• 한국재료학회지
• /
• 제8권5호
• /
• pp.419-423
• /
• 1998

매립형 InGaAnP/InP 레이저 다이오드 제작을 위한 질량 이동 현상의 최적화에 대한 연구를 수행하였다. Double heterostructure 레이저 다이오드 구조의 1차 성장은 액상 에피 성장 장치를 이용하였으며, 메사 에칭하였다. 활성층을 [110] 방향으로 선택적으로 에칭 한 후, 액상 에피 성장 장치를 이용하여 질량 이동 현상을 발생시켜 매립형 구조를 형성시켰다. 질량 이동 현상의 임계온도는 40분간 유지시켰을 때 $670^{\circ}C$로 나타났으며 재현성 있게 질량 이동 현상이 발생하였다. 질량 이동 현상에 의해 성장된 층의 폭은 온도증가에 따라 약간 증가하였다.

• 한국수소및신에너지학회논문집
• /
• 제27권6호
• /
• pp.773-782
• /
• 2016

The performance of the CT-TDLAS (computed tomography-tunable diode laser absorption spectroscopy) is strongly dependent upon the line broadening functions. The line of the laser beam used in the TDLAS is scattered by the natural broadening, the collisional broadening and the doppler broadening. The influence of the natural broadening to the experimental spectra obtained in the TDLAS is negligible. The influences of the collisional broadening and the doppler broadening to the experimental spectra are relatively large, in high pressure gas flows and in high temperature low pressure gas flows, respectively. In this study, optimal coefficients are proposed for the doppler broadening function by using the experimental data obtained in a flat burner test. The optimal coefficients were ${\gamma}_j=0.16$ and n=0.37. Using these coefficients, the temperature and concentration distributions at the engine exhaust gas pipe have been calculated showing their validities.

• 대한전자공학회논문지TE
• /
• 제37권1호
• /
• pp.27-34
• /
• 2000

본 논문에서는 SCH 양자우물 구조를 가진 레이저 다이오드에서의 캐리어 수송기구와 변조응답 특성에 대해 고찰하였다. 캐리어 수송구조 고찰을 위해 캐리어 밀도분포및 다이오드전류를 계산하였다. 또한 우물내에서의 캐리어 재결합율을 SCH길이의 함수로 도출하였다. 변조응답 특성에서는 캐리어와 광자에 대한 3쌍의 비율 방정식을 도출, 해석하여 SCH 길이에 따른 변조 대역폭과 완화 진동 주파수, 감쇄 비율과 K-factor의 특성에 대하여 고찰하였다.

• 정보저장시스템학회논문집
• /
• 제2권2호
• /
• pp.138-143
• /
• 2006

We developed a numerical simulator in order to study the Super-RENS/ROM (Super REsolution Near-Field Structure, Read Only Memory) using 3-dimensional FDTD (finite difference time domain) method. The simulation can be performed by three steps. In the first step, we utilized the vector-diffraction theory to calculate the characteristics of incident laser beam from the object-lens to the surface of the disk. At the second step, we fed the calculated result as an input for the main FDTD simulations on the optical layers in the disk structure. After performed the FDTD simulations, we took near-to-far field transformation for the reflected signal, from the surface of the disk to the detector. Finally, we can get reflected signal at the photo-diode. Using this developed simulator, we were able to study about the reading signal from various disk structures as a function of a laser beam position. We calculated reading signals for various pit sizes for Super-ROM structure, and it is found that the simple optical diffraction theory can not explain the reading mechanism of Super-ROM, and more complicated temperature dependent physics must be involved.

• 한국광학회지
• /
• 제3권1호
• /
• pp.43-49
• /
• 1992

Marx generator와 진공 다이오드, Bifilar helical wiggler, 인도자장 솔레노이드 등을 이용하여 마이크로파 영역의 자유전자 레이저를 설계 제작하였다. Bifilar helical wiggler의 자장분포를 분석하였고 공간전하의 수직성분 효ㅗ가를 고려하여 계산한 전자궤적 모의실험을 통하여 Wiggler자장이 전자빔 입사에 적합함을 확인하였다. Wiggler자장 300G, 인도자장 4.4kG, 전자빔 에너지 170keV일때 분산방정식에 의하여 계산된 출력 주파수는 약 11GHz였고 실험 결과 나타난 출력 주파수의 점위는 9.78GHz-11.7GHz로 추정되었다. 전자 속도의 축방향 퍼짐을 고려하여 이론적으로 이득을 계산하였다.

• Current Optics and Photonics
• /
• 제5권3호
• /
• pp.298-305
• /
• 2021

Modern distance sensing methods employ various measurement principles, including triangulation, time-of-flight, confocal, interferometric and frequency comb. Among them, the triangulation method, with a laser light source and an image sensor, is widely used in low-cost applications. We developed an omnidirectional two-dimensional (2D) distance sensor based on the triangulation principle for indoor floor mapping applications. The sensor has a range of 150-1500 mm with a relative resolution better than 4% over the range and 1% at 1 meter distance. It rotationally scans a compact one-dimensional (1D) distance sensor, composed of a near infrared (NIR) laser diode, a folding mirror, an imaging lens, and an image detector. We designed the sensor layout and configuration to satisfy the required measurement range and resolution, selecting easily available components in a special effort to reduce cost. We built a prototype and tested it with seven representative indoor wall specimens (white wallpaper, gray wallpaper, black wallpaper, furniture wood, black leather, brown leather, and white plastic) in a typical indoor illuminated condition, 200 lux, on a floor under ceiling mounted fluorescent lamps. We confirmed the proposed sensor provided reliable distance reading of all the specimens over the required measurement range (150-1500 mm) with a measurement resolution of 4% overall and 1% at 1 meter, regardless of illumination conditions.

• International Journal of Korean Welding Society
• /
• 제1권2호
• /
• pp.23-29
• /
• 2001

In this study, a preview-sensing visual sensor system is constructed far weld seam tracking in GMA welding. The visual sensor system consists of a CCD camera, a diode laser system with a cylindrical lens, and a band-pass-filter to overcome the degrading of image due to spatters and/or arc light. Among the image processing methods, Hough transform method is compared with the central difference method from a viewpoint of the capability for extracting the accurate feature position. As a result, it was revealed that Hough transform method can more accurately extract the feature positions and it can be applied to real time weld seam tracking. Image processing which includes Hough transform method is carried out to extract straight lines that express laser stripe. After extracting the lines, weld joint position and edge points are determined by intersecting the lines. Even though the image includes a spatter trace on it, it is possible to recognize the position of weld joint. Weld seam tracking was precisely implemented with adopting Hough transform method, and it is possible to track the weld seam in the case of offset angle is in the region of $\pm$ $15^{\circ}$.

• Clinical and Experimental Reproductive Medicine
• /
• 제28권2호
• /
• pp.147-153
• /
• 2001

Objective: The present study was performed to investigate the efficiency of partial laser assisted hatching (p-LAH; lased 1/2 ZP width from ZP edge) on hatching of mouse blastocysts. Methods: We used non-contact $1.48{\mu}m$ diode laser (MTM, Switzland) to create a precise hole on zona pellucida. 2-cell embryos were collected from the mouse (ICR) oviduct at 48 hours after hCG administration. Collected 2-cell embryos were cultured in the P-1 medium supplemented with 0.4% BSA. For experiments, embryos at 8-cell stage were used after $20{\sim}22$ hours in culture. After conventional (c-LAH) or partial laser assisted hatching, the embryos were further cultured in P-1 medium supplemented with 0.4% BSA for 3 days. To compare efficiency of complete and partial laser assisted hatching, hatching rate, hatching time and blastocyst diameter and zona pellucida thickness at hatching time were investigated. Embryos were examined every 12 hours. Blastocyst diameter and zona pellucida thickness at hatching time were measured with an ocular micrometer. Results: Hatching rates of p-LAH group (84.2%) was significantly higher than that of control group (39.3%), but there was no difference between the p-LAH (84.2%) and c-LAH (91.2%). p-LAH group was hatched 12 hours earlier than control group, but hatched 12 hours later than c-LAH group. The diameter of blastocyst at hatching time of p-LAH group ($113.1{\pm}6.4{\mu}m$) was smaller than that of control group ($122.2{\pm}5.0{\mu}m$), but larger than that of c-LAH group ($102.2{\pm}2.7{\mu}m$). Zona pellucida thickness at hatching time of p-LAH group ($6.4{\pm}0.9{\mu}m$) was thicker than that of control group ($4.5{\pm}1.5{\mu}m$), but thinner than that of c-LAH group ($10.0{\pm}0.8{\mu}m$). Conclusion: These results suggest that p-LAH may maintains the cell arrangement of early embryos to ensure successful development and prevent precocious hatching of blastocyst when compare to c-LAH and conventional (acidic tyrode) AH. Thus, p-LAH may provide a valuable and effective AH technique for human ART program.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.391-392
• /
• 2012

In these days, the desire for the precise and tiny displays in mobile application has been increased strongly. Currently, laser displays ranging from large-size laser TV to mobile projectors, are commercially available or due to appear on the market [1]. In order to achieve a mobile projectors, the semiconductor laser diodes should be used as a laser source due to their size and weight. In this presentation, the continuous etch characteristics of Pd and AlGaN/GaN superlattice for the fabrication of blue laser diodes were investigated by using inductively coupled $CHF_3$ and $Cl_2$ -based plasma. The GaN laser diode samples were grown on the sapphire (0001) substrate using a metal organic chemical vapor deposition system. A Si-doped GaN layer was grown on the substrate, followed by growth of LD structures, including the active layers of InGaN/GaN quantum well and barriers layer, as shown in other literature [2], and the palladium was used as a p-type ohmic contact metal. The etch rate of AlGaN/GaN superlattice (2.5/2.5 nm for 100 periods) and n-GaN by using $Cl_2$ (90%)/Ar (10%) and $Cl_2$ (50%)/$CHF_3$ (50%) plasma chemistry, respectively. While when the $Cl_2$/Ar plasma were used, the etch rate of AlGaN/GaN superlattice shows a similar etch rate as that of n-GaN, the $Cl_2/CHF_3$ plasma shows decreased etch rate, compared with that of $Cl_2$/Ar plasma, especially for AlGaN/GaN superlattice. Furthermore, it was also found that the Pd which is deposited on top of the superlattice couldn't be etched with $Cl_2$/Ar plasma. It was indicating that the etching step should be separated into 2 steps for the Pd etching and the superlattice etching, respectively. The etched surface of stacked Pd/superlattice as a result of 2-step etching process including Pd etching ($Cl_2/CHF_3$) and SLs ($Cl_2$/Ar) etching, respectively. EDX results shows that the etched surface is a GaN waveguide free from the Al, indicating the SLs were fully removed by etching. Furthermore, the optical and electrical properties will be also investigated in this presentation. In summary, Pd/AlGaN/GaN SLs were successfully etched exploiting noble 2-step etching processes.

• 구강회복응용과학지
• /
• 제40권2호
• /
• pp.55-63
• /
• 2024

목적: 이 연구의 목적은 거친 티타늄 표면에 형성된 Staphylococcus aureus 바이오필름에 대해 인도시아닌 그린을 활용한 광역학치료(photodynamic therapy; PDT)의 항미생물 효과를 평가하고, 이를 임상에서 널리 사용되는 다른 화학 처치 방법과 비교하는 것이다. 연구 재료 및 방법: 멸균된 거친 표면 티타늄 디스크에 S. aureus ATCC 25923을 접종한 후 48시간 동안 배양하여 바이오필름을 형성하였다. 실험은 대조군, 클로르헥시딘군(CHX), 테트라싸이클린군(TC), 인도시아닌 그린군(ICG), 인도시아닌 그린을 활용한 광역학치료군(ICG-PDT)으로 구분하여 진행하였다. 군에 따른 처리 후 세균을 배양하여 세균 수(colony forming unit; CFU)를 계산하고, 바이오필름을 공초점 현미경을 통해 분석하였다. 통계 분석은 CFU값을 로그값으로 변환한 후 분산 분석을 시행하였다. 결과: 모든 실험군은 대조군과 비교하여 유의한 항미생물 효과를 나타냈으며(P < 0.05), 특히 CHX, TC, PDT 군에서 90% 이상의 유의한 효과를 보였다(P < 0.01). CHX 군은 TC, PDT 군과 유의한 차이를 보이지 않았으나(P > 0.05), PDT 군은 TC보다 유의하게 효과적이었다(P = 0.035). 공초점현미경 상에서 PDT 군에서 사균의 비율이 더 높게 관찰되었다. 결론: 이번 연구를 통해 인도시아닌 그린을 활용한 광역학치료가 SLA 티타늄 표면에 형성된 S. aureus 바이오필름 제거에 있어 효과적임을 확인하였다.