higher cooling rate is obtained by hot stamping with direct water quenching compared to die quenching. As the flow rate of cooling water increases, the cooling rate increases, and a high cooling rate of 71 ℃/s is achieved under flow rate conditions of 0.8 L/min. Through direct water quenching, the cooling time required for sufficient cooling of the sheet is reduced. Full martensitic microstructure is obtained under flow rate condition of 0.8 L/min. Hardness increases with increasing flow rate. From these results, it is verified that the direct water quenching is applicable to the hot stamping of thick boron steel sheet.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.3
• /
• pp.13-19
• /
• 2014

Improvement of performances of potable communication devices such as laptops, tablets, and smart-phones enables people to do group meetings in any place. However, even though group members in a meeting locate close, data or information to be shared in the group are exchanged through the cellular networks. This increases unnecessary traffic loads in the wireless/backbone networks and as consequence it increase delays in communications. To resolve the problem, an android-based application is developed in this paper. The application utilizes Wi-Fi Direct so that all members in the meeting can direct exchange materials for the meeting without using cellular networks.

• Transactions on Electrical and Electronic Materials
• /
• v.9 no.1
• /
• pp.16-19
• /
• 2008

In this study, it was investigated about optical simulation in direct-type backlight design. Direct-type backlight has been used high-brightness backlight such as medical LCD application. The key parameter in designing direct-type backlight was consists of three geometrical dimension such as the distance of two lamps, the gap of lamp and reflection plate and the number of lamps. It has many of variations in optical design and it causes the different properties in backlight system. It shows the best values of above parameters; 26 mm of the distance of two lamps, 4.5 mm of the gap of lamp and reflection plate and 16 lamps. And we produced the specimen as above condition, and acquired good result in backlight such as the value of the brightness is 6423 nit in center of emission area and less than 5 % in brightness uniformity. It shows the effective ways of designing backlight system using optical simulation method for medical LCD application.

• Journal of KIISE:Computing Practices and Letters
• /
• v.10 no.1
• /
• pp.114-124
• /
• 2004

In this paper, we present an automatic C source code generation system for DirectShow based multimedia application programming. In this system, C source code is automatically synthesized from the filter connection graph edited with GraphEdit, a utility tool provided with DirectShow SDK package from Microsoft. In traditional DirectShow programming environments, program design and brief testing steps are usually done with GraphEdit tool just by inserting filters and connecting them properly, while actual implementation of the program should be done separately. The filter connection graph information from GraphEdit is used just as a reference in such the implementation step. Therefore, our system which automatically generates C source code directly from the filter connection graph of GraphEdit seems very useful and many programmers can develop DirectShow based multimedia application programs more effectively and quickly using our system. In addition, our system supports more various media stream control functions for the generated application programs than the existing system such as Wizard which supports limited and fixed number of media control functions only. This feature allows more flexibility in the user interface of the generated source program and makes our system more practical for DirectShow based programming.

• Journal of Korean Society of Steel Construction
• /
• v.22 no.4
• /
• pp.293-303
• /
• 2010

The purpose of this study was to evaluate the influence of the methods of application of the direct analysis method, using the load amplification factor suggested by the KBC 2009 design code, for the evaluation of frame stability. For this purpose, the direct analysis method was performed for three-story-one-bay and five-story-three-bay unbraced steel frames with various notional loads, bending stiffness reductions, and factor B2s. The results of the analyses were compared with the results of the second-order inelastic analysis to evaluate the influence of the applied methods. The scale of the frame, the axial load ratio, and the axial load distribution pattern were added to the main parameters to investigate the external effects. The research results showed that the influence of the methods of application of the direct analysis method is not significant in the case of the required axial strength and the application of the additional notional loads; and that the application of the factor B2 with the story stiffness concept to the direct analysis method is appropriate for the required flexural strength.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.3
• /
• pp.1124-1136
• /
• 2017

Direct Power Control technique has become popular in the grid connected Voltage Source Converter (VSC) applications due to its simplicity, direct voltage vector selection and improved dynamic performance. In this paper, a direct method to determine the effect of voltage vector on the instantaneous active and reactive power variations is developed. An alternative Look Up Table is proposed which minimizes the commutations in the converter and results in minimum reactive power variation. The application of suggested table is established for Shunt Active Power Filter (SAPF) application. The Predictive Direct Power Control method, which minimizes apparent power variation, is further investigated to reduce commutations in converters. Both the methods are validated using 2 kVA laboratory prototype of Shunt Active Power Filters (SAPF).

• Journal of Korean Academy of Nursing Administration
• /
• v.19 no.2
• /
• pp.217-226
• /
• 2013

Purpose: Purpose of this research was to identify effects of application of a modified primary nursing system. Methods: Measurement was done of direct nursing time and satisfaction of nurses and patients before and after one month of the modified primary nursing system in a surgery unit in C university hospital, Seoul. Results: There was no statistically significant difference between average for patient satisfaction (4.24) before and (4.11) after application of the modified primary nursing system. Total average for nurse satisfaction with the nursing delivery system was 2.89 before application and, 3.34 after, indicating some significant differences (t=-4.06, p<.001). The KPCS-1 was 10.19 before application of the modified primary nursing system and 9.52 after application. Recalculated into direct nursing time, the average direct nursing time for one patient was 92 minutes before application, and 85.98 minutes after, indicating no significant difference. Conclusion: Through this research an attempt was made to build and test a modified primary nursing system. Results indicate that the most important thing is to clearly regulate office work and safely implement the new system.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.43 no.1
• /
• pp.49-53
• /
• 1998

Direct-seeding has major advantages such as labor and cost saving by eliminating preparation of seed bed and transplanting. But, it required increased input of fertilizers and pesticides because of the extended paddy period. Direct seeding in wet paddy (DSWP) gives faster growth and more uniform seedling emergence than direct-seeding in dry paddy. This research had an objective to develop an efficient N management practices for DSWP with split application of N fertilizer. A paddy field experiment was conducted to evaluate effects of starter N and N-topdressing which was delayed N application until 5-leaf stage, with comparison to transplanting (TP). Total amount of N application were two levels; 110kg and 77kg/ha. The N applications were split four times during rice growth stages; starter, topdressing at 5-leaf stage, top dressing at tillering stage, and topdressing at panicle initiation stage. DSWP had more tillers/$m^2$ than TP, but with the delayed heading. The DSWP plots which received N-topdressing at 5-leaf stage without starter N had higher leaf area index (LAI) and leaf greenness than the TP plot. Also, these DSWP plots had high leaf-N concentration at the heading stage, as calculated from leaf chlorophyll meter readings. Rice yield in DSWP with N-topdressing at 5-leaf stage was significantly higher than that in TP and in DSWP with starter N. Energy and N use efficiency were improved in DSWP with N-topdressing at 5-leaf stage. But, there were no significant differences in grain yield between the two levels of total amounts of N applications, 77kg and 110kg/ha. We concluded that starter N could not be used effectively by rice seedlings, but topdressing N at 5-leaf stage was an efficient N management for rice growth and yield in DSWP system.