• Food Science and Preservation
• /
• v.6 no.3
• /
• pp.276-280
• /
• 1999

To maintain the quality characteristics of vegetables, produce was dipped in Korean medical herb extracts (KMHE) such as Rheum palmatum L. or Coptis chinensis Franch with different concentration. Dipping in 500 ppm KMHE solution was suitable for the reduction or microbial load on cucumber, and 100 ppm KMHE solution was appropriate for others. Dipping time was suitable for produce about 10 minutes, and the temperature of dining solution had a limited effect cm the microbial load reduction. Antimicrobial activity of Coptis chinensis Franch and Rheum palmatum L. was maintained for cucumber and zucchini wrapped with polyvinylchloride film during storage at 10$^{\circ}C$.

• Textile Coloration and Finishing
• /
• v.16 no.3
• /
• pp.14-21
• /
• 2004

In this research, we accomplished in order to improving color fastness of sublimation for Poly (vinyl alcohol) (PVA)-iodine polarized film. The poor iodine sublimation problem has greatly improved by $O_2$ low temperature plasma treatment. We obtained the followings: (1) plasma treatment has contributed in adhesive ability via peel strength, AFM image and roughness were investigated, But the improvement in adhesive strength was not linearly proportional to the treatment time. (2) $O_2$ plasma treated PVA-iodine polarized film was good enough as to maintain the transmittance and polarization even after iodine cone. of 0.05mol/L and dipping time of 50sec. (3) $O_2$ low temperature plasma treated PVA-iodine polarized film has obtain high durability because of good adhesive strength.

• Journal of the Korean institute of surface engineering
• /
• v.30 no.5
• /
• pp.320-332
• /
• 1997

The development of colored surface on zinc coating by the oxidation of a melten alloy of zinc with a minor amount of oxygen-avid additive such as tianium has been studied. Using a galvanizing Zinc alloy containing 0.1 to 0.3wt%Ti, gold, purple or blue color was developed clearly and stably, depending upon the extent of oxidation, by air cooling after hot dipping in a bath at temperature of $550^{\circ}C$ to $600^{\circ}C$. The source of the color is light interference with surface oxide layer. THe final color depends on the thickness of the color depends on the thickness of $TiO_2$, played So compositing, temperature and time at elevated temperature after are all controlling variables. Since oxidation film such as $TiO_2$ played role of passivation film, the corrosion resistance in a colored galvanized steel sheet. It is also thought that surface oxide layer of $TiO_2$ inhibited dissolution of the coating layer.

• Applied Biological Chemistry
• /
• v.20 no.1
• /
• pp.66-80
• /
• 1977

This research was carried as a part of the basic study, in which the aptitude of theKorean oak varieties as barrels for aging apple fine spirits was investigated, and thefollowing results were obtained. 1. Following was the result of the chemical analysis of the fruits which are now mass-produced and can be used as a substitute for raw materials for wine production. Apple (Malus pumila Miller var. domestica Schneider) : Total sugar. total acid, volatile acid and pectin of Jonathan (Hong-og) were 13.95%, 0.46%, 0.012%, 0.20% respectively. Total sugar, total acid, volatile acid and pectin of Ralls (Koog-kwang) were 13.35%, 0.43%, 0.011%, 0.45% respectively. 2. Because of low yield of apple juice due to cellulose, pectin, hemicellulose which are present besides sugars, acids in apples, the apple juice were treated with xylanase of Aspergillus niger SUAFM-430, cellulase and pectinase of Aspergillus niger SUAFM-6. This treatment increased the yield of apple juice. And the apple juice was sterilized by adding potassium metabisulfite $(K_2S_20_5)$ and Saccharomyces cerevisae var. ellipsoideus Rasse Johannisberg II (SUAFM-1018) as a cultivation yeast, which has a strong fermentation power was used to ferment. The yield of apple wine based on raw material was 86-87%. The amount of ethanol, extract and methanol obtained from Jonathan and Ralls were 13.5%, 5.4%, 0.04-0.05% respectively. 3. Wines were distilled for two times by the pot still method to make fine spirits. The yield of fine spirits from apple wine mash was 86.6%, and the pH of fine spirits from Jonathan and Ralls were 4.1, 4.2 respectively. 4. The oak chips made of inner part or outer part of 24 Korean oak varieties were used to select the barrel for aging fine spirits. Two oak chips (one oak chip: $1{\times}1{\times}5cm$) of the inner part or of the outer part of each oak variety were dipped into 300 ml of fine spirits, which was bottled in 640ml beer bottle, and followed aging. The colors, flavors and tastes of the fine spirits were checked during 6 months. A. As a criterion for the first screening of oak barrels for aging fine spirits, the rate five of color extraction was determined. The oak chips showed good results in their order as follows and the best 5 varieties were selected. Gal-cham: Quercus aliena Blume (Inner part), Gul-cham: Quercus variabilis Blume (Outer part), Gal-chain: Quercus aliena Blume (Outer part), Jol-cham: Quercus serrata Thumb (Inner and Outer part). Sin-gal-cham: Quercus mongolica Fisher (Outer and Inner part) Sang-su-ri: Quercus acutissima Carruthers (Outer and Inner part) B. To find out the influence of aging temperature on aging, apple fine spirits were aged by dipping each oak chip at room temperature $(24-25^{\circ}C)$) and $45^{\circ}C$. Aging at $45^{\circ}C$ gave the best result followed aging at $30^{\circ}C$ and then at room temperature. C. Apple fine spirits was aged for six months by dipping oak chips in Erlenmeyer flasks and was irradiated with U.V light. The U.V irradiation enhanced the aging effect by nearly two times, compared with the aging without U.V irradiation. D. In aging apple fine spirits by dipping two oak chips, it was observed that the extent of the extraction of most components of oak chips were strongly dependent upon the pH of fine spirits. E. Oak chips of five selected oak varieties and a Limousin white oak from France as a control were used. Each apple fine spitits was dipped by two oak chips, and was aged at room temperature $(24-25^{\circ}C)$, $30^{\circ}C$, $45^{\circ}C$, and with the U.V irradiation at room temperature shaking every week. After six months of aging, the panel test of these aged fine spirits (Young Brandy) showed the following result. Young brandy of apples aged at $45^{\circ}C$ by dipping oak chips of Gal-chain was almost as the fine spirits which were aged at room temperature by dipping Limousin white oak chips from France. Young brandy of with U.V. irradiation at room temperature which were aged by dipping oak chips of Gal-chain was a little worse than that from the fine spirits aged at room temperature by dipping Limousin white oak chips from France. And so, Korean oak varieties are thought to be able to be used for aging every apple fine spirit which was here investigated.

• Research in Plant Disease
• /
• v.23 no.2
• /
• pp.168-176
• /
• 2017

Root-dipping inoculation method has been widely used to determine the resistance of watermelon to Fusarium oxysporum f. sp. niveum causing Fusarium wilt. Although this method leads to the precise results of plant disease responses, more rapid and efficient assay methods have been still required because the root-dipping inoculation method is labor-intensive and time-consuming. In this study, we established a simple and effective bioassay method based on the comparison of various inoculation methods and growth conditions. To develop the system, the occurrence of Fusarium wilt on four resistant and susceptible cultivars was investigated by four different inoculation methods, root-dipping, scalpel, tip and soil-drenching methods. Of these inoculation methods, scalpel method resulted in clear plant disease resistance responses with the simplicity. With the use of scalpel method, we also explored the disease development of the cultivars depending on inoculum concentration, growth stage of seedlings, and incubation temperature after inoculation. Furthermore, we found that the resistance degrees of 23 cultivars derived by scalpel inoculation method were similar to the results by root-dipping method established previously.

• Food Science and Biotechnology
• /
• v.15 no.6
• /
• pp.825-832
• /
• 2006

The effect of alginate coating in combination with an anti-browning agent on increasing the post-cutting shelf life and improving the quality of minimally processed apple cubes was studied during storage at room temperature for 5 days. A simple coating technique involving the chemical cross-linkage of alginate by calcium was used. Statistical-based experimental designs were applied to improve the quality of the alginate-coated apple cubes (ACAC). Plackett-Burman design was first used to determine the main factors influencing the preservation of the original weight, color, and texture of ACAC. Among these variables, alginate concentration ($X_1$), dipping time ($X_2$), and dipping temperature ($X_3$) significantly influenced the ACAC weight and color (confidence levels above 90%). Subsequently, the effects of the 3 main factors were further investigated by a central composite design. The polynomial models developed by response surface methodology were adequate to describe the relationships between the studied factors and the responses. Overall optimization conducted by superimposing the curves of the responses enabled the determination of an optimal range of the independent variables in which the five responses were simultaneously optimized. The point chosen as representative of this optimal area corresponded to $X_1=2.98%$, $X_2=0.85\;min$, and $X_3=55^{\circ}C$ and under these conditions the model predicted weight loss=0.522%, relative hardness=1.517, ${\Delta}E=1.423$, browning inhibition=93.403%, and ${\Delta}L=0.158$.

• Journal of fish pathology
• /
• v.5 no.2
• /
• pp.135-142
• /
• 1992

The absorption and excretion times of oxolinic acid(OX) used in farms as new aquatic antibiotics commonly were evaluated with determination of the effects of water temperature and feeding to parameters by using the bioassay technique. On the same time, antibacterial activity and the complex formation of oxolinic acid with serum proteins of two different fishes were compared to those oxytetracycline(OTC). With more than 10 times lower MIC values than those of OTC in the strains among 13 analyzed fish pathogens. OX did not show the decresed antibacterial activity by the binding of serum proteins in carp and tilapia. It implies more powerful potential of OX as aquatic medicine OTC. The serum concentration of OX after different administrations the oral, i.m., i.v and dipping methods were compared. The higher beginning concentration in serum and faster excretion times were obserbed in i.m. and dipping methods respectively. In the oral and i.m. administration, peak serum concentration after 24－48 hrs and slow excretion times demonstrated in both methods. These pharmacokinetic characteristics similar at $30^{\circ}C$ and $20^{\circ}C$ water temperature conditions, however, beginning serum concentration of OX in fish dipped in $50mg/\ell$ sol after starvation for 2 wks was appeared lower than those of fed fish. It suggests the importance of biological condition of the gill or skin for absorption of antibiotics after dipping administration.

• Textile Coloration and Finishing
• /
• v.31 no.4
• /
• pp.258-267
• /
• 2019

Synthetic suede without PFCs(perfluorinated compounds) are followed by subsequent high temperature treatment. But migration fastness of synthetic suede may be reduced due to sublimation of disperse dyes that results from the high temperature treatment. Therefore, in this study, chitosan treatment was used to improve the migration fastness before polyurethane dipping process. Polyester fiber was treated with sodium hydroxide aqueous solution before chitosan processing. This samples treated with a chitosan concentration upto 0.5% were dyed and coated with PUD(polyurethane dispersion). The migration fastness was most improved at 0.35% application. This is presumably due to the fact that the chitosan may increase the dye-binding capability through intermolecular hydrogen bonding.

• Journal of Life Science
• /
• v.26 no.3
• /
• pp.309-317
• /
• 2016

Industrial advancements have resulted in food culture development, followed by increased seafood consumption and large-scale seafood farming, which has been accompanied by an increased prevalence of fish disease. The antibiotic oxytetracycline (OTC) is commonly used to prevent and treat bacterial diseases in fish. However, overuse of OTC had led to negative aspects. In view of this, we conducted a research with regard to aspects of remnants on olive flounder skin, liver, and muscle through dipping treatment and oral feeding of OTC and analyzed the results with bioassay and HPLC quantitative analyses. The dipping treatment was carried out once with 25 g/ton/hr of OTC, and the oral treatment with 62.5 mg/kg body weight/7 days. The results underwent a bioassay analysis. The dipping group reacted only on the skin right after dipping, while the oral feeding group responded on the skin for 77 days after feeding and on the muscle for 14 days. In the dipping group, the HPLC quantitative analysis revealed remnants in the skin on the 37th day and on the 13th day in the liver group. No remnants were found in the muscle, even immediately after dipping. In the oral feeding group, there was a high concentration (1.07 mg/kg) of remnant in the skin, even on the 77th day. 0.56 mg/kg in the liver, even a small amount, and no remnant in the muscle on the 42nd day. To sum up, the results suggest that it will not be harmful to our body to observe the OTC withdrawal period of 40 days with the muscle because OTC will hardly remain on it. When using olive flounder for sashimi, the skin and liver should not be used for broth, as the quantity of OTC residue is several times higher than that found in muscle. As previous studies reported that the concentration of remnants gradually decreased with heating, so it was likely to lessen, depending on the cooking temperature.

• Research in Plant Disease
• /
• v.21 no.3
• /
• pp.201-207
• /
• 2015

This study was conducted to establish a simple mass-screening method for resistant melon to Fusarium wilt caused by Fusarium oxysporum f. sp. melonis (FOM). Root-dipping inoculation method has been used to investigate resistance of melon plants to Fusarium wilt. However, the inoculation method requires a lot of labor and time because of complicate procedure. To develop a simple screening method on melon Fusarium wilt, occurrence of Fusarium wilt on susceptible and resistant cultivars of melon according to inoculation method including root-dipping, soil-drenching, tip, and scalpel methods was investigated. Scalpel and tip methods showed more clear resistant and susceptible responses in the melon cultivars than root-dipping inoculation method, but tip method represented slightly variable disease severity. In contrast, in the case of soil-drenching inoculation method, disease severity of the susceptible cultivars was very low. Thus we selected scalpel method as inoculation method of a simple screening method for melon Fusarium wilt. By using the scalpel inoculation method, resistance degrees of the cultivars according to incubation temperature after inoculation (25 and $30^{\circ}C$) and inoculum concentration ($1{\times}10^6$ and $1{\times}10^7conidia/ml$) were measured. The resistance or susceptibility of the cultivars was hardly affected by all the tested conditions. To look into the effectiveness of scalpel inoculation methods, resistance of 22 commercial melon cultivars to FOM was compare with root-dipping inoculation method. When the melon cultivars were inoculated by scalpel method, resistance responses of all the tested cultivars were clearly distinguished as by root-dipping method. Taken together, we suggest that an efficient simple mass-screening method for resistant melon plant to Fusarium wilt is to sow the seeds of melon in a pot (70 ml of soil) and to grow the seedlings in a greenhouse ($25{\pm}5^{\circ}C$) for 7 days, to cut the root of seedlings with a scalpel and then pour a 10 ml-aliquot of the spore suspension of $1{\times}10^6conidia/ml$ on soil. The infected plants were cultivated in a growth room at 25 to $30^{\circ}C$ for about 3 weeks with 12-hr light a day.