• 대한치과의사협회지
• /
• 제56권7호
• /
• pp.391-397
• /
• 2018

Mess removal, electrocoagulation, cryosurgery are conventional methods in the treatment of various oral mucosal diseases. However, there are several problems or complication during or after surgery using conventional tools. Recently, LASER gradually become useful tool in the surgery of oral mucosal diseases. Of the LASER, carbon dioxide-mediated LASER is widely used one. Carbon dioxide LASER has many advantages such as good bleeding control, decreased damage to adjacent tissue, decreased pain and swelling, reduced scar formation, even bacteriocidal effects. In this reports, the author describe pros and cons of LASER, especially focused on carbon dioxide, and shed light on the field of LASER application in treatment of various oral mucosal diseases.

• 한국근적외분광분석학회:학술대회논문집
• /
• 한국근적외분광분석학회 2001년도 NIR-2001
• /
• pp.3123-3123
• /
• 2001

Near infrared (NIR) spectroscopy has become a widely used method in food and beverage analysis because of its speed, accuracy and the simplicity of sample preparation. One of the basic requirements of NIR instruments is a wide dynamic range if weak, or small, absorption changes or concentrations are to be measured. Thus the instrument must be sufficiently luminous, and efficient, to enable measurements to be made in a reasonably short time, as for some applications (e.g. sorting) short response times are essential. Diode lasers function the same way as lasers but linewidths are not as narrow as typical lasers. In this work an array of seven laser diodes (in the range of 750-1100 nm) with energy outputs of around hundred milliwatts each were combined with a fast diode array spectrometer (400-1100 nm, 1024 pixels, integration time from 3 ms) as detector. Measurements in transmission mode were performed in solutions of sugars in aqueous solutions and in deuteriumoxide. The feasibility of non-destructive measurements in transmission mode was investigated for different fruits and vegetables.

• 한국정보통신학회논문지
• /
• 제10권4호
• /
• pp.718-723
• /
• 2006

초고속 정보통신망의 구축에 있어 광모듈은 중요한 부분을 차지하고 있다. 그 중에서 광원인 레이저 다이오드는 온도에 변화에 대해 성능이 크게 좌우되므로, 많은 연구가 이루어지고 있다. 본 논문은 평면 매립형 레이저 다이오드를 비율 방정식에 의하여 전기적 등가회로로 변환하였다. 그리고, 누설 경로에 해당하는 활성층 바깥 영역을 다이오드와 두 개의 트랜지스터로 등가화한 후, 시뮬레이션을 통해 누설전류를 해석하였다. 시뮬레이션을 통해 누설전류를 줄이기 위한 전류차단층의 도핑농도를 조사하였다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 추계학술대회논문집
• /
• pp.391-394
• /
• 2003

Laser direct writing process is developed 3rd harmonic Diode Pumped Solid State Laser with the near visible wavelength of 355 m sensitive polymer is irradiated by UV laser and developed using polymer solvent to obtain quasi-3D. It is important to reduce line width for image mode waveguides, so some investigations will be carried out in various conditions of process parameters such as laser power, writing speed, laser focus and optical properties of polymer. This process could be to fabricate a single mode waveguide without expensive mask projection method. Experimentally, the patterns of trapezoidal shape were manufactured into dimension of 8.4 mm width and 7.5 mm height. Propagation loss of straight waveguide measured 3 dB/cm at 1,550 nm.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2015년도 제46회 하계학술대회
• /
• pp.1134-1135
• /
• 2015

In this paper, we reported fabrication of sealing the glass substrate using laser treatment at low temperature for electrochemical luminescence (ECL) cell. The laser treatment at temperature is using laser diode. The glass substrate sealing by laser treatment tested at 1-5 W, 1-5 mm/s for builted and tested. The sealing laser treatment method will allow associate coordination between the two glass substrate was enclosed. The effect of laser treatment to sealing the glass substrate was found to have cracks and air gap at best thickness of about $845-780{\mu}m$ for condition 5 W, 1-5 mm/s. The surface of sealing was roughness which was not influent to electrodes So, it is more effective viscosity between two glasses substrate.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2007년 추계학술발표대회 개요집
• /
• pp.177-180
• /
• 2007

The laser welding process was effective way to join the metals, because of the high productivity, the low distortion and the good weld quality. The fiber laser used the double-clad fiber architecture, the single element diode laser and the fully-spliced side pumping. It has the advantages in the views of the energy conversion efficiency, the beam quality, the robustness and the mobility. Recently, the thick material was welded with the high power laser in ship building or construction industry owing to the super bright fiber laser. In this study, we introduced the characteristics of high power fiber laser and its welding performance of thick gauge materials.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.1496-1499
• /
• 2009

A diode-pumped Nd:$YVO_4$ laser was used to obtain indium tin oxide (ITO) patterns on glass substrate with various overlapping rates. The results showed that the overlapping rate of laser beam influences on the edge structure of ITO pattern and the surface roughness of ablated groove bottom. At a laser repetition rate of 40 kHz, the optimized condition of overlapping rate was 75 %.

• 반도체디스플레이기술학회지
• /
• 제18권3호
• /
• pp.72-76
• /
• 2019

A Q-switched diode-pumped neodymium-doped yttrium vanadate (YVO₄, λ =1064nm) laser was used for the direct patterning of indium tin oxide (ITO) films on glass substrate. During the laser direct patterning, the laser beam was incident on the two different directions of glass substrate and the laser ablated patterns were compared and analyzed. At a low scanning speed of laser beam, the larger laser etched lines were obtained by laser beam incident in reverse side of glass substrate. On the contrary, at a higher scanning speed, the larger etched pattern sizes were found in case of the beam incidence from front side of glass substrate. Furthermore, it was impossible to find no ablated patterns in some laser beam conditions for the laser beam from reverse side at a much higher scanning speed and repetition rate of laser beam. The laser beam is expected to be transferred and scattered through the glass substrate and the laser beam energy is thought to be also dispersed and much more influenced by the overlapping of each laser beam spot.

• 마이크로전자및패키징학회지
• /
• 제26권3호
• /
• pp.7-13
• /
• 2019

In this paper, the principles, types and characteristics of the laser and laser soldering are introduced. Laser soldering methods for electronics, metals, semiconductors are also presented. Laser soldering is a non-contact process that transfers energy to solder joint by a precisely controlled beam. Demands for laser soldering are increasing due to bonding for complex circuits and local heating in micro joint. Laser absorption ratio depends on materials, and each material has different absorption or reflectivity of the laser beam, which requires fine adjustment of the laser beam. Laser types and operating conditions are also important factors for laser soldering performance. In this paper, the performance of Nd:YAG laser soldering is compared to the hot blast reflow. Meanwhile, a diode laser gives different wavelength and smaller parts with high performance, but it has various reliability issues such as heat loss, high power, and cooling technology. These issues need to be improved in the future, and further studies for laser micro-joining and soldering are required.

• 한국임상수의학회지
• /
• 제32권4호
• /
• pp.295-300
• /
• 2015

본 연구의 목적은 알지네이트 비드에서 배양한 토끼의 관절 연골세포의 증식과 황산화 글리코스아미노글리칸 합성에 대한 808-nm InGaAs 다이오드 레이저의 효과를 확인하는 것이다. 이전의 연구들에서 서로 다른 종류의 세포에서 레이저의 양성 또는 음성 자극 효과가 알려졌다. 알지네이트 비드 내의 토끼 연골세포에 1.0W 세기의 808-nm InGaAs 다이오드 레이저가 $31J/cm^2$ (1 그룹), $62J/cm^2$ (2 그룹)의 에너지 밀도로 상응하는 그룹에 10초, 20초 동안 24, 48, 72, 96시간째에 각각 조사되었다. 대조군은 처리하지 않았다. 1차 레이저 조사 1주, 2주 후에 MTT 분석이 실시되었다. 황산화 글리코스아미노글리칸 합성은 DMMB 분석을 통해 평가되었다. 조직학적 평가를 위한 세포의 분포와 세포 주변의 황산화 글리코스아미노글리칸 침착은 알시안 블루 염색을 통해 평가되었다. MTT 분석을 통해 알지네이트 비드에서 세포 증식에는 양성 자극 효과가 없음을 알 수 있었다. DMMB 분석을 통해서 2 그룹의 2주차 연골세포에서 황산화 글리코스아미노글리칸 생성이 특이적으로 증가했음을 알 수 있었다. 알시안 블루 염색상에서도 2 그룹 연골세포에서 양성 염색상이 특이적으로 많은 비율을 차지함을 알 수 있었다. 본 연구를 통해 1.0 W 세기의 808-nm InGaAs 다이오드 레이저가 연골세포 증식에 영향이 없으나 알지네이트 비드에서 세포 분비 활동을 자극하여 황산화 글리코스아미노글리칸 침착을 증가시킬 수 있음을 확인하였다.